schrodinger.application.jaguar.gui.tabs.input_tab module¶
-
class
schrodinger.application.jaguar.gui.tabs.input_tab.
InputTabBase
(parent, input_selector=None)¶ Bases:
schrodinger.application.jaguar.gui.tabs.base_tab.ProvidesStructuresMixin
,schrodinger.application.jaguar.gui.tabs.base_tab.BaseTab
A tab for specifying settings for the structures currently selected in the project table. Note that this class is not intended to be directly instantiated. Instead, the InputTab or InputTabPka classes should be used.
Variables: - MODEL_CLASS (
schrodinger.application.jaguar.gui.input_tab_widgets. SelectedEntriesModel
) – The class to use for the table model - PROXY_CLASS (
schrodinger.application.jaguar.gui.input_tab_widgets. SelectedEntriesProxyModel
) – The class to use for the table proxy model - VIEW_CLASS (
schrodinger.application.jaguar.gui.input_tab_widgets. SelectedEntriesView
) – The class to use for the table view - strucSourceChanged (
QtCore.pyqtSignal
) – A signal emitted when the structure source changes from included to selected or vice versa.
-
strucSourceChanged
¶
-
NAME
= 'Input'¶
-
MODEL_CLASS
¶ alias of
schrodinger.application.jaguar.gui.input_tab_widgets.InputEntriesModel
-
PROXY_CLASS
¶ alias of
schrodinger.application.jaguar.gui.input_tab_widgets.InputEntriesProxyModel
-
VIEW_CLASS
¶ alias of
schrodinger.application.jaguar.gui.input_tab_widgets.InputEntriesView
-
setup
()¶ Perform tab specific initialization. This function should be defined in subclasses if initialization is needed.
-
projectUpdated
()¶ When the project is updated, update the selected entries table
-
workspaceChanged
(what_changed)¶ Update the table whenever the workspace changes in case the user changed the charge of a molecule.
Parameters: what_changed (str) – A flag indicating what changed in the workspace
-
loadSettings
(jag_input)¶ Restore tab settings from mmjag keywords. This function should be defined in subclasses.
Parameters: jag_input (schrodinger.application.jaguar.input.JaguarInput) – The Jaguar settings to base the tab settings on
-
validate
()¶ Make sure that the tab settings will allow a job to be run successfully. Note that this validation should not be redundant with that performed in
getMmJagKeywords
. Any tab setting that prevents valid mmjag keywords from being generated should causegetMmJagKeywords
to raise a JaguarSettingError. Any tab setting that allows mmjag keywords to be successfully generated but will result in a job failure should cause avalidate
fail. This function should be defined in subclasses if validation is needed.Returns: If the validation passes, None is returned. If the validation fails, a string that describes the error is returned. Return type: str or NoneType
-
getStructures
()¶ Get all structures loaded into the tab and their associated Jaguar settings
Returns: A list of tuples. Each tuple represents a single structure and contains: - Entry ID of the structure
- A
schrodinger.structure.Structure
object containing the structure itself - A dictionary of keywords specific to the structure
Return type: list
-
getNumStructures
()¶
-
getStructureTitleForJobname
()¶ Get the structure title to be used in the job name. If the tab includes multiple structures, then
MULTIPLE_STRUC_JOB_TITLE
should be returned. If no structures have been specified yet, then None should be returned.Returns: The structure title Return type: str or NoneType
-
reset
()¶ Reset any structure specific settings in the table. (The non-struture specific settings will be reset via loadSettings())
-
useFromComboChanged
()¶ Respond to the user changing the structure source (from included to selected or vice versa).
-
usingSelected
()¶ Return True if the tab is set to use selected entries. False if the tab is set to use included entries.
-
DrawChildren
= 2¶
-
DrawWindowBackground
= 1¶
-
HELP_TOPIC
= ''¶
-
IgnoreMask
= 4¶
-
MULTIPLE_STRUC_JOB_TITLE
= 'batch'¶
-
class
PaintDeviceMetric
¶ Bases:
int
-
__init__
= <method-wrapper '__init__' of sip.enumtype object at 0x2e86380>¶
-
-
PdmDepth
= 6¶
-
PdmDevicePixelRatio
= 11¶
-
PdmDevicePixelRatioScaled
= 12¶
-
PdmDpiX
= 7¶
-
PdmDpiY
= 8¶
-
PdmHeight
= 2¶
-
PdmHeightMM
= 4¶
-
PdmNumColors
= 5¶
-
PdmPhysicalDpiX
= 9¶
-
PdmPhysicalDpiY
= 10¶
-
PdmWidth
= 1¶
-
PdmWidthMM
= 3¶
-
class
RenderFlag
¶ Bases:
int
-
__init__
= <method-wrapper '__init__' of sip.enumtype object at 0x30eb450>¶
-
-
class
RenderFlags
¶ Bases:
sip.simplewrapper
QWidget.RenderFlags(Union[QWidget.RenderFlags, QWidget.RenderFlag]) QWidget.RenderFlags(QWidget.RenderFlags)
-
__init__
¶ Initialize self. See help(type(self)) for accurate signature.
-
-
UI_MODULES
= None¶
-
__init__
(parent, input_selector=None)¶ Perform common tab initialization. All tab specific initialization should go in setup().
Parameters: - parent (PyQt5.QtWidgets.QWidget) – The Qt parent widget
- input_selector (schrodinger.ui.qt.input_selector.InputSelector) – The panel’s input selector widget, if available.
-
acceptDrops
(self) → bool¶
-
accessibleDescription
(self) → str¶
-
accessibleName
(self) → str¶
-
actionEvent
(self, QActionEvent)¶
-
actions
(self) → List[QAction]¶
-
activate
()¶ This function will be called whenever the user selects this tab. Subclasses can override it if necessary to, e.g., activate picking.
-
activateWindow
(self)¶
-
addAction
(self, QAction)¶
-
addActions
(self, Iterable[QAction])¶
-
adjustSize
(self)¶
-
autoFillBackground
(self) → bool¶
-
backgroundRole
(self) → QPalette.ColorRole¶
-
baseSize
(self) → QSize¶
-
blockSignals
(self, bool) → bool¶
-
changeEvent
(self, QEvent)¶
-
childAt
(self, QPoint) → QWidget¶ childAt(self, int, int) -> QWidget
-
childEvent
(self, QChildEvent)¶
-
children
(self) → List[QObject]¶
-
childrenRect
(self) → QRect¶
-
childrenRegion
(self) → QRegion¶
-
clearFocus
(self)¶
-
clearMask
(self)¶
-
close
(self) → bool¶
-
closeEvent
(self, QCloseEvent)¶
-
colorCount
(self) → int¶
-
connectNotify
(self, QMetaMethod)¶
-
contentsMargins
(self) → QMargins¶
-
contentsRect
(self) → QRect¶
-
contextMenuEvent
(self, QContextMenuEvent)¶
-
contextMenuPolicy
(self) → Qt.ContextMenuPolicy¶
-
create
(self, window: sip.voidptr = 0, initializeWindow: bool = True, destroyOldWindow: bool = True)¶
-
createWindowContainer
(QWindow, parent: QWidget = None, flags: Union[Qt.WindowFlags, Qt.WindowType] = 0) → QWidget¶
-
cursor
(self) → QCursor¶
-
customContextMenuRequested
¶ customContextMenuRequested(self, QPoint) [signal]
-
customEvent
(self, QEvent)¶
-
deactivate
()¶ This function will be called whenever the user selects a different tab. Subclasses can override it if necessary to, e.g., deactivate picking.
-
deleteLater
(self)¶
-
depth
(self) → int¶
-
destroy
(self, destroyWindow: bool = True, destroySubWindows: bool = True)¶
-
destroyed
¶ destroyed(self, object: QObject = None) [signal]
-
devType
(self) → int¶
-
devicePixelRatio
(self) → int¶
-
devicePixelRatioF
(self) → float¶
-
devicePixelRatioFScale
() → float¶
-
disconnect
(self)¶
-
disconnectNotify
(self, QMetaMethod)¶
-
dragEnterEvent
(self, QDragEnterEvent)¶
-
dragLeaveEvent
(self, QDragLeaveEvent)¶
-
dragMoveEvent
(self, QDragMoveEvent)¶
-
dropEvent
(self, QDropEvent)¶
-
dumpObjectInfo
(self)¶
-
dumpObjectTree
(self)¶
-
dynamicPropertyNames
(self) → List[QByteArray]¶
-
effectiveWinId
(self) → sip.voidptr¶
-
ensurePolished
(self)¶
-
enterEvent
(self, QEvent)¶
-
error
(msg)¶ Display an error dialog with the specified message
Parameters: msg (str) – The message to include in the error dialog
-
event
(self, QEvent) → bool¶
-
eventFilter
(self, QObject, QEvent) → bool¶
-
find
(sip.voidptr) → QWidget¶
-
findChild
(self, type, name: str = '', options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) → QObject¶ findChild(self, Tuple, name: str = ‘’, options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) -> QObject
-
findChildren
(self, type, name: str = '', options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) → List[QObject]¶ findChildren(self, Tuple, name: str = ‘’, options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) -> List[QObject] findChildren(self, type, QRegExp, options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) -> List[QObject] findChildren(self, Tuple, QRegExp, options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) -> List[QObject] findChildren(self, type, QRegularExpression, options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) -> List[QObject] findChildren(self, Tuple, QRegularExpression, options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) -> List[QObject]
-
focusInEvent
(self, QFocusEvent)¶
-
focusNextChild
(self) → bool¶
-
focusNextPrevChild
(self, bool) → bool¶
-
focusOutEvent
(self, QFocusEvent)¶
-
focusPolicy
(self) → Qt.FocusPolicy¶
-
focusPreviousChild
(self) → bool¶
-
focusProxy
(self) → QWidget¶
-
focusWidget
(self) → QWidget¶
-
font
(self) → QFont¶
-
fontInfo
(self) → QFontInfo¶
-
fontMetrics
(self) → QFontMetrics¶
-
foregroundRole
(self) → QPalette.ColorRole¶
-
frameGeometry
(self) → QRect¶
-
frameSize
(self) → QSize¶
-
geometry
(self) → QRect¶
-
getContentsMargins
(self) → Tuple[int, int, int, int]¶
-
getDefaultKeywords
()¶ Get the default keywords for this tab. Note that defaults that exist in mmjag should not be explicitly set here.
