schrodinger.ui.qt.recent_completer module

class schrodinger.ui.qt.recent_completer.StringListModelInterface(prefkey=None, suggestion_limit=20)

Bases: object

Interface for Qt classes that can use a QStringListModel.

You add to the QStringListModel by calling addSuggestion. If a prefkey is passed to the init, then these suggestions will be stored in Maestro, and reloaded next time the widget is created

__init__(prefkey=None, suggestion_limit=20)
Parameters:
  • prefkey (str or None) – if defined, a unique string that defines where this object’s suggestions can be saved to and loaded from persistently
  • suggestion_limit – the maximum number of suggestions that this object will store; must be a nonnegative integer or None
suggestion_limit
Returns:the maximum number of completion suggestions that this object will remember; if None, there is no limit.
Return type:int or None
setSuggestions(suggestions)

Replace the current set of completion suggestions with the supplied values.

Parameters:suggestions – a new list of completion suggestions to set on this object
Rtype suggestions:
 list(str)
addSuggestion(new_suggestion)

Add a new completion suggestion to this object. If it already exists in this object, put it to the top of the list to indicate that it the most recent suggestion.

Parameters:new_suggestion (str) – a new completion suggestion
class schrodinger.ui.qt.recent_completer.RecentCombo

Bases: PyQt5.QtWidgets.QComboBox, schrodinger.ui.qt.recent_completer.StringListModelInterface

A QComboBox which is able to store its past values in Maestro persistent settings. You add to this combobox by using addSuggestion.

When adding a suggestion, the model gets reset in the process, which may clear selection and emit a signal indicating that the seleciton has changed.

AdjustToContents = 0
AdjustToContentsOnFirstShow = 1
AdjustToMinimumContentsLength = 2
AdjustToMinimumContentsLengthWithIcon = 3
DrawChildren = 2
DrawWindowBackground = 1
IgnoreMask = 4
InsertAfterCurrent = 4
InsertAlphabetically = 6
InsertAtBottom = 3
InsertAtCurrent = 2
InsertAtTop = 1
InsertBeforeCurrent = 5
class InsertPolicy

Bases: int

__init__

Initialize self. See help(type(self)) for accurate signature.

bit_length() → int

Number of bits necessary to represent self in binary. >>> bin(37) ‘0b100101’ >>> (37).bit_length() 6

conjugate()

Returns self, the complex conjugate of any int.

denominator

the denominator of a rational number in lowest terms

from_bytes(bytes, byteorder, *, signed=False) → int

Return the integer represented by the given array of bytes.

The bytes argument must be a bytes-like object (e.g. bytes or bytearray).

The byteorder argument determines the byte order used to represent the integer. If byteorder is ‘big’, the most significant byte is at the beginning of the byte array. If byteorder is ‘little’, the most significant byte is at the end of the byte array. To request the native byte order of the host system, use `sys.byteorder’ as the byte order value.

The signed keyword-only argument indicates whether two’s complement is used to represent the integer.

imag

the imaginary part of a complex number

numerator

the numerator of a rational number in lowest terms

real

the real part of a complex number

to_bytes(length, byteorder, *, signed=False) → bytes

Return an array of bytes representing an integer.

The integer is represented using length bytes. An OverflowError is raised if the integer is not representable with the given number of bytes.

The byteorder argument determines the byte order used to represent the integer. If byteorder is ‘big’, the most significant byte is at the beginning of the byte array. If byteorder is ‘little’, the most significant byte is at the end of the byte array. To request the native byte order of the host system, use `sys.byteorder’ as the byte order value.

The signed keyword-only argument determines whether two’s complement is used to represent the integer. If signed is False and a negative integer is given, an OverflowError is raised.

NoInsert = 0
class PaintDeviceMetric

Bases: int

__init__

Initialize self. See help(type(self)) for accurate signature.

bit_length() → int

Number of bits necessary to represent self in binary. >>> bin(37) ‘0b100101’ >>> (37).bit_length() 6

conjugate()

Returns self, the complex conjugate of any int.

denominator

the denominator of a rational number in lowest terms

from_bytes(bytes, byteorder, *, signed=False) → int

Return the integer represented by the given array of bytes.

The bytes argument must be a bytes-like object (e.g. bytes or bytearray).

The byteorder argument determines the byte order used to represent the integer. If byteorder is ‘big’, the most significant byte is at the beginning of the byte array. If byteorder is ‘little’, the most significant byte is at the end of the byte array. To request the native byte order of the host system, use `sys.byteorder’ as the byte order value.

The signed keyword-only argument indicates whether two’s complement is used to represent the integer.

imag

the imaginary part of a complex number

numerator

the numerator of a rational number in lowest terms

real

the real part of a complex number

to_bytes(length, byteorder, *, signed=False) → bytes

Return an array of bytes representing an integer.

The integer is represented using length bytes. An OverflowError is raised if the integer is not representable with the given number of bytes.

The byteorder argument determines the byte order used to represent the integer. If byteorder is ‘big’, the most significant byte is at the beginning of the byte array. If byteorder is ‘little’, the most significant byte is at the end of the byte array. To request the native byte order of the host system, use `sys.byteorder’ as the byte order value.

The signed keyword-only argument determines whether two’s complement is used to represent the integer. If signed is False and a negative integer is given, an OverflowError is raised.

PdmDepth = 6
PdmDevicePixelRatio = 11
PdmDevicePixelRatioScaled = 12
PdmDpiX = 7
PdmDpiY = 8
PdmHeight = 2
PdmHeightMM = 4
PdmNumColors = 5
PdmPhysicalDpiX = 9
PdmPhysicalDpiY = 10
PdmWidth = 1
PdmWidthMM = 3
class RenderFlag

Bases: int

__init__

Initialize self. See help(type(self)) for accurate signature.

bit_length() → int

Number of bits necessary to represent self in binary. >>> bin(37) ‘0b100101’ >>> (37).bit_length() 6

conjugate()

Returns self, the complex conjugate of any int.

denominator

the denominator of a rational number in lowest terms

from_bytes(bytes, byteorder, *, signed=False) → int

Return the integer represented by the given array of bytes.

The bytes argument must be a bytes-like object (e.g. bytes or bytearray).

The byteorder argument determines the byte order used to represent the integer. If byteorder is ‘big’, the most significant byte is at the beginning of the byte array. If byteorder is ‘little’, the most significant byte is at the end of the byte array. To request the native byte order of the host system, use `sys.byteorder’ as the byte order value.

The signed keyword-only argument indicates whether two’s complement is used to represent the integer.

imag

the imaginary part of a complex number

numerator

the numerator of a rational number in lowest terms

real

the real part of a complex number

to_bytes(length, byteorder, *, signed=False) → bytes

Return an array of bytes representing an integer.

The integer is represented using length bytes. An OverflowError is raised if the integer is not representable with the given number of bytes.

The byteorder argument determines the byte order used to represent the integer. If byteorder is ‘big’, the most significant byte is at the beginning of the byte array. If byteorder is ‘little’, the most significant byte is at the end of the byte array. To request the native byte order of the host system, use `sys.byteorder’ as the byte order value.

The signed keyword-only argument determines whether two’s complement is used to represent the integer. If signed is False and a negative integer is given, an OverflowError is raised.

class RenderFlags

Bases: sip.simplewrapper

QWidget.RenderFlags(Union[QWidget.RenderFlags, QWidget.RenderFlag]) QWidget.RenderFlags(QWidget.RenderFlags)

__init__

Initialize self. See help(type(self)) for accurate signature.

class SizeAdjustPolicy

Bases: int

__init__

Initialize self. See help(type(self)) for accurate signature.

bit_length() → int

Number of bits necessary to represent self in binary. >>> bin(37) ‘0b100101’ >>> (37).bit_length() 6

conjugate()

Returns self, the complex conjugate of any int.

denominator

the denominator of a rational number in lowest terms

from_bytes(bytes, byteorder, *, signed=False) → int

Return the integer represented by the given array of bytes.