-
getMmJagKeywords
()¶ Return all keywords that should be put into the mmjag handle. This function should be defined in subclasses.
Returns: All keywords that should be put into the mmjag handle Return type: dict Raises: schrodinger.application.jaguar.gui.utils.JaguarSettingError – If any settings are invalid.
-
grab
(self, rectangle: QRect = QRect(QPoint(0, 0), QSize(-1, -1))) → QPixmap¶
-
grabGesture
(self, Qt.GestureType, flags: Union[Qt.GestureFlags, Qt.GestureFlag] = Qt.GestureFlags())¶
-
grabKeyboard
(self)¶
-
grabMouse
(self)¶ grabMouse(self, Union[QCursor, Qt.CursorShape])
-
grabShortcut
(self, Union[QKeySequence, QKeySequence.StandardKey, str, int], context: Qt.ShortcutContext = Qt.WindowShortcut) → int¶
-
graphicsEffect
(self) → QGraphicsEffect¶
-
graphicsProxyWidget
(self) → QGraphicsProxyWidget¶
-
hasFocus
(self) → bool¶
-
hasHeightForWidth
(self) → bool¶
-
hasMouseTracking
(self) → bool¶
-
hasTabletTracking
(self) → bool¶
-
height
(self) → int¶
-
heightForWidth
(self, int) → int¶
-
heightMM
(self) → int¶
-
hide
(self)¶
-
hideEvent
(self, QHideEvent)¶
-
inherits
(self, str) → bool¶
-
initPainter
(self, QPainter)¶
-
inputMethodEvent
(self, QInputMethodEvent)¶
-
inputMethodHints
(self) → Qt.InputMethodHints¶
-
inputMethodQuery
(self, Qt.InputMethodQuery) → Any¶
-
insertAction
(self, QAction, QAction)¶
-
insertActions
(self, QAction, Iterable[QAction])¶
-
installEventFilter
(self, QObject)¶
-
isActiveWindow
(self) → bool¶
-
isAncestorOf
(self, QWidget) → bool¶
-
isEnabled
(self) → bool¶
-
isEnabledTo
(self, QWidget) → bool¶
-
isFullScreen
(self) → bool¶
-
isHidden
(self) → bool¶
-
isLeftToRight
(self) → bool¶
-
isMaximized
(self) → bool¶
-
isMinimized
(self) → bool¶
-
isModal
(self) → bool¶
-
isRightToLeft
(self) → bool¶
-
isSignalConnected
(self, QMetaMethod) → bool¶
-
isVisible
(self) → bool¶
-
isVisibleTo
(self, QWidget) → bool¶
-
isWidgetType
(self) → bool¶
-
isWindow
(self) → bool¶
-
isWindowModified
(self) → bool¶
-
isWindowType
(self) → bool¶
-
keyPressEvent
(self, QKeyEvent)¶
-
keyReleaseEvent
(self, QKeyEvent)¶
-
keyboardGrabber
() → QWidget¶
-
killTimer
(self, int)¶
-
layout
(self) → QLayout¶
-
layoutDirection
(self) → Qt.LayoutDirection¶
-
leaveEvent
(self, QEvent)¶
-
loadPerAtomSettings
(jag_input, eid=None, title=None)¶ Restore per-atom tab settings from mmjag keywords. This function should be defined in subclasses for any tabs that contain per-atom settings.
Parameters: - jag_input (schrodinger.application.jaguar.input.JaguarInput) – The Jaguar settings to base the tab settings on
- eid (str) – The entry id of the structure in
jag_input
- title (str) – The title of the structure in
jag_input
-
locale
(self) → QLocale¶
-
logicalDpiX
(self) → int¶
-
logicalDpiY
(self) → int¶
-
lower
(self)¶
-
mapFrom
(self, QWidget, QPoint) → QPoint¶
-
mapFromGlobal
(self, QPoint) → QPoint¶
-
mapFromParent
(self, QPoint) → QPoint¶
-
mapTo
(self, QWidget, QPoint) → QPoint¶
-
mapToGlobal
(self, QPoint) → QPoint¶
-
mapToParent
(self, QPoint) → QPoint¶
-
mask
(self) → QRegion¶
-
maximumHeight
(self) → int¶
-
maximumSize
(self) → QSize¶
-
maximumWidth
(self) → int¶
-
metaObject
(self) → QMetaObject¶
-
metric
(self, QPaintDevice.PaintDeviceMetric) → int¶
-
minimumHeight
(self) → int¶
-
minimumSize
(self) → QSize¶
-
minimumSizeHint
(self) → QSize¶
-
minimumWidth
(self) → int¶
-
mouseDoubleClickEvent
(self, QMouseEvent)¶
-
mouseGrabber
() → QWidget¶
-
mouseMoveEvent
(self, QMouseEvent)¶
-
mousePressEvent
(self, QMouseEvent)¶
-
mouseReleaseEvent
(self, QMouseEvent)¶
-
move
(self, QPoint)¶ move(self, int, int)
-
moveEvent
(self, QMoveEvent)¶
-
moveToThread
(self, QThread)¶
-
nativeEvent
(self, Union[QByteArray, bytes, bytearray], sip.voidptr) → Tuple[bool, int]¶
-
nativeParentWidget
(self) → QWidget¶
-
nextInFocusChain
(self) → QWidget¶
-
normalGeometry
(self) → QRect¶
-
objectName
(self) → str¶
-
objectNameChanged
¶ objectNameChanged(self, str) [signal]
-
overrideWindowFlags
(self, Union[Qt.WindowFlags, Qt.WindowType])¶
-
overrideWindowState
(self, Union[Qt.WindowStates, Qt.WindowState])¶
-
paintEngine
(self) → QPaintEngine¶
-
paintEvent
(self, QPaintEvent)¶
-
paintingActive
(self) → bool¶
-
palette
(self) → QPalette¶
-
parent
(self) → QObject¶
-
parentWidget
(self) → QWidget¶
-
physicalDpiX
(self) → int¶
-
physicalDpiY
(self) → int¶
-
pos
(self) → QPoint¶
-
previousInFocusChain
(self) → QWidget¶
-
property
(self, str) → Any¶
-
pyqtConfigure
(...)¶ Each keyword argument is either the name of a Qt property or a Qt signal. For properties the property is set to the given value which should be of an appropriate type. For signals the signal is connected to the given value which should be a callable.
-
raise_
(self)¶
-
receivers
(self, PYQT_SIGNAL) → int¶
-
rect
(self) → QRect¶
-
releaseKeyboard
(self)¶
-
releaseMouse
(self)¶
-
releaseShortcut
(self, int)¶
-
removeAction
(self, QAction)¶
-
removeEventFilter
(self, QObject)¶
-
render
(self, QPaintDevice, targetOffset: QPoint = QPoint(), sourceRegion: QRegion = QRegion(), flags: Union[QWidget.RenderFlags, QWidget.RenderFlag] = QWidget.RenderFlags(QWidget.DrawWindowBackground|QWidget.DrawChildren))¶ render(self, QPainter, targetOffset: QPoint = QPoint(), sourceRegion: QRegion = QRegion(), flags: Union[QWidget.RenderFlags, QWidget.RenderFlag] = QWidget.RenderFlags(QWidget.DrawWindowBackground|QWidget.DrawChildren))
-
repaint
(self)¶ repaint(self, int, int, int, int) repaint(self, QRect) repaint(self, QRegion)
-
resize
(self, QSize)¶ resize(self, int, int)
-
resizeEvent
(self, QResizeEvent)¶
-
restoreGeometry
(self, Union[QByteArray, bytes, bytearray]) → bool¶
-
saveGeometry
(self) → QByteArray¶
-
saveSettings
(jag_input, eid)¶ Save tab settings in jaguar handle. It is only used for settings which are not defined using keywords (typically per-atom settings). This function should be defined in subclasses for any tabs that contain per- atom settings.