The bytes argument must be a bytes-like object (e.g. bytes or bytearray).

The byteorder argument determines the byte order used to represent the integer. If byteorder is ‘big’, the most significant byte is at the beginning of the byte array. If byteorder is ‘little’, the most significant byte is at the end of the byte array. To request the native byte order of the host system, use `sys.byteorder’ as the byte order value.

The signed keyword-only argument indicates whether two’s complement is used to represent the integer.

imag

the imaginary part of a complex number

numerator

the numerator of a rational number in lowest terms

real

the real part of a complex number

to_bytes(length, byteorder, *, signed=False) → bytes

Return an array of bytes representing an integer.

The integer is represented using length bytes. An OverflowError is raised if the integer is not representable with the given number of bytes.

The byteorder argument determines the byte order used to represent the integer. If byteorder is ‘big’, the most significant byte is at the beginning of the byte array. If byteorder is ‘little’, the most significant byte is at the end of the byte array. To request the native byte order of the host system, use `sys.byteorder’ as the byte order value.

The signed keyword-only argument determines whether two’s complement is used to represent the integer. If signed is False and a negative integer is given, an OverflowError is raised.

__init__

Initialize self. See help(type(self)) for accurate signature.

__len__

Return len(self).

acceptDrops(self) → bool
accessibleDescription(self) → str
accessibleName(self) → str
actionEvent(self, QActionEvent)
actions(self) → List[QAction]
activateWindow(self)
activated

activated(self, int) [signal] activated(self, str) [signal]

addAction(self, QAction)
addActions(self, object)
addItem(self, str, userData: Any = None)

addItem(self, QIcon, str, userData: Any = None)

addItems(self, Iterable[str])
addSuggestion(new_suggestion)

Add a new completion suggestion to this object. If it already exists in this object, put it to the top of the list to indicate that it the most recent suggestion.

Parameters:new_suggestion (str) – a new completion suggestion
adjustSize(self)
autoFillBackground(self) → bool
backgroundRole(self) → QPalette.ColorRole
baseSize(self) → QSize
blockSignals(self, bool) → bool
changeEvent(self, QEvent)
childAt(self, QPoint) → QWidget

childAt(self, int, int) -> QWidget

childEvent(self, QChildEvent)
children(self) → object
childrenRect(self) → QRect
childrenRegion(self) → QRegion
clear(self)
clearEditText(self)
clearFocus(self)
clearMask(self)
close(self) → bool
closeEvent(self, QCloseEvent)
colorCount(self) → int
completer(self) → QCompleter
connectNotify(self, QMetaMethod)
contentsMargins(self) → QMargins
contentsRect(self) → QRect
contextMenuEvent(self, QContextMenuEvent)
contextMenuPolicy(self) → Qt.ContextMenuPolicy
count(self) → int
create(self, window: sip.voidptr = 0, initializeWindow: bool = True, destroyOldWindow: bool = True)
createWindowContainer(QWindow, parent: QWidget = None, flags: Union[Qt.WindowFlags, Qt.WindowType] = 0) → QWidget
currentData(self, role: int = Qt.UserRole) → Any
currentIndex(self) → int
currentIndexChanged

currentIndexChanged(self, int) [signal] currentIndexChanged(self, str) [signal]

currentText(self) → str
currentTextChanged

currentTextChanged(self, str) [signal]

cursor(self) → QCursor
customContextMenuRequested

customContextMenuRequested(self, QPoint) [signal]

customEvent(self, QEvent)
deleteLater(self)
depth(self) → int
destroy(self, destroyWindow: bool = True, destroySubWindows: bool = True)
destroyed

destroyed(self, QObject = None) [signal]

devType(self) → int
devicePixelRatio(self) → int
devicePixelRatioF(self) → float
devicePixelRatioFScale() → float
disconnect(self)
disconnectNotify(self, QMetaMethod)
dragEnterEvent(self, QDragEnterEvent)
dragLeaveEvent(self, QDragLeaveEvent)
dragMoveEvent(self, QDragMoveEvent)
dropEvent(self, QDropEvent)
dumpObjectInfo(self)
dumpObjectTree(self)
duplicatesEnabled(self) → bool
dynamicPropertyNames(self) → object
editTextChanged

editTextChanged(self, str) [signal]

effectiveWinId(self) → sip.voidptr
ensurePolished(self)
enterEvent(self, QEvent)
event(self, QEvent) → bool
eventFilter(self, QObject, QEvent) → bool
find(sip.voidptr) → QWidget
findChild(self, type, name: str = '', options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) → QObject

findChild(self, Tuple, name: str = ‘’, options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) -> QObject

findChildren(self, type, name: str = '', options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, Tuple, name: str = ‘’, options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) -> List[QObject] findChildren(self, type, QRegExp, options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) -> List[QObject] findChildren(self, Tuple, QRegExp, options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) -> List[QObject] findChildren(self, type, QRegularExpression, options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) -> List[QObject] findChildren(self, Tuple, QRegularExpression, options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) -> List[QObject]

findData(self, Any, role: int = Qt.UserRole, flags: Union[Qt.MatchFlags, Qt.MatchFlag] = Qt.MatchExactly|Qt.MatchCaseSensitive) → int
findText(self, str, flags: Union[Qt.MatchFlags, Qt.MatchFlag] = Qt.MatchExactly|Qt.MatchCaseSensitive) → int
focusInEvent(self, QFocusEvent)
focusNextChild(self) → bool
focusNextPrevChild(self, bool) → bool
focusOutEvent(self, QFocusEvent)
focusPolicy(self) → Qt.FocusPolicy
focusPreviousChild(self) → bool
focusProxy(self) → QWidget
focusWidget(self) → QWidget
font(self) → QFont
fontInfo(self) → QFontInfo
fontMetrics(self) → QFontMetrics
foregroundRole(self) → QPalette.ColorRole
frameGeometry(self) → QRect
frameSize(self) → QSize
geometry(self) → QRect
getContentsMargins(self) → Tuple[int, int, int, int]
grab(self, rectangle: QRect = QRect(QPoint(0, 0), QSize(-1, -1))) → QPixmap
grabGesture(self, Qt.GestureType, flags: Union[Qt.GestureFlags, Qt.GestureFlag] = Qt.GestureFlags())
grabKeyboard(self)
grabMouse(self)

grabMouse(self, Union[QCursor, Qt.CursorShape])

grabShortcut(self, Union[QKeySequence, QKeySequence.StandardKey, str, int], context: Qt.ShortcutContext = Qt.WindowShortcut) → int
graphicsEffect(self) → QGraphicsEffect
graphicsProxyWidget(self) → QGraphicsProxyWidget
hasFocus(self) → bool
hasFrame(self) → bool
hasHeightForWidth(self) → bool
hasMouseTracking(self) → bool
hasTabletTracking(self) → bool
height(self) → int
heightForWidth(self, int) → int
heightMM(self) → int
hide(self)
hideEvent(self, QHideEvent)
hidePopup(self)
highlighted

highlighted(self, int) [signal] highlighted(self, str) [signal]

iconSize(self) → QSize
inherits(self, str) → bool
initPainter(self, QPainter)
initStyleOption(self, QStyleOptionComboBox)
inputMethodEvent(self, QInputMethodEvent)
inputMethodHints(self) → Qt.InputMethodHints
inputMethodQuery(self, Qt.InputMethodQuery) → Any