Parameters: - jag_input (schrodinger.application.jaguar.input.JaguarInput) – The Jaguar handle to store the tab settings in
- eid (str) – The entry id of the structure in
jag_input
-
scroll
(self, int, int)¶ scroll(self, int, int, QRect)
-
sender
(self) → QObject¶
-
senderSignalIndex
(self) → int¶
-
setAcceptDrops
(self, bool)¶
-
setAccessibleDescription
(self, str)¶
-
setAccessibleName
(self, str)¶
-
setAttribute
(self, Qt.WidgetAttribute, on: bool = True)¶
-
setAutoFillBackground
(self, bool)¶
-
setBackgroundRole
(self, QPalette.ColorRole)¶
-
setBaseSize
(self, int, int)¶ setBaseSize(self, QSize)
-
setContentsMargins
(self, int, int, int, int)¶ setContentsMargins(self, QMargins)
-
setContextMenuPolicy
(self, Qt.ContextMenuPolicy)¶
-
setCursor
(self, Union[QCursor, Qt.CursorShape])¶
-
setDisabled
(self, bool)¶
-
setEnabled
(self, bool)¶
-
setFixedHeight
(self, int)¶
-
setFixedSize
(self, QSize)¶ setFixedSize(self, int, int)
-
setFixedWidth
(self, int)¶
-
setFocus
(self)¶ setFocus(self, Qt.FocusReason)
-
setFocusPolicy
(self, Qt.FocusPolicy)¶
-
setFocusProxy
(self, QWidget)¶
-
setFont
(self, QFont)¶
-
setForegroundRole
(self, QPalette.ColorRole)¶
-
setGeometry
(self, QRect)¶ setGeometry(self, int, int, int, int)
-
setGraphicsEffect
(self, QGraphicsEffect)¶
-
setHidden
(self, bool)¶
-
setInputMethodHints
(self, Union[Qt.InputMethodHints, Qt.InputMethodHint])¶
-
setLayout
(self, QLayout)¶
-
setLayoutDirection
(self, Qt.LayoutDirection)¶
-
setLocale
(self, QLocale)¶
-
setMask
(self, QBitmap)¶ setMask(self, QRegion)
-
setMaximumHeight
(self, int)¶
-
setMaximumSize
(self, int, int)¶ setMaximumSize(self, QSize)
-
setMaximumWidth
(self, int)¶
-
setMinimumHeight
(self, int)¶
-
setMinimumSize
(self, int, int)¶ setMinimumSize(self, QSize)
-
setMinimumWidth
(self, int)¶
-
setMouseTracking
(self, bool)¶
-
setObjectName
(self, str)¶
-
setPalette
(self, QPalette)¶
-
setParent
(self, QWidget)¶ setParent(self, QWidget, Union[Qt.WindowFlags, Qt.WindowType])
-
setProperty
(self, str, Any) → bool¶
-
setShortcutAutoRepeat
(self, int, enabled: bool = True)¶
-
setShortcutEnabled
(self, int, enabled: bool = True)¶
-
setSizeIncrement
(self, int, int)¶ setSizeIncrement(self, QSize)
-
setSizePolicy
(self, QSizePolicy)¶ setSizePolicy(self, QSizePolicy.Policy, QSizePolicy.Policy)
-
setStatusTip
(self, str)¶
-
setStyle
(self, QStyle)¶
-
setStyleSheet
(self, str)¶
-
setTabOrder
(QWidget, QWidget)¶
-
setTabletTracking
(self, bool)¶
-
setToolTip
(self, str)¶
-
setToolTipDuration
(self, int)¶
-
setUpdatesEnabled
(self, bool)¶
-
setVisible
(self, bool)¶
-
setWhatsThis
(self, str)¶
-
setWindowFilePath
(self, str)¶
-
setWindowFlag
(self, Qt.WindowType, on: bool = True)¶
-
setWindowFlags
(self, Union[Qt.WindowFlags, Qt.WindowType])¶
-
setWindowIcon
(self, QIcon)¶
-
setWindowIconText
(self, str)¶
-
setWindowModality
(self, Qt.WindowModality)¶
-
setWindowModified
(self, bool)¶
-
setWindowOpacity
(self, float)¶
-
setWindowRole
(self, str)¶
-
setWindowState
(self, Union[Qt.WindowStates, Qt.WindowState])¶
-
setWindowTitle
(self, str)¶
-
show
(self)¶
-
showEvent
(self, QShowEvent)¶
-
showFullScreen
(self)¶
-
showMaximized
(self)¶
-
showMinimized
(self)¶
-
showNormal
(self)¶
-
signalsBlocked
(self) → bool¶
-
size
(self) → QSize¶
-
sizeHint
(self) → QSize¶
-
sizeIncrement
(self) → QSize¶
-
sizePolicy
(self) → QSizePolicy¶
-
stackUnder
(self, QWidget)¶
-
startTimer
(self, int, timerType: Qt.TimerType = Qt.CoarseTimer) → int¶
-
staticMetaObject
= <PyQt5.QtCore.QMetaObject object>¶
-
statusTip
(self) → str¶
-
structureChanged
¶
-
style
(self) → QStyle¶
-
styleSheet
(self) → str¶
-
tabletEvent
(self, QTabletEvent)¶
-
testAttribute
(self, Qt.WidgetAttribute) → bool¶
-
thread
(self) → QThread¶
-
timerEvent
(self, QTimerEvent)¶
-
toolTip
(self) → str¶
-
toolTipDuration
(self) → int¶
-
tr
(self, str, disambiguation: str = None, n: int = -1) → str¶
-
underMouse
(self) → bool¶
-
ungrabGesture
(self, Qt.GestureType)¶
-
unsetCursor
(self)¶
-
unsetLayoutDirection
(self)¶
-
unsetLocale
(self)¶
-
update
(self)¶ update(self, QRect) update(self, QRegion) update(self, int, int, int, int)
-
updateGeometry
(self)¶
-
updateMicroFocus
(self)¶
-
updatesEnabled
(self) → bool¶
-
visibleRegion
(self) → QRegion¶
-
warning
(msg)¶ Display a warning dialog with the specified message
Parameters: msg (str) – The message to include in the warning dialog
-
whatsThis
(self) → str¶
-
wheelEvent
(self, QWheelEvent)¶
-
width
(self) → int¶
-
widthMM
(self) → int¶
-
winId
(self) → sip.voidptr¶
-
window
(self) → QWidget¶
-
windowFilePath
(self) → str¶
-
windowFlags
(self) → Qt.WindowFlags¶
-
windowHandle
(self) → QWindow¶
-
windowIcon
(self) → QIcon¶
-
windowIconChanged
¶ windowIconChanged(self, QIcon) [signal]
-
windowIconText
(self) → str¶
-
windowIconTextChanged
¶ windowIconTextChanged(self, str) [signal]
-
windowModality
(self) → Qt.WindowModality¶
-
windowOpacity
(self) → float¶
-
windowRole
(self) → str¶
-
windowState
(self) → Qt.WindowStates¶
-
windowTitle
(self) → str¶
-
windowTitleChanged
¶ windowTitleChanged(self, str) [signal]
-
windowType
(self) → Qt.WindowType¶
-
x
(self) → int¶
-
y
(self) → int¶
- MODEL_CLASS (
-
class
schrodinger.application.jaguar.gui.tabs.input_tab.
InputTab
(parent, input_selector=None)¶ Bases:
schrodinger.application.jaguar.gui.tabs.base_tab.ProvidesTheoryMixin
,schrodinger.application.jaguar.gui.tabs.base_tab.ProvidesBasisMixin
,schrodinger.application.jaguar.gui.tabs.input_tab.InputTabBase
An input tab that allows the user to specify basis sets.
-
HELP_TOPIC
= 'JAGUAR_INPUT_TAB'¶
-
UI_MODULES
= (<module 'schrodinger.application.jaguar.gui.ui.input_top_ui' from '/scr/buildbot/savedbuilds/2020-4/NB/build-142/internal/lib/python3.8/site-packages/schrodinger/application/jaguar/gui/ui/input_top_ui.py'>, <module 'schrodinger.application.jaguar.gui.ui.input_std_bottom_ui' from '/scr/buildbot/savedbuilds/2020-4/NB/build-142/internal/lib/python3.8/site-packages/schrodinger/application/jaguar/gui/ui/input_std_bottom_ui.py'>)¶
-
setup
()¶ Perform tab specific initialization. This function should be defined in subclasses if initialization is needed.
-
getDefaultKeywords
()¶ The mmjag default basis set is “”, which would cause a warning, so we set the default basis. Additionally, the mmjag default DFT functional name is “”, which would cause a HF level of theory. Instead, set a default functional of B3LYP-D3.
Returns: A keyword dictionary with the default basis set and functional. Return type: dict
-
loadSettings
(jag_input)¶ Restore tab settings from mmjag keywords. This function should be defined in subclasses.
Parameters: jag_input (schrodinger.application.jaguar.input.JaguarInput) – The Jaguar settings to base the tab settings on
-
getBasis
(mixed_name='Mixed')¶ Get the currently selected basis. If more than one basis set is specified,
mixed_name
will be returned. If the tab does not allow for specifying multiple basis sets, then this argument may be ignored.Parameters: mixed_name (str) – The name to return if more than one basis set is specified Returns: The currently selected basis Return type: str
-
getTheoryLevel
()¶ Get the current theory level
Returns: The current theory level. Return type: str
-
getAllUsedTheoryLevels
()¶ Returns: A tuple of all theory levels used Return type: tuple
-
getMethod
()¶ Get the current method.
Returns: The current method Return type: str
-
getFunctional
(cur_struc=None)¶ Get the current DFT functional.
Parameters: cur_struc (input_tab_widgets.ProjEntryTuple) – Current structure to get functional for. If not specified, functional will be returned based on default theory setting. Returns: The current DFT functional Return type: str or None
-
validate
()¶ Make sure that the tab settings will allow a job to be run successfully. Note that this validation should not be redundant with that performed in
getMmJagKeywords
. Any tab setting that prevents valid mmjag keywords from being generated should causegetMmJagKeywords
to raise a JaguarSettingError. Any tab setting that allows mmjag keywords to be successfully generated but will result in a job failure should cause avalidate
fail. This function should be defined in subclasses if validation is needed.Returns: If the validation passes, None is returned. If the validation fails, a string that describes the error is returned. Return type: str or NoneType
-
getCommonBasis
()¶ If all structures use the same basis set, return the basis set name. Otherwise, return None.
Returns: The basis set name or None Return type: str or NoneType
-
getCommonMethod
()¶ If all structures use the same method, return the method name. Otherwise, return None.
Returns: The method name or None Return type: str or NoneType
-
getCommonTheoryLevel
()¶ Returns: If all current methods are of the same theory level, return the theory level. Otherwise return None. Return type: str or None
-
chargedStrucsPresent
()¶ Determine if the user has specified any molecular charges
Returns: True if the user has specified a molecular charge for any molecule. False otherwise. Return type: bool
-
getBasisForEid
(eid, per_atom_name)¶ Get the basis set for the specified entry id. If there are per-atom basis sets specified for the structure, the
per_atom_name
will be returned.Parameters: - eid (str) – The entry id
- per_atom_name (str) – The name to return if per-atom basis sets are specified
Returns: The basis set name, or
per_atom_name
if per-atom basis sets are specifiedReturn type: Basis
or str
-
getTheoryLevelForEid
(eid)¶ Get the theory level for the specified entry ID.
Parameters: eid – Entry ID to get theory level of. type eid: int
Returns: Theory level for this entry ID. Return type: str
-
getMethodForEid
(eid)¶ Get the method for the specified entry ID.
Parameters: eid – Entry ID to get method of. type eid: int
Returns: Method for this entry ID. Return type: str
-
DrawChildren
= 2¶
-
DrawWindowBackground
= 1¶
-
IgnoreMask
= 4¶
-
MODEL_CLASS
¶ alias of
schrodinger.application.jaguar.gui.input_tab_widgets.InputEntriesModel
-
MULTIPLE_STRUC_JOB_TITLE
= 'batch'¶
-
NAME
= 'Input'¶
-
PROXY_CLASS
¶ alias of
schrodinger.application.jaguar.gui.input_tab_widgets.InputEntriesProxyModel
-
class
PaintDeviceMetric
¶ Bases:
int
-
__init__
= <method-wrapper '__init__' of sip.enumtype object at 0x2e86380>¶
-
-
PdmDepth
= 6¶
-
PdmDevicePixelRatio
= 11¶
-
PdmDevicePixelRatioScaled
= 12¶
-
PdmDpiX
= 7¶
-
PdmDpiY
= 8¶
-
PdmHeight
= 2¶
-
PdmHeightMM
= 4¶
-
PdmNumColors
= 5¶
-
PdmPhysicalDpiX
= 9¶
-
PdmPhysicalDpiY
= 10¶
-
PdmWidth
= 1¶
-
PdmWidthMM
= 3¶
-
class
RenderFlag
¶ Bases:
int
-
__init__
= <method-wrapper '__init__' of sip.enumtype object at 0x30eb450>¶
-
-
class
RenderFlags
¶ Bases:
sip.simplewrapper
QWidget.RenderFlags(Union[QWidget.RenderFlags, QWidget.RenderFlag]) QWidget.RenderFlags(QWidget.RenderFlags)
-
__init__
¶ Initialize self. See help(type(self)) for accurate signature.
-
-
VIEW_CLASS
¶ alias of
schrodinger.application.jaguar.gui.input_tab_widgets.InputEntriesView
-
__init__
(parent, input_selector=None)¶ Perform common tab initialization. All tab specific initialization should go in setup().
Parameters: - parent (PyQt5.QtWidgets.QWidget) – The Qt parent widget
- input_selector (schrodinger.ui.qt.input_selector.InputSelector) – The panel’s input selector widget, if available.
-
acceptDrops
(self) → bool¶
-
accessibleDescription
(self) → str¶
-
accessibleName
(self) → str¶
-
actionEvent
(self, QActionEvent)¶
-
actions
(self) → List[QAction]¶
-
activate
()¶ This function will be called whenever the user selects this tab. Subclasses can override it if necessary to, e.g., activate picking.
-
activateWindow
(self)¶
-
addAction
(self, QAction)¶
-
addActions
(self, Iterable[QAction])¶
-
adjustSize
(self)¶
-
autoFillBackground
(self) → bool¶
-
backgroundRole
(self) → QPalette.ColorRole¶
-
baseSize
(self) → QSize¶
-
basis_changed
¶
-
blockSignals
(self, bool) → bool¶
-
changeEvent
(self, QEvent)¶
-
childAt
(self, QPoint) → QWidget¶ childAt(self, int, int) -> QWidget
-
childEvent
(self, QChildEvent)¶
-
children
(self) → List[QObject]¶
-
childrenRect
(self) → QRect¶
-
childrenRegion
(self) → QRegion¶
-
clearFocus
(self)¶
-
clearMask
(self)¶
-
close
(self) → bool¶
-
closeEvent
(self, QCloseEvent)¶
-
colorCount
(self) → int¶
-
connectNotify
(self, QMetaMethod)¶
-
contentsMargins
(self) → QMargins¶
-
contentsRect
(self) → QRect¶
-
contextMenuEvent
(self, QContextMenuEvent)¶
-
contextMenuPolicy
(self) → Qt.ContextMenuPolicy¶
-
create
(self, window: sip.voidptr = 0, initializeWindow: bool = True, destroyOldWindow: bool = True)¶
-
createWindowContainer
(QWindow, parent: QWidget = None, flags: Union[Qt.WindowFlags, Qt.WindowType] = 0) → QWidget¶
-
cursor
(self) → QCursor¶
-
customContextMenuRequested
¶ customContextMenuRequested(self, QPoint) [signal]
-
customEvent
(self, QEvent)¶
-
deactivate
()¶ This function will be called whenever the user selects a different tab. Subclasses can override it if necessary to, e.g., deactivate picking.
-
deleteLater
(self)¶
-
depth
(self) → int¶
-
destroy
(self, destroyWindow: bool = True, destroySubWindows: bool = True)¶
-
destroyed
¶ destroyed(self, object: QObject = None) [signal]
-
devType
(self) → int¶
-
devicePixelRatio
(self) → int¶
-
devicePixelRatioF
(self) → float¶
-
devicePixelRatioFScale
() → float¶
-
disconnect
(self)¶
-
disconnectNotify
(self, QMetaMethod)¶
-
dragEnterEvent
(self, QDragEnterEvent)¶
-
dragLeaveEvent
(self, QDragLeaveEvent)¶
-
dragMoveEvent
(self, QDragMoveEvent)¶
-
dropEvent
(self, QDropEvent)¶
-
dumpObjectInfo
(self)¶
-
dumpObjectTree
(self)¶
-
dynamicPropertyNames
(self) → List[QByteArray]¶
-
effectiveWinId
(self) → sip.voidptr¶
-
ensurePolished
(self)¶
-
enterEvent
(self, QEvent)¶
-
error
(msg)¶ Display an error dialog with the specified message
Parameters: msg (str) – The message to include in the error dialog
-
event
(self, QEvent) → bool¶
-
eventFilter
(self, QObject, QEvent) → bool¶
-
find
(sip.voidptr) → QWidget¶
-
findChild
(self, type, name: str = '', options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) → QObject¶ findChild(self, Tuple, name: str = ‘’, options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) -> QObject
-
findChildren
(self, type, name: str = '', options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) → List[QObject]¶ findChildren(self, Tuple, name: str = ‘’, options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) -> List[QObject] findChildren(self, type, QRegExp, options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) -> List[QObject] findChildren(self, Tuple, QRegExp, options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) -> List[QObject] findChildren(self, type, QRegularExpression, options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) -> List[QObject] findChildren(self, Tuple, QRegularExpression, options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) -> List[QObject]
-
focusInEvent
(self, QFocusEvent)¶
-
focusNextChild
(self) → bool¶
-
focusNextPrevChild
(self, bool) → bool¶
-
focusOutEvent
(self, QFocusEvent)¶
-
focusPolicy
(self) → Qt.FocusPolicy¶
-
focusPreviousChild
(self) → bool¶
-
focusProxy
(self) → QWidget¶
-
focusWidget
(self) → QWidget¶
-
font
(self) → QFont¶
-
fontInfo
(self) → QFontInfo¶
-
fontMetrics
(self) → QFontMetrics¶
-
foregroundRole
(self) → QPalette.ColorRole¶
-
frameGeometry
(self) → QRect¶
-
frameSize
(self) → QSize¶
-
geometry
(self) → QRect¶
-
getCommonFunctional
()¶ Returns: If all entries use DFT and have the same functional set, return the functional. Otherwise return None. Return type: str or None
-
getContentsMargins
(self) → Tuple[int, int, int, int]¶
-
getMmJagKeywords
()¶ Return all keywords that should be put into the mmjag handle. This function should be defined in subclasses.
Returns: All keywords that should be put into the mmjag handle Return type: dict Raises: schrodinger.application.jaguar.gui.utils.JaguarSettingError – If any settings are invalid.