inputMethodQuery(self, Qt.InputMethodQuery, Any) -> Any

insertAction(self, QAction, QAction)
insertActions(self, QAction, Iterable[QAction])
insertItem(self, int, str, userData: Any = None)

insertItem(self, int, QIcon, str, userData: Any = None)

insertItems(self, int, Iterable[str])
insertPolicy(self) → QComboBox.InsertPolicy
insertSeparator(self, int)
installEventFilter(self, QObject)
isActiveWindow(self) → bool
isAncestorOf(self, QWidget) → bool
isEditable(self) → bool
isEnabled(self) → bool
isEnabledTo(self, QWidget) → bool
isFullScreen(self) → bool
isHidden(self) → bool
isLeftToRight(self) → bool
isMaximized(self) → bool
isMinimized(self) → bool
isModal(self) → bool
isRightToLeft(self) → bool
isSignalConnected(self, QMetaMethod) → bool
isVisible(self) → bool
isVisibleTo(self, QWidget) → bool
isWidgetType(self) → bool
isWindow(self) → bool
isWindowModified(self) → bool
isWindowType(self) → bool
itemData(self, int, role: int = Qt.UserRole) → Any
itemDelegate(self) → QAbstractItemDelegate
itemIcon(self, int) → QIcon
itemText(self, int) → str
keyPressEvent(self, QKeyEvent)
keyReleaseEvent(self, QKeyEvent)
keyboardGrabber() → QWidget
killTimer(self, int)
layout(self) → QLayout
layoutDirection(self) → Qt.LayoutDirection
leaveEvent(self, QEvent)
lineEdit(self) → QLineEdit
locale(self) → QLocale
logicalDpiX(self) → int
logicalDpiY(self) → int
lower(self)
mapFrom(self, QWidget, QPoint) → QPoint
mapFromGlobal(self, QPoint) → QPoint
mapFromParent(self, QPoint) → QPoint
mapTo(self, QWidget, QPoint) → QPoint
mapToGlobal(self, QPoint) → QPoint
mapToParent(self, QPoint) → QPoint
mask(self) → QRegion
maxCount(self) → int
maxVisibleItems(self) → int
maximumHeight(self) → int
maximumSize(self) → QSize
maximumWidth(self) → int
metaObject(self) → QMetaObject
metric(self, QPaintDevice.PaintDeviceMetric) → int
minimumContentsLength(self) → int
minimumHeight(self) → int
minimumSize(self) → QSize
minimumSizeHint(self) → QSize
minimumWidth(self) → int
model(self) → QAbstractItemModel
modelColumn(self) → int
mouseDoubleClickEvent(self, QMouseEvent)
mouseGrabber() → QWidget
mouseMoveEvent(self, QMouseEvent)
mousePressEvent(self, QMouseEvent)
mouseReleaseEvent(self, QMouseEvent)
move(self, QPoint)

move(self, int, int)

moveEvent(self, QMoveEvent)
moveToThread(self, QThread)
nativeEvent(self, Union[QByteArray, bytes, bytearray], sip.voidptr) → Tuple[bool, int]
nativeParentWidget(self) → QWidget
nextInFocusChain(self) → QWidget
normalGeometry(self) → QRect
objectName(self) → str
objectNameChanged

objectNameChanged(self, str) [signal]

overrideWindowFlags(self, Union[Qt.WindowFlags, Qt.WindowType])
overrideWindowState(self, Union[Qt.WindowStates, Qt.WindowState])
paintEngine(self) → QPaintEngine
paintEvent(self, QPaintEvent)
paintingActive(self) → bool
palette(self) → QPalette
parent(self) → QObject
parentWidget(self) → QWidget
physicalDpiX(self) → int
physicalDpiY(self) → int
pos(self) → QPoint
previousInFocusChain(self) → QWidget
property(self, str) → Any
pyqtConfigure(...)

Each keyword argument is either the name of a Qt property or a Qt signal. For properties the property is set to the given value which should be of an appropriate type. For signals the signal is connected to the given value which should be a callable.

raise_(self)
receivers(self, PYQT_SIGNAL) → int
rect(self) → QRect
releaseKeyboard(self)
releaseMouse(self)
releaseShortcut(self, int)
removeAction(self, QAction)
removeEventFilter(self, QObject)
removeItem(self, int)
render(self, QPaintDevice, targetOffset: QPoint = QPoint(), sourceRegion: QRegion = QRegion(), flags: Union[QWidget.RenderFlags, QWidget.RenderFlag] = QWidget.RenderFlags(QWidget.DrawWindowBackground|QWidget.DrawChildren))

render(self, QPainter, targetOffset: QPoint = QPoint(), sourceRegion: QRegion = QRegion(), flags: Union[QWidget.RenderFlags, QWidget.RenderFlag] = QWidget.RenderFlags(QWidget.DrawWindowBackground|QWidget.DrawChildren))

repaint(self)

repaint(self, int, int, int, int) repaint(self, QRect) repaint(self, QRegion)

resize(self, QSize)

resize(self, int, int)

resizeEvent(self, QResizeEvent)
restoreGeometry(self, Union[QByteArray, bytes, bytearray]) → bool
rootModelIndex(self) → QModelIndex
saveGeometry(self) → QByteArray
scroll(self, int, int)

scroll(self, int, int, QRect)

sender(self) → QObject
senderSignalIndex(self) → int
setAcceptDrops(self, bool)
setAccessibleDescription(self, str)
setAccessibleName(self, str)
setAttribute(self, Qt.WidgetAttribute, on: bool = True)
setAutoFillBackground(self, bool)
setBackgroundRole(self, QPalette.ColorRole)
setBaseSize(self, int, int)

setBaseSize(self, QSize)

setCompleter(self, QCompleter)
setContentsMargins(self, int, int, int, int)

setContentsMargins(self, QMargins)

setContextMenuPolicy(self, Qt.ContextMenuPolicy)
setCurrentIndex(self, int)
setCurrentText(self, str)
setCursor(self, Union[QCursor, Qt.CursorShape])
setDisabled(self, bool)
setDuplicatesEnabled(self, bool)
setEditText(self, str)
setEditable(self, bool)
setEnabled(self, bool)
setFixedHeight(self, int)
setFixedSize(self, QSize)

setFixedSize(self, int, int)

setFixedWidth(self, int)
setFocus(self)

setFocus(self, Qt.FocusReason)

setFocusPolicy(self, Qt.FocusPolicy)
setFocusProxy(self, QWidget)
setFont(self, QFont)
setForegroundRole(self, QPalette.ColorRole)
setFrame(self, bool)
setGeometry(self, QRect)

setGeometry(self, int, int, int, int)

setGraphicsEffect(self, QGraphicsEffect)
setHidden(self, bool)
setIconSize(self, QSize)
setInputMethodHints(self, Union[Qt.InputMethodHints, Qt.InputMethodHint])
setInsertPolicy(self, QComboBox.InsertPolicy)
setItemData(self, int, Any, role: int = Qt.UserRole)
setItemDelegate(self, QAbstractItemDelegate)
setItemIcon(self, int, QIcon)
setItemText(self, int, str)
setLayout(self, QLayout)
setLayoutDirection(self, Qt.LayoutDirection)
setLineEdit(self, QLineEdit)
setLocale(self, QLocale)
setMask(self, QBitmap)

setMask(self, QRegion)

setMaxCount(self, int)
setMaxVisibleItems(self, int)
setMaximumHeight(self, int)
setMaximumSize(self, int, int)

setMaximumSize(self, QSize)

setMaximumWidth(self, int)
setMinimumContentsLength(self, int)
setMinimumHeight(self, int)
setMinimumSize(self, int, int)

setMinimumSize(self, QSize)

setMinimumWidth(self, int)
setModel(self, QAbstractItemModel)
setModelColumn(self, int)
setMouseTracking(self, bool)
setObjectName(self, str)
setPalette(self, QPalette)
setParent(self, QWidget)

setParent(self, QWidget, Union[Qt.WindowFlags, Qt.WindowType])

setProperty(self, str, Any) → bool
setRootModelIndex(self, QModelIndex)
setShortcutAutoRepeat(self, int, enabled: bool = True)
setShortcutEnabled(self, int, enabled: bool = True)
setSizeAdjustPolicy(self, QComboBox.SizeAdjustPolicy)
setSizeIncrement(self, int, int)

setSizeIncrement(self, QSize)

setSizePolicy(self, QSizePolicy)

setSizePolicy(self, QSizePolicy.Policy, QSizePolicy.Policy)

setStatusTip(self, str)
setStyle(self, QStyle)
setStyleSheet(self, str)
setSuggestions(suggestions)

Replace the current set of completion suggestions with the supplied values.