-
getNumStructures
()¶
-
getStructureTitleForJobname
()¶ Get the structure title to be used in the job name. If the tab includes multiple structures, then
MULTIPLE_STRUC_JOB_TITLE
should be returned. If no structures have been specified yet, then None should be returned.Returns: The structure title Return type: str or NoneType
-
getStructures
()¶ Get all structures loaded into the tab and their associated Jaguar settings
Returns: A list of tuples. Each tuple represents a single structure and contains: - Entry ID of the structure
- A
schrodinger.structure.Structure
object containing the structure itself - A dictionary of keywords specific to the structure
Return type: list
-
grab
(self, rectangle: QRect = QRect(QPoint(0, 0), QSize(-1, -1))) → QPixmap¶
-
grabGesture
(self, Qt.GestureType, flags: Union[Qt.GestureFlags, Qt.GestureFlag] = Qt.GestureFlags())¶
-
grabKeyboard
(self)¶
-
grabMouse
(self)¶ grabMouse(self, Union[QCursor, Qt.CursorShape])
-
grabShortcut
(self, Union[QKeySequence, QKeySequence.StandardKey, str, int], context: Qt.ShortcutContext = Qt.WindowShortcut) → int¶
-
graphicsEffect
(self) → QGraphicsEffect¶
-
graphicsProxyWidget
(self) → QGraphicsProxyWidget¶
-
hasFocus
(self) → bool¶
-
hasHeightForWidth
(self) → bool¶
-
hasMouseTracking
(self) → bool¶
-
hasTabletTracking
(self) → bool¶
-
height
(self) → int¶
-
heightForWidth
(self, int) → int¶
-
heightMM
(self) → int¶
-
hide
(self)¶
-
hideEvent
(self, QHideEvent)¶
-
inherits
(self, str) → bool¶
-
initPainter
(self, QPainter)¶
-
inputMethodEvent
(self, QInputMethodEvent)¶
-
inputMethodHints
(self) → Qt.InputMethodHints¶
-
inputMethodQuery
(self, Qt.InputMethodQuery) → Any¶
-
insertAction
(self, QAction, QAction)¶
-
insertActions
(self, QAction, Iterable[QAction])¶
-
installEventFilter
(self, QObject)¶
-
isActiveWindow
(self) → bool¶
-
isAncestorOf
(self, QWidget) → bool¶
-
isEnabled
(self) → bool¶
-
isEnabledTo
(self, QWidget) → bool¶
-
isFullScreen
(self) → bool¶
-
isHidden
(self) → bool¶
-
isLeftToRight
(self) → bool¶
-
isMaximized
(self) → bool¶
-
isMinimized
(self) → bool¶
-
isModal
(self) → bool¶
-
isRightToLeft
(self) → bool¶
-
isSignalConnected
(self, QMetaMethod) → bool¶
-
isVisible
(self) → bool¶
-
isVisibleTo
(self, QWidget) → bool¶
-
isWidgetType
(self) → bool¶
-
isWindow
(self) → bool¶
-
isWindowModified
(self) → bool¶
-
isWindowType
(self) → bool¶
-
keyPressEvent
(self, QKeyEvent)¶
-
keyReleaseEvent
(self, QKeyEvent)¶
-
keyboardGrabber
() → QWidget¶
-
killTimer
(self, int)¶
-
layout
(self) → QLayout¶
-
layoutDirection
(self) → Qt.LayoutDirection¶
-
leaveEvent
(self, QEvent)¶
-
loadPerAtomSettings
(jag_input, eid=None, title=None)¶ Restore per-atom tab settings from mmjag keywords. This function should be defined in subclasses for any tabs that contain per-atom settings.
Parameters: - jag_input (schrodinger.application.jaguar.input.JaguarInput) – The Jaguar settings to base the tab settings on
- eid (str) – The entry id of the structure in
jag_input
- title (str) – The title of the structure in
jag_input
-
locale
(self) → QLocale¶
-
logicalDpiX
(self) → int¶
-
logicalDpiY
(self) → int¶
-
lower
(self)¶
-
mapFrom
(self, QWidget, QPoint) → QPoint¶
-
mapFromGlobal
(self, QPoint) → QPoint¶
-
mapFromParent
(self, QPoint) → QPoint¶
-
mapTo
(self, QWidget, QPoint) → QPoint¶
-
mapToGlobal
(self, QPoint) → QPoint¶
-
mapToParent
(self, QPoint) → QPoint¶
-
mask
(self) → QRegion¶
-
maximumHeight
(self) → int¶
-
maximumSize
(self) → QSize¶
-
maximumWidth
(self) → int¶
-
metaObject
(self) → QMetaObject¶
-
method_changed
¶
-
metric
(self, QPaintDevice.PaintDeviceMetric) → int¶
-
minimumHeight
(self) → int¶
-
minimumSize
(self) → QSize¶
-
minimumSizeHint
(self) → QSize¶
-
minimumWidth
(self) → int¶
-
mouseDoubleClickEvent
(self, QMouseEvent)¶
-
mouseGrabber
() → QWidget¶
-
mouseMoveEvent
(self, QMouseEvent)¶
-
mousePressEvent
(self, QMouseEvent)¶
-
mouseReleaseEvent
(self, QMouseEvent)¶
-
move
(self, QPoint)¶ move(self, int, int)
-
moveEvent
(self, QMoveEvent)¶
-
moveToThread
(self, QThread)¶
-
nativeEvent
(self, Union[QByteArray, bytes, bytearray], sip.voidptr) → Tuple[bool, int]¶
-
nativeParentWidget
(self) → QWidget¶
-
nextInFocusChain
(self) → QWidget¶
-
normalGeometry
(self) → QRect¶
-
objectName
(self) → str¶
-
objectNameChanged
¶ objectNameChanged(self, str) [signal]
-
overrideWindowFlags
(self, Union[Qt.WindowFlags, Qt.WindowType])¶
-
overrideWindowState
(self, Union[Qt.WindowStates, Qt.WindowState])¶
-
paintEngine
(self) → QPaintEngine¶
-
paintEvent
(self, QPaintEvent)¶
-
paintingActive
(self) → bool¶
-
palette
(self) → QPalette¶
-
parent
(self) → QObject¶
-
parentWidget
(self) → QWidget¶
-
physicalDpiX
(self) → int¶
-
physicalDpiY
(self) → int¶
-
pos
(self) → QPoint¶
-
previousInFocusChain
(self) → QWidget¶
-
projectUpdated
()¶ When the project is updated, update the selected entries table
-
property
(self, str) → Any¶
-
pyqtConfigure
(...)¶ Each keyword argument is either the name of a Qt property or a Qt signal. For properties the property is set to the given value which should be of an appropriate type. For signals the signal is connected to the given value which should be a callable.
-
raise_
(self)¶
-
receivers
(self, PYQT_SIGNAL) → int¶
-
rect
(self) → QRect¶
-
releaseKeyboard
(self)¶
-
releaseMouse
(self)¶
-
releaseShortcut
(self, int)¶
-
removeAction
(self, QAction)¶
-
removeEventFilter
(self, QObject)¶
-
render
(self, QPaintDevice, targetOffset: QPoint = QPoint(), sourceRegion: QRegion = QRegion(), flags: Union[QWidget.RenderFlags, QWidget.RenderFlag] = QWidget.RenderFlags(QWidget.DrawWindowBackground|QWidget.DrawChildren))¶ render(self, QPainter, targetOffset: QPoint = QPoint(), sourceRegion: QRegion = QRegion(), flags: Union[QWidget.RenderFlags, QWidget.RenderFlag] = QWidget.RenderFlags(QWidget.DrawWindowBackground|QWidget.DrawChildren))
-
repaint
(self)¶ repaint(self, int, int, int, int) repaint(self, QRect) repaint(self, QRegion)
-
reset
()¶ Reset any structure specific settings in the table. (The non-struture specific settings will be reset via loadSettings())
-
resize
(self, QSize)¶ resize(self, int, int)
-
resizeEvent
(self, QResizeEvent)¶
-
restoreGeometry
(self, Union[QByteArray, bytes, bytearray]) → bool¶
-
saveGeometry
(self) → QByteArray¶
-
saveSettings
(jag_input, eid)¶ Save tab settings in jaguar handle. It is only used for settings which are not defined using keywords (typically per-atom settings). This function should be defined in subclasses for any tabs that contain per- atom settings.
Parameters: - jag_input (schrodinger.application.jaguar.input.JaguarInput) – The Jaguar handle to store the tab settings in
- eid (str) – The entry id of the structure in
jag_input
-
scroll
(self, int, int)¶ scroll(self, int, int, QRect)
-
sender
(self) → QObject¶
-
senderSignalIndex
(self) → int¶
-
setAcceptDrops
(self, bool)¶
-
setAccessibleDescription
(self, str)¶
-
setAccessibleName
(self, str)¶
-
setAttribute
(self, Qt.WidgetAttribute, on: bool = True)¶
-
setAutoFillBackground
(self, bool)¶
-
setBackgroundRole
(self, QPalette.ColorRole)¶
-
setBaseSize
(self, int, int)¶ setBaseSize(self, QSize)
-
setContentsMargins
(self, int, int, int, int)¶ setContentsMargins(self, QMargins)
-
setContextMenuPolicy
(self, Qt.ContextMenuPolicy)¶
-
setCursor
(self, Union[QCursor, Qt.CursorShape])¶
-
setDisabled
(self, bool)¶
-
setEnabled
(self, bool)¶
-
setFixedHeight
(self, int)¶
-
setFixedSize
(self, QSize)¶ setFixedSize(self, int, int)
-
setFixedWidth
(self, int)¶
-
setFocus
(self)¶ setFocus(self, Qt.FocusReason)
-
setFocusPolicy
(self, Qt.FocusPolicy)¶
-
setFocusProxy
(self, QWidget)¶
-
setFont
(self, QFont)¶
-
setForegroundRole
(self, QPalette.ColorRole)¶
-
setGeometry
(self, QRect)¶ setGeometry(self, int, int, int, int)
-
setGraphicsEffect
(self, QGraphicsEffect)¶
-
setHidden
(self, bool)¶
-
setInputMethodHints
(self, Union[Qt.InputMethodHints, Qt.InputMethodHint])¶
-
setLayout
(self, QLayout)¶
-
setLayoutDirection
(self, Qt.LayoutDirection)¶
-
setLocale
(self, QLocale)¶
-
setMask
(self, QBitmap)¶ setMask(self, QRegion)
-
setMaximumHeight
(self, int)¶
-
setMaximumSize
(self, int, int)¶ setMaximumSize(self, QSize)
-
setMaximumWidth
(self, int)¶
-
setMinimumHeight
(self, int)¶
-
setMinimumSize
(self, int, int)¶ setMinimumSize(self, QSize)
-
setMinimumWidth
(self, int)¶
-
setMouseTracking
(self, bool)¶
-
setObjectName
(self, str)¶
-
setPalette
(self, QPalette)¶
-
setParent
(self, QWidget)¶ setParent(self, QWidget, Union[Qt.WindowFlags, Qt.WindowType])
-
setProperty
(self, str, Any) → bool¶
-
setShortcutAutoRepeat
(self, int, enabled: bool = True)¶
-
setShortcutEnabled
(self, int, enabled: bool = True)¶
-
setSizeIncrement
(self, int, int)¶ setSizeIncrement(self, QSize)
-
setSizePolicy
(self, QSizePolicy)¶ setSizePolicy(self, QSizePolicy.Policy, QSizePolicy.Policy)
-
setStatusTip
(self, str)¶
-
setStyle
(self, QStyle)¶
-
setStyleSheet
(self, str)¶
-
setTabOrder
(QWidget, QWidget)¶
-
setTabletTracking
(self, bool)¶
-
setToolTip
(self, str)¶
-
setToolTipDuration
(self, int)¶
-
setUpdatesEnabled
(self, bool)¶
-
setVisible
(self, bool)¶
-
setWhatsThis
(self, str)¶
-
setWindowFilePath
(self, str)¶
-
setWindowFlag
(self, Qt.WindowType, on: bool = True)¶
-
setWindowFlags
(self, Union[Qt.WindowFlags, Qt.WindowType])¶
-
setWindowIcon
(self, QIcon)¶
-
setWindowIconText
(self, str)¶
-
setWindowModality
(self, Qt.WindowModality)¶
-
setWindowModified
(self, bool)¶
-
setWindowOpacity
(self, float)¶
-
setWindowRole
(self, str)¶
-
setWindowState
(self, Union[Qt.WindowStates, Qt.WindowState])¶
-
setWindowTitle
(self, str)¶
-
show
(self)¶
-
showEvent
(self, QShowEvent)¶
-
showFullScreen
(self)¶
-
showMaximized
(self)¶
-
showMinimized
(self)¶
-
showNormal
(self)¶
-
signalsBlocked
(self) → bool¶
-
size
(self) → QSize¶
-
sizeHint
(self) → QSize¶
-
sizeIncrement
(self) → QSize¶
-
sizePolicy
(self) → QSizePolicy¶
-
stackUnder
(self, QWidget)¶
-
startTimer
(self, int, timerType: Qt.TimerType = Qt.CoarseTimer) → int¶
-
staticMetaObject
= <PyQt5.QtCore.QMetaObject object>¶
-
statusTip
(self) → str¶
-
strucSourceChanged
¶
-
structureChanged
¶
-
style
(self) → QStyle¶
-
styleSheet
(self) → str¶
-
tabletEvent
(self, QTabletEvent)¶
-
testAttribute
(self, Qt.WidgetAttribute) → bool¶
-
thread
(self) → QThread¶
-
timerEvent
(self, QTimerEvent)¶
-
toolTip
(self) → str¶
-
toolTipDuration
(self) → int¶
-
tr
(self, str, disambiguation: str = None, n: int = -1) → str¶
-
underMouse
(self) → bool¶
-
ungrabGesture
(self, Qt.GestureType)¶
-
unsetCursor
(self)¶
-
unsetLayoutDirection
(self)¶
-
unsetLocale
(self)¶
-
update
(self)¶ update(self, QRect) update(self, QRegion) update(self, int, int, int, int)
-
updateGeometry
(self)¶
-
updateMicroFocus
(self)¶
-
updatesEnabled
(self) → bool¶
-
useFromComboChanged
()¶ Respond to the user changing the structure source (from included to selected or vice versa).
-
usingSelected
()¶ Return True if the tab is set to use selected entries. False if the tab is set to use included entries.
-
visibleRegion
(self) → QRegion¶
-
warning
(msg)¶ Display a warning dialog with the specified message
Parameters: msg (str) – The message to include in the warning dialog
-
whatsThis
(self) → str¶
-
wheelEvent
(self, QWheelEvent)¶
-
width
(self) → int¶
-
widthMM
(self) → int¶
-
winId
(self) → sip.voidptr¶
-
window
(self) → QWidget¶
-
windowFilePath
(self) → str¶
-
windowFlags
(self) → Qt.WindowFlags¶
-
windowHandle
(self) → QWindow¶
-
windowIcon
(self) → QIcon¶
-
windowIconChanged
¶ windowIconChanged(self, QIcon) [signal]
-
windowIconText
(self) → str¶
-
windowIconTextChanged
¶ windowIconTextChanged(self, str) [signal]
-
windowModality
(self) → Qt.WindowModality¶
-
windowOpacity
(self) → float¶
-
windowRole
(self) → str¶
-
windowState
(self) → Qt.WindowStates¶
-
windowTitle
(self) → str¶
-
windowTitleChanged
¶ windowTitleChanged(self, str) [signal]
-
windowType
(self) → Qt.WindowType¶
-
workspaceChanged
(what_changed)¶ Update the table whenever the workspace changes in case the user changed the charge of a molecule.
Parameters: what_changed (str) – A flag indicating what changed in the workspace
-
x
(self) → int¶
-
y
(self) → int¶
-
-
class
schrodinger.application.jaguar.gui.tabs.input_tab.
InputTabPka
(parent, input_selector=None)¶ Bases:
schrodinger.application.jaguar.gui.tabs.input_tab.InputTabBase
An input tab that allows the user to specify pKa atoms.
Variables: - set_pka_marker (
PyQt5.QtCore.pyqtSignal
) –A signal emitted when a new pKa atom should be marked in the workspace. Emitted with two arguments:
- The entry id of the structure to be marked (str)
- The atom to be marked (
schrodinger.structure._StructureAtom
)
- remove_all_pka_markers (PyQt5.QtCore.pyqtSignal) – A signal emitted when the panel is reset and should thus remove all markers from the workspace.
-
HELP_TOPIC
= 'JAGUAR_INPUT_TAB'¶
-
UI_MODULES
= (<module 'schrodinger.application.jaguar.gui.ui.input_pka_top_ui' from '/scr/buildbot/savedbuilds/2020-4/NB/build-142/internal/lib/python3.8/site-packages/schrodinger/application/jaguar/gui/ui/input_pka_top_ui.py'>, <module 'schrodinger.application.jaguar.gui.ui.input_pka_bottom_ui' from '/scr/buildbot/savedbuilds/2020-4/NB/build-142/internal/lib/python3.8/site-packages/schrodinger/application/jaguar/gui/ui/input_pka_bottom_ui.py'>)¶
-
MODEL_CLASS
¶ alias of
schrodinger.application.jaguar.gui.input_tab_widgets_pka.InputEntriesModelPka
-
VIEW_CLASS
¶ alias of
schrodinger.application.jaguar.gui.input_tab_widgets_pka.InputEntriesViewPka
-
set_pka_marker
¶
-
remove_all_pka_markers
¶
-
SMARTS
= 'SMARTS'¶
-
SMARTS_TOOLTIP
= ''¶
-
AUTO
= 'Automatic search'¶
-
AUTO_TOOLTIP
= 'Application will attempt to locate all pKa atoms in all structures.\nStructures must be in the appropriate protonation form.\nNote that this search is not perfect and may miss some atoms or include others erroneously.'¶
-
setup
()¶ Perform tab specific initialization. This function should be defined in subclasses if initialization is needed.
-
onFindCheckToggled
(state)¶ If checked, disable editing of pka atom and enable combobox for choosing of pick mode. Update model to reflect new pick mode. Show smarts selector if new picking mode is SMARTS.
Parameters: state (bool) – If checkbox is checked or not
-
onPickModeComboChanged
()¶ Update model to reflect new pick mode. Show smarts selector if new picking mode is SMARTS.
-
onPickModeChanged
()¶ Update the model to reflect the new pick mode. If its SMARTS show and hide the define label and connect signals.
-
showDefineButton
()¶ Show the define label
-
hideDefineButton
()¶ Hide the define label
-
getPickingMode
()¶ Determine the current picking mode the tab is in
Returns: picking mode Return type: input_tab_widgets_pka.PickingModes
-
runSmartsSearch
()¶ Run SMARTS searches on the entries in the entry table if the pick mode is SMARTS
-
getMmJagKeywords
()¶ Return all keywords that should be put into the mmjag handle. This function should be defined in subclasses.
Returns: All keywords that should be put into the mmjag handle Return type: dict Raises: schrodinger.application.jaguar.gui.utils.JaguarSettingError – If any settings are invalid.
-
isZwitterionChecked
()¶
-
isConformationalSearchesChecked
()¶
-
validate
()¶ Make sure that the tab settings will allow a job to be run successfully. Note that this validation should not be redundant with that performed in
getMmJagKeywords
. Any tab setting that prevents valid mmjag keywords from being generated should causegetMmJagKeywords
to raise a JaguarSettingError. Any tab setting that allows mmjag keywords to be successfully generated but will result in a job failure should cause avalidate
fail. This function should be defined in subclasses if validation is needed.Returns: If the validation passes, None is returned. If the validation fails, a string that describes the error is returned. Return type: str or NoneType
-
loadSettings
(jag_input)¶ Restore tab settings from mmjag keywords. This function should be defined in subclasses.