Parameters:suggestions – a new list of completion suggestions to set on this object
Rtype suggestions:
 list(str)
setTabOrder(QWidget, QWidget)
setTabletTracking(self, bool)
setToolTip(self, str)
setToolTipDuration(self, int)
setUpdatesEnabled(self, bool)
setValidator(self, QValidator)
setView(self, QAbstractItemView)
setVisible(self, bool)
setWhatsThis(self, str)
setWindowFilePath(self, str)
setWindowFlag(self, Qt.WindowType, on: bool = True)
setWindowFlags(self, Union[Qt.WindowFlags, Qt.WindowType])
setWindowIcon(self, QIcon)
setWindowIconText(self, str)
setWindowModality(self, Qt.WindowModality)
setWindowModified(self, bool)
setWindowOpacity(self, float)
setWindowRole(self, str)
setWindowState(self, Union[Qt.WindowStates, Qt.WindowState])
setWindowTitle(self, str)
sharedPainter(self) → QPainter
show(self)
showEvent(self, QShowEvent)
showFullScreen(self)
showMaximized(self)
showMinimized(self)
showNormal(self)
showPopup(self)
signalsBlocked(self) → bool
size(self) → QSize
sizeAdjustPolicy(self) → QComboBox.SizeAdjustPolicy
sizeHint(self) → QSize
sizeIncrement(self) → QSize
sizePolicy(self) → QSizePolicy
stackUnder(self, QWidget)
startTimer(self, int, timerType: Qt.TimerType = Qt.CoarseTimer) → int
staticMetaObject = <PyQt5.QtCore.QMetaObject object>
statusTip(self) → str
style(self) → QStyle
styleSheet(self) → str
suggestion_limit
Returns:the maximum number of completion suggestions that this object will remember; if None, there is no limit.
Return type:int or None
tabletEvent(self, QTabletEvent)
testAttribute(self, Qt.WidgetAttribute) → bool
thread(self) → QThread
timerEvent(self, QTimerEvent)
toolTip(self) → str
toolTipDuration(self) → int
tr(self, str, disambiguation: str = None, n: int = -1) → str
underMouse(self) → bool
ungrabGesture(self, Qt.GestureType)
unsetCursor(self)
unsetLayoutDirection(self)
unsetLocale(self)
update(self)

update(self, QRect) update(self, QRegion) update(self, int, int, int, int)

updateGeometry(self)
updateMicroFocus(self)
updatesEnabled(self) → bool
validator(self) → QValidator
view(self) → QAbstractItemView
visibleRegion(self) → QRegion
whatsThis(self) → str
wheelEvent(self, QWheelEvent)
width(self) → int
widthMM(self) → int
winId(self) → sip.voidptr
window(self) → QWidget
windowFilePath(self) → str
windowFlags(self) → Qt.WindowFlags
windowHandle(self) → QWindow
windowIcon(self) → QIcon
windowIconChanged

windowIconChanged(self, QIcon) [signal]

windowIconText(self) → str
windowIconTextChanged

windowIconTextChanged(self, str) [signal]

windowModality(self) → Qt.WindowModality
windowOpacity(self) → float
windowRole(self) → str
windowState(self) → Qt.WindowStates
windowTitle(self) → str
windowTitleChanged

windowTitleChanged(self, str) [signal]

windowType(self) → Qt.WindowType
x(self) → int
y(self) → int
class schrodinger.ui.qt.recent_completer.RecentCompleter

Bases: PyQt5.QtWidgets.QCompleter, schrodinger.ui.qt.recent_completer.StringListModelInterface

A QLineEdit completer that can remember a limited number of completion suggestions, and optionally retain completion suggestions persistently.

CaseInsensitivelySortedModel = 2
CaseSensitivelySortedModel = 1
class CompletionMode

Bases: int

__init__

Initialize self. See help(type(self)) for accurate signature.

bit_length() → int

Number of bits necessary to represent self in binary. >>> bin(37) ‘0b100101’ >>> (37).bit_length() 6

conjugate()

Returns self, the complex conjugate of any int.

denominator

the denominator of a rational number in lowest terms

from_bytes(bytes, byteorder, *, signed=False) → int

Return the integer represented by the given array of bytes.

The bytes argument must be a bytes-like object (e.g. bytes or bytearray).

The byteorder argument determines the byte order used to represent the integer. If byteorder is ‘big’, the most significant byte is at the beginning of the byte array. If byteorder is ‘little’, the most significant byte is at the end of the byte array. To request the native byte order of the host system, use `sys.byteorder’ as the byte order value.

The signed keyword-only argument indicates whether two’s complement is used to represent the integer.

imag

the imaginary part of a complex number

numerator

the numerator of a rational number in lowest terms

real

the real part of a complex number

to_bytes(length, byteorder, *, signed=False) → bytes

Return an array of bytes representing an integer.

The integer is represented using length bytes. An OverflowError is raised if the integer is not representable with the given number of bytes.

The byteorder argument determines the byte order used to represent the integer. If byteorder is ‘big’, the most significant byte is at the beginning of the byte array. If byteorder is ‘little’, the most significant byte is at the end of the byte array. To request the native byte order of the host system, use `sys.byteorder’ as the byte order value.

The signed keyword-only argument determines whether two’s complement is used to represent the integer. If signed is False and a negative integer is given, an OverflowError is raised.

InlineCompletion = 2
class ModelSorting

Bases: int

__init__

Initialize self. See help(type(self)) for accurate signature.

bit_length() → int

Number of bits necessary to represent self in binary. >>> bin(37) ‘0b100101’ >>> (37).bit_length() 6

conjugate()

Returns self, the complex conjugate of any int.

denominator

the denominator of a rational number in lowest terms

from_bytes(bytes, byteorder, *, signed=False) → int

Return the integer represented by the given array of bytes.

The bytes argument must be a bytes-like object (e.g. bytes or bytearray).

The byteorder argument determines the byte order used to represent the integer. If byteorder is ‘big’, the most significant byte is at the beginning of the byte array. If byteorder is ‘little’, the most significant byte is at the end of the byte array. To request the native byte order of the host system, use `sys.byteorder’ as the byte order value.

The signed keyword-only argument indicates whether two’s complement is used to represent the integer.

imag

the imaginary part of a complex number

numerator

the numerator of a rational number in lowest terms

real

the real part of a complex number

to_bytes(length, byteorder, *, signed=False) → bytes

Return an array of bytes representing an integer.

The integer is represented using length bytes. An OverflowError is raised if the integer is not representable with the given number of bytes.

The byteorder argument determines the byte order used to represent the integer. If byteorder is ‘big’, the most significant byte is at the beginning of the byte array. If byteorder is ‘little’, the most significant byte is at the end of the byte array. To request the native byte order of the host system, use `sys.byteorder’ as the byte order value.

The signed keyword-only argument determines whether two’s complement is used to represent the integer. If signed is False and a negative integer is given, an OverflowError is raised.

PopupCompletion = 0
UnfilteredPopupCompletion = 1
UnsortedModel = 0
__init__

Initialize self. See help(type(self)) for accurate signature.

activated

activated(self, str) [signal] activated(self, QModelIndex) [signal]

addSuggestion(new_suggestion)

Add a new completion suggestion to this object. If it already exists in this object, put it to the top of the list to indicate that it the most recent suggestion.

Parameters:new_suggestion (str) – a new completion suggestion
blockSignals(self, bool) → bool
caseSensitivity(self) → Qt.CaseSensitivity
childEvent(self, QChildEvent)
children(self) → object
complete(self, rect: QRect = QRect())
completionColumn(self) → int
completionCount(self) → int
completionMode(self) → QCompleter.CompletionMode
completionModel(self) → QAbstractItemModel
completionPrefix(self) → str
completionRole(self) → int
connectNotify(self, QMetaMethod)
currentCompletion(self) → str
currentIndex(self) → QModelIndex
currentRow(self) → int
customEvent(self, QEvent)
deleteLater(self)
destroyed

destroyed(self, QObject = None) [signal]

disconnect(self)
disconnectNotify(self, QMetaMethod)
dumpObjectInfo(self)
dumpObjectTree(self)
dynamicPropertyNames(self) → object
event(self, QEvent) → bool
eventFilter(self, QObject, QEvent) → bool
filterMode(self) → Qt.MatchFlags
findChild(self, type, name: str = '', options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) → QObject

findChild(self, Tuple, name: str = ‘’, options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) -> QObject

findChildren(self, type, name: str = '', options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, Tuple, name: str = ‘’, options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) -> List[QObject] findChildren(self, type, QRegExp, options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) -> List[QObject] findChildren(self, Tuple, QRegExp, options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) -> List[QObject] findChildren(self, type, QRegularExpression, options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) -> List[QObject] findChildren(self, Tuple, QRegularExpression, options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) -> List[QObject]

highlighted

highlighted(self, str) [signal] highlighted(self, QModelIndex) [signal]

inherits(self, str) → bool
installEventFilter(self, QObject)
isSignalConnected(self, QMetaMethod) → bool
isWidgetType(self) → bool
isWindowType(self) → bool
killTimer(self, int)
maxVisibleItems(self) → int
metaObject(self) → QMetaObject
model(self) → QAbstractItemModel
modelSorting(self) → QCompleter.ModelSorting
moveToThread(self, QThread)
objectName(self) → str
objectNameChanged

objectNameChanged(self, str) [signal]

parent(self) → QObject
pathFromIndex(self, QModelIndex) → str
popup(self) → QAbstractItemView
property(self, str) → Any
pyqtConfigure(...)

Each keyword argument is either the name of a Qt property or a Qt signal. For properties the property is set to the given value which should be of an appropriate type. For signals the signal is connected to the given value which should be a callable.

receivers(self, PYQT_SIGNAL) → int
removeEventFilter(self, QObject)
sender(self) → QObject
senderSignalIndex(self) → int
setCaseSensitivity(self, Qt.CaseSensitivity)
setCompletionColumn(self, int)
setCompletionMode(self, QCompleter.CompletionMode)
setCompletionPrefix(self, str)
setCompletionRole(self, int)
setCurrentRow(self, int) → bool
setFilterMode(self, Union[Qt.MatchFlags, Qt.MatchFlag])
setMaxVisibleItems(self, int)
setModel(self, QAbstractItemModel)
setModelSorting(self, QCompleter.ModelSorting)
setObjectName(self, str)
setParent(self, QObject)
setPopup(self, QAbstractItemView)
setProperty(self, str, Any) → bool
setSuggestions(suggestions)

Replace the current set of completion suggestions with the supplied values.

Parameters:suggestions – a new list of completion suggestions to set on this object
Rtype suggestions:
 list(str)
setWidget(self, QWidget)
setWrapAround(self, bool)
signalsBlocked(self) → bool
splitPath(self, str) → List[str]
startTimer(self, int, timerType: Qt.TimerType = Qt.CoarseTimer) → int
staticMetaObject = <PyQt5.QtCore.QMetaObject object>
suggestion_limit
Returns:the maximum number of completion suggestions that this object will remember; if None, there is no limit.
Return type:int or None
thread(self) → QThread
timerEvent(self, QTimerEvent)
tr(self, str, disambiguation: str = None, n: int = -1) → str
widget(self) → QWidget
wrapAround(self) → bool
class schrodinger.ui.qt.recent_completer.PlaceholderRecentCombo(parent=None, placeholder='Please select an option...', **kwargs)

Bases: schrodinger.ui.qt.swidgets.PlaceholderComboMixin, schrodinger.ui.qt.recent_completer.RecentCombo

A RecentCombo which enables persistent options as well as placeholder text

AdjustToContents = 0
AdjustToContentsOnFirstShow = 1
AdjustToMinimumContentsLength = 2
AdjustToMinimumContentsLengthWithIcon = 3
DrawChildren = 2
DrawWindowBackground = 1
IgnoreMask = 4
InsertAfterCurrent = 4
InsertAlphabetically = 6
InsertAtBottom = 3
InsertAtCurrent = 2
InsertAtTop = 1
InsertBeforeCurrent = 5
class InsertPolicy

Bases: int

__init__

Initialize self. See help(type(self)) for accurate signature.

bit_length() → int

Number of bits necessary to represent self in binary. >>> bin(37) ‘0b100101’ >>> (37).bit_length() 6

conjugate()

Returns self, the complex conjugate of any int.

denominator

the denominator of a rational number in lowest terms

from_bytes(bytes, byteorder, *, signed=False) → int

Return the integer represented by the given array of bytes.

The bytes argument must be a bytes-like object (e.g. bytes or bytearray).

The byteorder argument determines the byte order used to represent the integer. If byteorder is ‘big’, the most significant byte is at the beginning of the byte array. If byteorder is ‘little’, the most significant byte is at the end of the byte array. To request the native byte order of the host system, use `sys.byteorder’ as the byte order value.

The signed keyword-only argument indicates whether two’s complement is used to represent the integer.

imag

the imaginary part of a complex number

numerator

the numerator of a rational number in lowest terms

real

the real part of a complex number

to_bytes(length, byteorder, *, signed=False) → bytes

Return an array of bytes representing an integer.

The integer is represented using length bytes. An OverflowError is raised if the integer is not representable with the given number of bytes.

The byteorder argument determines the byte order used to represent the integer. If byteorder is ‘big’, the most significant byte is at the beginning of the byte array. If byteorder is ‘little’, the most significant byte is at the end of the byte array. To request the native byte order of the host system, use `sys.byteorder’ as the byte order value.

The signed keyword-only argument determines whether two’s complement is used to represent the integer. If signed is False and a negative integer is given, an OverflowError is raised.

NoInsert = 0
class PaintDeviceMetric

Bases: int

__init__

Initialize self. See help(type(self)) for accurate signature.

bit_length() → int

Number of bits necessary to represent self in binary. >>> bin(37) ‘0b100101’ >>> (37).bit_length() 6

conjugate()

Returns self, the complex conjugate of any int.

denominator

the denominator of a rational number in lowest terms

from_bytes(bytes, byteorder, *, signed=False) → int

Return the integer represented by the given array of bytes.

The bytes argument must be a bytes-like object (e.g. bytes or bytearray).

The byteorder argument determines the byte order used to represent the integer. If byteorder is ‘big’, the most significant byte is at the beginning of the byte array. If byteorder is ‘little’, the most significant byte is at the end of the byte array. To request the native byte order of the host system, use `sys.byteorder’ as the byte order value.