Parameters: jag_input (schrodinger.application.jaguar.input.JaguarInput) – The Jaguar settings to base the tab settings on
-
setPickMethodToManual
()¶
-
setPickMethodToAuto
()¶
-
reset
()¶ Reset any structure specific settings in the table. (The non-struture specific settings will be reset via loadSettings())
-
DrawChildren
= 2¶
-
DrawWindowBackground
= 1¶
-
IgnoreMask
= 4¶
-
MULTIPLE_STRUC_JOB_TITLE
= 'batch'¶
-
NAME
= 'Input'¶
-
PROXY_CLASS
¶ alias of
schrodinger.application.jaguar.gui.input_tab_widgets.InputEntriesProxyModel
-
class
PaintDeviceMetric
¶ Bases:
int
-
__init__
= <method-wrapper '__init__' of sip.enumtype object at 0x2e86380>¶
-
-
PdmDepth
= 6¶
-
PdmDevicePixelRatio
= 11¶
-
PdmDevicePixelRatioScaled
= 12¶
-
PdmDpiX
= 7¶
-
PdmDpiY
= 8¶
-
PdmHeight
= 2¶
-
PdmHeightMM
= 4¶
-
PdmNumColors
= 5¶
-
PdmPhysicalDpiX
= 9¶
-
PdmPhysicalDpiY
= 10¶
-
PdmWidth
= 1¶
-
PdmWidthMM
= 3¶
-
class
RenderFlag
¶ Bases:
int
-
__init__
= <method-wrapper '__init__' of sip.enumtype object at 0x30eb450>¶
-
-
class
RenderFlags
¶ Bases:
sip.simplewrapper
QWidget.RenderFlags(Union[QWidget.RenderFlags, QWidget.RenderFlag]) QWidget.RenderFlags(QWidget.RenderFlags)
-
__init__
¶ Initialize self. See help(type(self)) for accurate signature.
-
-
__init__
(parent, input_selector=None)¶ Perform common tab initialization. All tab specific initialization should go in setup().
Parameters: - parent (PyQt5.QtWidgets.QWidget) – The Qt parent widget
- input_selector (schrodinger.ui.qt.input_selector.InputSelector) – The panel’s input selector widget, if available.
-
acceptDrops
(self) → bool¶
-
accessibleDescription
(self) → str¶
-
accessibleName
(self) → str¶
-
actionEvent
(self, QActionEvent)¶
-
actions
(self) → List[QAction]¶
-
activate
()¶ This function will be called whenever the user selects this tab. Subclasses can override it if necessary to, e.g., activate picking.
-
activateWindow
(self)¶
-
addAction
(self, QAction)¶
-
addActions
(self, Iterable[QAction])¶
-
adjustSize
(self)¶
-
autoFillBackground
(self) → bool¶
-
backgroundRole
(self) → QPalette.ColorRole¶
-
baseSize
(self) → QSize¶
-
blockSignals
(self, bool) → bool¶
-
changeEvent
(self, QEvent)¶
-
childAt
(self, QPoint) → QWidget¶ childAt(self, int, int) -> QWidget
-
childEvent
(self, QChildEvent)¶
-
children
(self) → List[QObject]¶
-
childrenRect
(self) → QRect¶
-
childrenRegion
(self) → QRegion¶
-
clearFocus
(self)¶
-
clearMask
(self)¶
-
close
(self) → bool¶
-
closeEvent
(self, QCloseEvent)¶
-
colorCount
(self) → int¶
-
connectNotify
(self, QMetaMethod)¶
-
contentsMargins
(self) → QMargins¶
-
contentsRect
(self) → QRect¶
-
contextMenuEvent
(self, QContextMenuEvent)¶
-
contextMenuPolicy
(self) → Qt.ContextMenuPolicy¶
-
create
(self, window: sip.voidptr = 0, initializeWindow: bool = True, destroyOldWindow: bool = True)¶
-
createWindowContainer
(QWindow, parent: QWidget = None, flags: Union[Qt.WindowFlags, Qt.WindowType] = 0) → QWidget¶
-
cursor
(self) → QCursor¶
-
customContextMenuRequested
¶ customContextMenuRequested(self, QPoint) [signal]
-
customEvent
(self, QEvent)¶
-
deactivate
()¶ This function will be called whenever the user selects a different tab. Subclasses can override it if necessary to, e.g., deactivate picking.
-
deleteLater
(self)¶
-
depth
(self) → int¶
-
destroy
(self, destroyWindow: bool = True, destroySubWindows: bool = True)¶
-
destroyed
¶ destroyed(self, object: QObject = None) [signal]
-
devType
(self) → int¶
-
devicePixelRatio
(self) → int¶
-
devicePixelRatioF
(self) → float¶
-
devicePixelRatioFScale
() → float¶
-
disconnect
(self)¶
-
disconnectNotify
(self, QMetaMethod)¶
-
dragEnterEvent
(self, QDragEnterEvent)¶
-
dragLeaveEvent
(self, QDragLeaveEvent)¶
-
dragMoveEvent
(self, QDragMoveEvent)¶
-
dropEvent
(self, QDropEvent)¶
-
dumpObjectInfo
(self)¶
-
dumpObjectTree
(self)¶
-
dynamicPropertyNames
(self) → List[QByteArray]¶
-
effectiveWinId
(self) → sip.voidptr¶
-
ensurePolished
(self)¶
-
enterEvent
(self, QEvent)¶
-
error
(msg)¶ Display an error dialog with the specified message
Parameters: msg (str) – The message to include in the error dialog
-
event
(self, QEvent) → bool¶
-
eventFilter
(self, QObject, QEvent) → bool¶
-
find
(sip.voidptr) → QWidget¶
-
findChild
(self, type, name: str = '', options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) → QObject¶ findChild(self, Tuple, name: str = ‘’, options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) -> QObject
-
findChildren
(self, type, name: str = '', options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) → List[QObject]¶ findChildren(self, Tuple, name: str = ‘’, options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) -> List[QObject] findChildren(self, type, QRegExp, options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) -> List[QObject] findChildren(self, Tuple, QRegExp, options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) -> List[QObject] findChildren(self, type, QRegularExpression, options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) -> List[QObject] findChildren(self, Tuple, QRegularExpression, options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) -> List[QObject]
-
focusInEvent
(self, QFocusEvent)¶
-
focusNextChild
(self) → bool¶
-
focusNextPrevChild
(self, bool) → bool¶
-
focusOutEvent
(self, QFocusEvent)¶
-
focusPolicy
(self) → Qt.FocusPolicy¶
-
focusPreviousChild
(self) → bool¶
-
focusProxy
(self) → QWidget¶
-
focusWidget
(self) → QWidget¶
-
font
(self) → QFont¶
-
fontInfo
(self) → QFontInfo¶
-
fontMetrics
(self) → QFontMetrics¶
-
foregroundRole
(self) → QPalette.ColorRole¶
-
frameGeometry
(self) → QRect¶
-
frameSize
(self) → QSize¶
-
geometry
(self) → QRect¶
-
getContentsMargins
(self) → Tuple[int, int, int, int]¶
-
getDefaultKeywords
()¶ Get the default keywords for this tab. Note that defaults that exist in mmjag should not be explicitly set here.
-
getNumStructures
()¶
-
getStructureTitleForJobname
()¶ Get the structure title to be used in the job name. If the tab includes multiple structures, then
MULTIPLE_STRUC_JOB_TITLE
should be returned. If no structures have been specified yet, then None should be returned.Returns: The structure title Return type: str or NoneType
-
getStructures
()¶ Get all structures loaded into the tab and their associated Jaguar settings
Returns: A list of tuples. Each tuple represents a single structure and contains: - Entry ID of the structure
- A
schrodinger.structure.Structure
object containing the structure itself - A dictionary of keywords specific to the structure
Return type: list
-
grab
(self, rectangle: QRect = QRect(QPoint(0, 0), QSize(-1, -1))) → QPixmap¶
-
grabGesture
(self, Qt.GestureType, flags: Union[Qt.GestureFlags, Qt.GestureFlag] = Qt.GestureFlags())¶
-
grabKeyboard
(self)¶
-
grabMouse
(self)¶ grabMouse(self, Union[QCursor, Qt.CursorShape])
-
grabShortcut
(self, Union[QKeySequence, QKeySequence.StandardKey, str, int], context: Qt.ShortcutContext = Qt.WindowShortcut) → int¶
-
graphicsEffect
(self) → QGraphicsEffect¶
-
graphicsProxyWidget
(self) → QGraphicsProxyWidget¶
-
hasFocus
(self) → bool¶
-
hasHeightForWidth
(self) → bool¶
-
hasMouseTracking
(self) → bool¶
-
hasTabletTracking
(self) → bool¶
-
height
(self) → int¶
-
heightForWidth
(self, int) → int¶
-
heightMM
(self) → int¶
-
hide
(self)¶
-
hideEvent
(self, QHideEvent)¶
-
inherits
(self, str) → bool¶
-
initPainter
(self, QPainter)¶
-
inputMethodEvent
(self, QInputMethodEvent)¶
-
inputMethodHints
(self) → Qt.InputMethodHints¶
-
inputMethodQuery
(self, Qt.InputMethodQuery) → Any¶
-
insertAction
(self, QAction, QAction)¶
-
insertActions
(self, QAction, Iterable[QAction])¶
-
installEventFilter
(self, QObject)¶
-
isActiveWindow
(self) → bool¶
-
isAncestorOf
(self, QWidget) → bool¶
-
isEnabled
(self) → bool¶
-
isEnabledTo
(self, QWidget) → bool¶
-
isFullScreen
(self) → bool¶
-
isHidden
(self) → bool¶
-
isLeftToRight
(self) → bool¶
-
isMaximized
(self) → bool¶
-
isMinimized
(self) → bool¶
-
isModal
(self) → bool¶
-
isRightToLeft
(self) → bool¶
-
isSignalConnected
(self, QMetaMethod) → bool¶
-
isVisible
(self) → bool¶
-
isVisibleTo
(self, QWidget) → bool¶
-
isWidgetType
(self) → bool¶
-
isWindow
(self) → bool¶
-
isWindowModified
(self) → bool¶
-
isWindowType
(self) → bool¶
-
keyPressEvent
(self, QKeyEvent)¶
-
keyReleaseEvent
(self, QKeyEvent)¶
-
keyboardGrabber
() → QWidget¶
-
killTimer
(self, int)¶
-
layout
(self) → QLayout¶
-
layoutDirection
(self) → Qt.LayoutDirection¶
-
leaveEvent
(self, QEvent)¶
-
loadPerAtomSettings
(jag_input, eid=None, title=None)¶ Restore per-atom tab settings from mmjag keywords. This function should be defined in subclasses for any tabs that contain per-atom settings.