The signed keyword-only argument indicates whether two’s complement is used to represent the integer.

imag

the imaginary part of a complex number

numerator

the numerator of a rational number in lowest terms

real

the real part of a complex number

to_bytes(length, byteorder, *, signed=False) → bytes

Return an array of bytes representing an integer.

The integer is represented using length bytes. An OverflowError is raised if the integer is not representable with the given number of bytes.

The byteorder argument determines the byte order used to represent the integer. If byteorder is ‘big’, the most significant byte is at the beginning of the byte array. If byteorder is ‘little’, the most significant byte is at the end of the byte array. To request the native byte order of the host system, use `sys.byteorder’ as the byte order value.

The signed keyword-only argument determines whether two’s complement is used to represent the integer. If signed is False and a negative integer is given, an OverflowError is raised.

PdmDepth = 6
PdmDevicePixelRatio = 11
PdmDevicePixelRatioScaled = 12
PdmDpiX = 7
PdmDpiY = 8
PdmHeight = 2
PdmHeightMM = 4
PdmNumColors = 5
PdmPhysicalDpiX = 9
PdmPhysicalDpiY = 10
PdmWidth = 1
PdmWidthMM = 3
class RenderFlag

Bases: int

__init__

Initialize self. See help(type(self)) for accurate signature.

bit_length() → int

Number of bits necessary to represent self in binary. >>> bin(37) ‘0b100101’ >>> (37).bit_length() 6

conjugate()

Returns self, the complex conjugate of any int.

denominator

the denominator of a rational number in lowest terms

from_bytes(bytes, byteorder, *, signed=False) → int

Return the integer represented by the given array of bytes.

The bytes argument must be a bytes-like object (e.g. bytes or bytearray).

The byteorder argument determines the byte order used to represent the integer. If byteorder is ‘big’, the most significant byte is at the beginning of the byte array. If byteorder is ‘little’, the most significant byte is at the end of the byte array. To request the native byte order of the host system, use `sys.byteorder’ as the byte order value.

The signed keyword-only argument indicates whether two’s complement is used to represent the integer.

imag

the imaginary part of a complex number

numerator

the numerator of a rational number in lowest terms

real

the real part of a complex number

to_bytes(length, byteorder, *, signed=False) → bytes

Return an array of bytes representing an integer.

The integer is represented using length bytes. An OverflowError is raised if the integer is not representable with the given number of bytes.

The byteorder argument determines the byte order used to represent the integer. If byteorder is ‘big’, the most significant byte is at the beginning of the byte array. If byteorder is ‘little’, the most significant byte is at the end of the byte array. To request the native byte order of the host system, use `sys.byteorder’ as the byte order value.

The signed keyword-only argument determines whether two’s complement is used to represent the integer. If signed is False and a negative integer is given, an OverflowError is raised.

class RenderFlags

Bases: sip.simplewrapper

QWidget.RenderFlags(Union[QWidget.RenderFlags, QWidget.RenderFlag]) QWidget.RenderFlags(QWidget.RenderFlags)

__init__

Initialize self. See help(type(self)) for accurate signature.

class SizeAdjustPolicy

Bases: int

__init__

Initialize self. See help(type(self)) for accurate signature.

bit_length() → int

Number of bits necessary to represent self in binary. >>> bin(37) ‘0b100101’ >>> (37).bit_length() 6

conjugate()

Returns self, the complex conjugate of any int.

denominator

the denominator of a rational number in lowest terms

from_bytes(bytes, byteorder, *, signed=False) → int

Return the integer represented by the given array of bytes.

The bytes argument must be a bytes-like object (e.g. bytes or bytearray).

The byteorder argument determines the byte order used to represent the integer. If byteorder is ‘big’, the most significant byte is at the beginning of the byte array. If byteorder is ‘little’, the most significant byte is at the end of the byte array. To request the native byte order of the host system, use `sys.byteorder’ as the byte order value.

The signed keyword-only argument indicates whether two’s complement is used to represent the integer.

imag

the imaginary part of a complex number

numerator

the numerator of a rational number in lowest terms

real

the real part of a complex number

to_bytes(length, byteorder, *, signed=False) → bytes

Return an array of bytes representing an integer.

The integer is represented using length bytes. An OverflowError is raised if the integer is not representable with the given number of bytes.

The byteorder argument determines the byte order used to represent the integer. If byteorder is ‘big’, the most significant byte is at the beginning of the byte array. If byteorder is ‘little’, the most significant byte is at the end of the byte array. To request the native byte order of the host system, use `sys.byteorder’ as the byte order value.

The signed keyword-only argument determines whether two’s complement is used to represent the integer. If signed is False and a negative integer is given, an OverflowError is raised.

__init__(parent=None, placeholder='Please select an option...', **kwargs)

Initialize self. See help(type(self)) for accurate signature.

__len__

Return len(self).

acceptDrops(self) → bool
accessibleDescription(self) → str
accessibleName(self) → str
actionEvent(self, QActionEvent)
actions(self) → List[QAction]
activateWindow(self)
activated

activated(self, int) [signal] activated(self, str) [signal]

addAction(self, QAction)
addActions(self, object)
addItem(self, str, userData: Any = None)

addItem(self, QIcon, str, userData: Any = None)

addItems(self, Iterable[str])
addSuggestion(new_suggestion)

Add a new completion suggestion to this object. If it already exists in this object, put it to the top of the list to indicate that it the most recent suggestion.

Parameters:new_suggestion (str) – a new completion suggestion
adjustSize(self)
autoFillBackground(self) → bool
backgroundRole(self) → QPalette.ColorRole
baseSize(self) → QSize
blockSignals(self, bool) → bool
changeEvent(self, QEvent)
childAt(self, QPoint) → QWidget

childAt(self, int, int) -> QWidget

childEvent(self, QChildEvent)
children(self) → object
childrenRect(self) → QRect
childrenRegion(self) → QRegion
clear(self)
clearEditText(self)
clearFocus(self)
clearMask(self)
close(self) → bool
closeEvent(self, QCloseEvent)
colorCount(self) → int
completer(self) → QCompleter
connectNotify(self, QMetaMethod)
contentsMargins(self) → QMargins
contentsRect(self) → QRect
contextMenuEvent(self, QContextMenuEvent)
contextMenuPolicy(self) → Qt.ContextMenuPolicy
count(self) → int
create(self, window: sip.voidptr = 0, initializeWindow: bool = True, destroyOldWindow: bool = True)
createWindowContainer(QWindow, parent: QWidget = None, flags: Union[Qt.WindowFlags, Qt.WindowType] = 0) → QWidget
currentData(self, role: int = Qt.UserRole) → Any
currentIndex(self) → int
currentIndexChanged

currentIndexChanged(self, int) [signal] currentIndexChanged(self, str) [signal]

currentText(self) → str
currentTextChanged

currentTextChanged(self, str) [signal]

cursor(self) → QCursor
customContextMenuRequested

customContextMenuRequested(self, QPoint) [signal]

customEvent(self, QEvent)
deleteLater(self)
depth(self) → int
destroy(self, destroyWindow: bool = True, destroySubWindows: bool = True)
destroyed

destroyed(self, QObject = None) [signal]

devType(self) → int
devicePixelRatio(self) → int
devicePixelRatioF(self) → float
devicePixelRatioFScale() → float
disconnect(self)
disconnectNotify(self, QMetaMethod)
dragEnterEvent(self, QDragEnterEvent)
dragLeaveEvent(self, QDragLeaveEvent)
dragMoveEvent(self, QDragMoveEvent)
dropEvent(self, QDropEvent)
dumpObjectInfo(self)
dumpObjectTree(self)
duplicatesEnabled(self) → bool
dynamicPropertyNames(self) → object
editTextChanged

editTextChanged(self, str) [signal]

effectiveWinId(self) → sip.voidptr
ensurePolished(self)
enterEvent(self, QEvent)
event(self, QEvent) → bool
eventFilter(self, QObject, QEvent) → bool
find(sip.voidptr) → QWidget
findChild(self, type, name: str = '', options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) → QObject

findChild(self, Tuple, name: str = ‘’, options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) -> QObject

findChildren(self, type, name: str = '', options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, Tuple, name: str = ‘’, options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) -> List[QObject] findChildren(self, type, QRegExp, options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) -> List[QObject] findChildren(self, Tuple, QRegExp, options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) -> List[QObject] findChildren(self, type, QRegularExpression, options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) -> List[QObject] findChildren(self, Tuple, QRegularExpression, options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) -> List[QObject]

findData(self, Any, role: int = Qt.UserRole, flags: Union[Qt.MatchFlags, Qt.MatchFlag] = Qt.MatchExactly|Qt.MatchCaseSensitive) → int
findText(self, str, flags: Union[Qt.MatchFlags, Qt.MatchFlag] = Qt.MatchExactly|Qt.MatchCaseSensitive) → int
focusInEvent(self, QFocusEvent)
focusNextChild(self) → bool
focusNextPrevChild(self, bool) → bool
focusOutEvent(self, QFocusEvent)
focusPolicy(self) → Qt.FocusPolicy
focusPreviousChild(self) → bool
focusProxy(self) → QWidget
focusWidget(self) → QWidget
font(self) → QFont
fontInfo(self) → QFontInfo
fontMetrics(self) → QFontMetrics
foregroundRole(self) → QPalette.ColorRole
frameGeometry(self) → QRect
frameSize(self) → QSize
geometry(self) → QRect
getContentsMargins(self) → Tuple[int, int, int, int]
grab(self, rectangle: QRect = QRect(QPoint(0, 0), QSize(-1, -1))) → QPixmap
grabGesture(self, Qt.GestureType, flags: Union[Qt.GestureFlags, Qt.GestureFlag] = Qt.GestureFlags())
grabKeyboard(self)
grabMouse(self)

grabMouse(self, Union[QCursor, Qt.CursorShape])

grabShortcut(self, Union[QKeySequence, QKeySequence.StandardKey, str, int], context: Qt.ShortcutContext = Qt.WindowShortcut) → int
graphicsEffect(self) → QGraphicsEffect
graphicsProxyWidget(self) → QGraphicsProxyWidget
hasFocus(self) → bool
hasFrame(self) → bool
hasHeightForWidth(self) → bool
hasMouseTracking(self) → bool
hasTabletTracking(self) → bool
height(self) → int
heightForWidth(self, int) → int
heightMM(self) → int
hide(self)
hideEvent(self, QHideEvent)
hidePopup(self)
highlighted

highlighted(self, int) [signal] highlighted(self, str) [signal]

iconSize(self) → QSize
inherits(self, str) → bool
initPainter(self, QPainter)
initStyleOption(self, QStyleOptionComboBox)
inputMethodEvent(self, QInputMethodEvent)
inputMethodHints(self) → Qt.InputMethodHints
inputMethodQuery(self, Qt.InputMethodQuery) → Any

inputMethodQuery(self, Qt.InputMethodQuery, Any) -> Any

insertAction(self, QAction, QAction)
insertActions(self, QAction, Iterable[QAction])
insertItem(self, int, str, userData: Any = None)

insertItem(self, int, QIcon, str, userData: Any = None)

insertItems(self, int, Iterable[str])
insertPolicy(self) → QComboBox.InsertPolicy
insertSeparator(self, int)
installEventFilter(self, QObject)
isActiveWindow(self) → bool
isAncestorOf(self, QWidget) → bool
isEditable(self) → bool
isEnabled(self) → bool
isEnabledTo(self, QWidget) → bool
isFullScreen(self) → bool
isHidden(self) → bool
isLeftToRight(self) → bool
isMaximized(self) → bool
isMinimized(self) → bool
isModal(self) → bool
isRightToLeft(self) → bool
isSignalConnected(self, QMetaMethod) → bool
isVisible(self) → bool
isVisibleTo(self, QWidget) → bool
isWidgetType(self) → bool
isWindow(self) → bool
isWindowModified(self) → bool
isWindowType(self) → bool
itemData(self, int, role: int = Qt.UserRole) → Any
itemDelegate(self) → QAbstractItemDelegate
itemIcon(self, int) → QIcon
itemText(self, int) → str
keyPressEvent(self, QKeyEvent)
keyReleaseEvent(self, QKeyEvent)
keyboardGrabber() → QWidget
killTimer(self, int)
layout(self) → QLayout
layoutDirection(self) → Qt.LayoutDirection
leaveEvent(self, QEvent)
lineEdit(self) → QLineEdit
locale(self) → QLocale
logicalDpiX(self) → int
logicalDpiY(self) → int
lower(self)
mapFrom(self, QWidget, QPoint) → QPoint
mapFromGlobal(self, QPoint) → QPoint
mapFromParent(self, QPoint) → QPoint
mapTo(self, QWidget, QPoint) → QPoint
mapToGlobal(self, QPoint) → QPoint
mapToParent(self, QPoint) → QPoint
mask(self) → QRegion
maxCount(self) → int
maxVisibleItems(self) → int
maximumHeight(self) → int
maximumSize(self) → QSize
maximumWidth(self) → int
metaObject(self) → QMetaObject
metric(self, QPaintDevice.PaintDeviceMetric) → int
minimumContentsLength(self) → int
minimumHeight(self) → int
minimumSize(self) → QSize
minimumSizeHint(self) → QSize
minimumWidth(self) → int
model(self) → QAbstractItemModel
modelColumn(self) → int
mouseDoubleClickEvent(self, QMouseEvent)
mouseGrabber() → QWidget
mouseMoveEvent(self, QMouseEvent)
mousePressEvent(self, QMouseEvent)
mouseReleaseEvent(self, QMouseEvent)
move(self, QPoint)

move(self, int, int)

moveEvent(self, QMoveEvent)
moveToThread(self, QThread)
nativeEvent(self, Union[QByteArray, bytes, bytearray], sip.voidptr) → Tuple[bool, int]
nativeParentWidget(self) → QWidget
nextInFocusChain(self) → QWidget
normalGeometry(self) → QRect
objectName(self) → str
objectNameChanged

objectNameChanged(self, str) [signal]

overrideWindowFlags(self, Union[Qt.WindowFlags, Qt.WindowType])
overrideWindowState(self, Union[Qt.WindowStates, Qt.WindowState])
paintEngine(self) → QPaintEngine
paintEvent(event)

This reimplements QComboBox.paintEvent based on the C++ implementation.

It uses italic font to paint _placeholder_text when the index is -1

paintingActive(self) → bool
palette(self) → QPalette
parent(self) → QObject
parentWidget(self) → QWidget
physicalDpiX(self) → int
physicalDpiY(self) → int
pos(self) → QPoint
previousInFocusChain(self) → QWidget
property(self, str) → Any
pyqtConfigure(...)

Each keyword argument is either the name of a Qt property or a Qt signal. For properties the property is set to the given value which should be of an appropriate type. For signals the signal is connected to the given value which should be a callable.

raise_(self)
receivers(self, PYQT_SIGNAL) → int
rect(self) → QRect
releaseKeyboard(self)
releaseMouse(self)
releaseShortcut(self, int)
removeAction(self, QAction)
removeEventFilter(self, QObject)
removeItem(self, int)
render(self, QPaintDevice, targetOffset: QPoint = QPoint(), sourceRegion: QRegion = QRegion(), flags: Union[QWidget.RenderFlags, QWidget.RenderFlag] = QWidget.RenderFlags(QWidget.DrawWindowBackground|QWidget.DrawChildren))

render(self, QPainter, targetOffset: QPoint = QPoint(), sourceRegion: QRegion = QRegion(), flags: Union[QWidget.RenderFlags, QWidget.RenderFlag] = QWidget.RenderFlags(QWidget.DrawWindowBackground|QWidget.DrawChildren))

repaint(self)

repaint(self, int, int, int, int) repaint(self, QRect) repaint(self, QRegion)

resize(self, QSize)

resize(self, int, int)

resizeEvent(self, QResizeEvent)
restoreGeometry(self, Union[QByteArray, bytes, bytearray]) → bool
rootModelIndex(self) → QModelIndex
saveGeometry(self) → QByteArray
scroll(self, int, int)

scroll(self, int, int, QRect)

sender(self) → QObject
senderSignalIndex(self) → int
setAcceptDrops(self, bool)
setAccessibleDescription(self, str)
setAccessibleName(self, str)
setAttribute(self, Qt.WidgetAttribute, on: bool = True)
setAutoFillBackground(self, bool)
setBackgroundRole(self, QPalette.ColorRole)
setBaseSize(self, int, int)

setBaseSize(self, QSize)

setCompleter(self, QCompleter)
setContentsMargins(self, int, int, int, int)

setContentsMargins(self, QMargins)

setContextMenuPolicy(self, Qt.ContextMenuPolicy)
setCurrentIndex(self, int)
setCurrentText(self, str)
setCursor(self, Union[QCursor, Qt.CursorShape])
setDisabled(self, bool)
setDuplicatesEnabled(self, bool)
setEditText(self, str)
setEditable(self, bool)
setEnabled(self, bool)
setFixedHeight(self, int)
setFixedSize(self, QSize)

setFixedSize(self, int, int)

setFixedWidth(self, int)
setFocus(self)

setFocus(self, Qt.FocusReason)

setFocusPolicy(self, Qt.FocusPolicy)
setFocusProxy(self, QWidget)
setFont(self, QFont)
setForegroundRole(self, QPalette.ColorRole)
setFrame(self, bool)
setGeometry(self, QRect)

setGeometry(self, int, int, int, int)

setGraphicsEffect(self, QGraphicsEffect)
setHidden(self, bool)
setIconSize(self, QSize)
setInputMethodHints(self, Union[Qt.InputMethodHints, Qt.InputMethodHint])
setInsertPolicy(self, QComboBox.InsertPolicy)
setItemData(self, int, Any, role: int = Qt.UserRole)
setItemDelegate(self, QAbstractItemDelegate)
setItemIcon(self, int, QIcon)
setItemText(self, int, str)
setLayout(self, QLayout)
setLayoutDirection(self, Qt.LayoutDirection)
setLineEdit(self, QLineEdit)
setLocale(self, QLocale)
setMask(self, QBitmap)

setMask(self, QRegion)

setMaxCount(self, int)
setMaxVisibleItems(self, int)
setMaximumHeight(self, int)
setMaximumSize(self, int, int)

setMaximumSize(self, QSize)

setMaximumWidth(self, int)
setMinimumContentsLength(self, int)
setMinimumHeight(self, int)
setMinimumSize(self, int, int)

setMinimumSize(self, QSize)

setMinimumWidth(self, int)
setModel(self, QAbstractItemModel)
setModelColumn(self, int)
setMouseTracking(self, bool)
setObjectName(self, str)
setPalette(self, QPalette)
setParent(self, QWidget)

setParent(self, QWidget, Union[Qt.WindowFlags, Qt.WindowType])

setProperty(self, str, Any) → bool
setRootModelIndex(self, QModelIndex)
setShortcutAutoRepeat(self, int, enabled: bool = True)
setShortcutEnabled(self, int, enabled: bool = True)
setSizeAdjustPolicy(self, QComboBox.SizeAdjustPolicy)
setSizeIncrement(self, int, int)

setSizeIncrement(self, QSize)

setSizePolicy(self, QSizePolicy)

setSizePolicy(self, QSizePolicy.Policy, QSizePolicy.Policy)

setStatusTip(self, str)
setStyle(self, QStyle)
setStyleSheet(self, str)
setSuggestions(suggestions)

Replace the current set of completion suggestions with the supplied values.

Parameters:suggestions – a new list of completion suggestions to set on this object
Rtype suggestions:
 list(str)
setTabOrder(QWidget, QWidget)
setTabletTracking(self, bool)
setToolTip(self, str)
setToolTipDuration(self, int)
setUpdatesEnabled(self, bool)
setValidator(self, QValidator)
setView(self, QAbstractItemView)
setVisible(self, bool)
setWhatsThis(self, str)
setWindowFilePath(self, str)
setWindowFlag(self, Qt.WindowType, on: bool = True)
setWindowFlags(self, Union[Qt.WindowFlags, Qt.WindowType])
setWindowIcon(self, QIcon)
setWindowIconText(self, str)
setWindowModality(self, Qt.WindowModality)
setWindowModified(self, bool)
setWindowOpacity(self, float)
setWindowRole(self, str)
setWindowState(self, Union[Qt.WindowStates, Qt.WindowState])
setWindowTitle(self, str)
sharedPainter(self) → QPainter
show(self)
showEvent(self, QShowEvent)
showFullScreen(self)
showMaximized(self)
showMinimized(self)
showNormal(self)
showPopup(self)
signalsBlocked(self) → bool
size(self) → QSize
sizeAdjustPolicy(self) → QComboBox.SizeAdjustPolicy
sizeHint(self) → QSize
sizeIncrement(self) → QSize
sizePolicy(self) → QSizePolicy
stackUnder(self, QWidget)
startTimer(self, int, timerType: Qt.TimerType = Qt.CoarseTimer) → int
staticMetaObject = <PyQt5.QtCore.QMetaObject object>
statusTip(self) → str
style(self) → QStyle
styleSheet(self) → str
suggestion_limit
Returns:the maximum number of completion suggestions that this object will remember; if None, there is no limit.
Return type:int or None
tabletEvent(self, QTabletEvent)
testAttribute(self, Qt.WidgetAttribute) → bool
thread(self) → QThread
timerEvent(self, QTimerEvent)
toolTip(self) → str
toolTipDuration(self) → int
tr(self, str, disambiguation: str = None, n: int = -1) → str
underMouse(self) → bool
ungrabGesture(self, Qt.GestureType)
unsetCursor(self)
unsetLayoutDirection(self)
unsetLocale(self)
update(self)

update(self, QRect) update(self, QRegion) update(self, int, int, int, int)

updateGeometry(self)
updateMicroFocus(self)
updatesEnabled(self) → bool
validator(self) → QValidator
view(self) → QAbstractItemView
visibleRegion(self) → QRegion
whatsThis(self) → str
wheelEvent(self, QWheelEvent)
width(self) → int
widthMM(self) → int
winId(self) → sip.voidptr
window(self) → QWidget
windowFilePath(self) → str
windowFlags(self) → Qt.WindowFlags
windowHandle(self) → QWindow
windowIcon(self) → QIcon
windowIconChanged

windowIconChanged(self, QIcon) [signal]

windowIconText(self) → str
windowIconTextChanged

windowIconTextChanged(self, str) [signal]

windowModality(self) → Qt.WindowModality
windowOpacity(self) → float
windowRole(self) → str
windowState(self) → Qt.WindowStates
windowTitle(self) → str
windowTitleChanged

windowTitleChanged(self, str) [signal]

windowType(self) → Qt.WindowType
x(self) → int
y(self) → int