Parameters: - jag_input (schrodinger.application.jaguar.input.JaguarInput) – The Jaguar settings to base the tab settings on
- eid (str) – The entry id of the structure in
jag_input
- title (str) – The title of the structure in
jag_input
-
locale
(self) → QLocale¶
-
logicalDpiX
(self) → int¶
-
logicalDpiY
(self) → int¶
-
lower
(self)¶
-
mapFrom
(self, QWidget, QPoint) → QPoint¶
-
mapFromGlobal
(self, QPoint) → QPoint¶
-
mapFromParent
(self, QPoint) → QPoint¶
-
mapTo
(self, QWidget, QPoint) → QPoint¶
-
mapToGlobal
(self, QPoint) → QPoint¶
-
mapToParent
(self, QPoint) → QPoint¶
-
mask
(self) → QRegion¶
-
maximumHeight
(self) → int¶
-
maximumSize
(self) → QSize¶
-
maximumWidth
(self) → int¶
-
metaObject
(self) → QMetaObject¶
-
metric
(self, QPaintDevice.PaintDeviceMetric) → int¶
-
minimumHeight
(self) → int¶
-
minimumSize
(self) → QSize¶
-
minimumSizeHint
(self) → QSize¶
-
minimumWidth
(self) → int¶
-
mouseDoubleClickEvent
(self, QMouseEvent)¶
-
mouseGrabber
() → QWidget¶
-
mouseMoveEvent
(self, QMouseEvent)¶
-
mousePressEvent
(self, QMouseEvent)¶
-
mouseReleaseEvent
(self, QMouseEvent)¶
-
move
(self, QPoint)¶ move(self, int, int)
-
moveEvent
(self, QMoveEvent)¶
-
moveToThread
(self, QThread)¶
-
nativeEvent
(self, Union[QByteArray, bytes, bytearray], sip.voidptr) → Tuple[bool, int]¶
-
nativeParentWidget
(self) → QWidget¶
-
nextInFocusChain
(self) → QWidget¶
-
normalGeometry
(self) → QRect¶
-
objectName
(self) → str¶
-
objectNameChanged
¶ objectNameChanged(self, str) [signal]
-
overrideWindowFlags
(self, Union[Qt.WindowFlags, Qt.WindowType])¶
-
overrideWindowState
(self, Union[Qt.WindowStates, Qt.WindowState])¶
-
paintEngine
(self) → QPaintEngine¶
-
paintEvent
(self, QPaintEvent)¶
-
paintingActive
(self) → bool¶
-
palette
(self) → QPalette¶
-
parent
(self) → QObject¶
-
parentWidget
(self) → QWidget¶
-
physicalDpiX
(self) → int¶
-
physicalDpiY
(self) → int¶
-
pos
(self) → QPoint¶
-
previousInFocusChain
(self) → QWidget¶
-
projectUpdated
()¶ When the project is updated, update the selected entries table
-
property
(self, str) → Any¶
-
pyqtConfigure
(...)¶ Each keyword argument is either the name of a Qt property or a Qt signal. For properties the property is set to the given value which should be of an appropriate type. For signals the signal is connected to the given value which should be a callable.
-
raise_
(self)¶
-
receivers
(self, PYQT_SIGNAL) → int¶
-
rect
(self) → QRect¶
-
releaseKeyboard
(self)¶
-
releaseMouse
(self)¶
-
releaseShortcut
(self, int)¶
-
removeAction
(self, QAction)¶
-
removeEventFilter
(self, QObject)¶
-
render
(self, QPaintDevice, targetOffset: QPoint = QPoint(), sourceRegion: QRegion = QRegion(), flags: Union[QWidget.RenderFlags, QWidget.RenderFlag] = QWidget.RenderFlags(QWidget.DrawWindowBackground|QWidget.DrawChildren))¶ render(self, QPainter, targetOffset: QPoint = QPoint(), sourceRegion: QRegion = QRegion(), flags: Union[QWidget.RenderFlags, QWidget.RenderFlag] = QWidget.RenderFlags(QWidget.DrawWindowBackground|QWidget.DrawChildren))
-
repaint
(self)¶ repaint(self, int, int, int, int) repaint(self, QRect) repaint(self, QRegion)
-
resize
(self, QSize)¶ resize(self, int, int)
-
resizeEvent
(self, QResizeEvent)¶
-
restoreGeometry
(self, Union[QByteArray, bytes, bytearray]) → bool¶
-
saveGeometry
(self) → QByteArray¶
-
saveSettings
(jag_input, eid)¶ Save tab settings in jaguar handle. It is only used for settings which are not defined using keywords (typically per-atom settings). This function should be defined in subclasses for any tabs that contain per- atom settings.
Parameters: - jag_input (schrodinger.application.jaguar.input.JaguarInput) – The Jaguar handle to store the tab settings in
- eid (str) – The entry id of the structure in
jag_input
-
scroll
(self, int, int)¶ scroll(self, int, int, QRect)
-
sender
(self) → QObject¶
-
senderSignalIndex
(self) → int¶
-
setAcceptDrops
(self, bool)¶
-
setAccessibleDescription
(self, str)¶
-
setAccessibleName
(self, str)¶
-
setAttribute
(self, Qt.WidgetAttribute, on: bool = True)¶
-
setAutoFillBackground
(self, bool)¶
-
setBackgroundRole
(self, QPalette.ColorRole)¶
-
setBaseSize
(self, int, int)¶ setBaseSize(self, QSize)
-
setContentsMargins
(self, int, int, int, int)¶ setContentsMargins(self, QMargins)
-
setContextMenuPolicy
(self, Qt.ContextMenuPolicy)¶
-
setCursor
(self, Union[QCursor, Qt.CursorShape])¶
-
setDisabled
(self, bool)¶
-
setEnabled
(self, bool)¶
-
setFixedHeight
(self, int)¶
-
setFixedSize
(self, QSize)¶ setFixedSize(self, int, int)
-
setFixedWidth
(self, int)¶
-
setFocus
(self)¶ setFocus(self, Qt.FocusReason)
-
setFocusPolicy
(self, Qt.FocusPolicy)¶
-
setFocusProxy
(self, QWidget)¶
-
setFont
(self, QFont)¶
-
setForegroundRole
(self, QPalette.ColorRole)¶
-
setGeometry
(self, QRect)¶ setGeometry(self, int, int, int, int)
-
setGraphicsEffect
(self, QGraphicsEffect)¶
-
setHidden
(self, bool)¶
-
setInputMethodHints
(self, Union[Qt.InputMethodHints, Qt.InputMethodHint])¶
-
setLayout
(self, QLayout)¶
-
setLayoutDirection
(self, Qt.LayoutDirection)¶
-
setLocale
(self, QLocale)¶
-
setMask
(self, QBitmap)¶ setMask(self, QRegion)
-
setMaximumHeight
(self, int)¶
-
setMaximumSize
(self, int, int)¶ setMaximumSize(self, QSize)
-
setMaximumWidth
(self, int)¶
-
setMinimumHeight
(self, int)¶
-
setMinimumSize
(self, int, int)¶ setMinimumSize(self, QSize)
-
setMinimumWidth
(self, int)¶
-
setMouseTracking
(self, bool)¶
-
setObjectName
(self, str)¶
-
setPalette
(self, QPalette)¶
-
setParent
(self, QWidget)¶ setParent(self, QWidget, Union[Qt.WindowFlags, Qt.WindowType])
-
setProperty
(self, str, Any) → bool¶
-
setShortcutAutoRepeat
(self, int, enabled: bool = True)¶
-
setShortcutEnabled
(self, int, enabled: bool = True)¶
-
setSizeIncrement
(self, int, int)¶ setSizeIncrement(self, QSize)
-
setSizePolicy
(self, QSizePolicy)¶ setSizePolicy(self, QSizePolicy.Policy, QSizePolicy.Policy)
-
setStatusTip
(self, str)¶
-
setStyle
(self, QStyle)¶
-
setStyleSheet
(self, str)¶
-
setTabOrder
(QWidget, QWidget)¶
-
setTabletTracking
(self, bool)¶
-
setToolTip
(self, str)¶
-
setToolTipDuration
(self, int)¶
-
setUpdatesEnabled
(self, bool)¶
-
setVisible
(self, bool)¶
-
setWhatsThis
(self, str)¶
-
setWindowFilePath
(self, str)¶
-
setWindowFlag
(self, Qt.WindowType, on: bool = True)¶
-
setWindowFlags
(self, Union[Qt.WindowFlags, Qt.WindowType])¶
-
setWindowIcon
(self, QIcon)¶
-
setWindowIconText
(self, str)¶
-
setWindowModality
(self, Qt.WindowModality)¶
-
setWindowModified
(self, bool)¶
-
setWindowOpacity
(self, float)¶
-
setWindowRole
(self, str)¶
-
setWindowState
(self, Union[Qt.WindowStates, Qt.WindowState])¶
-
setWindowTitle
(self, str)¶
-
show
(self)¶
-
showEvent
(self, QShowEvent)¶
-
showFullScreen
(self)¶
-
showMaximized
(self)¶
-
showMinimized
(self)¶
-
showNormal
(self)¶
-
signalsBlocked
(self) → bool¶
-
size
(self) → QSize¶
-
sizeHint
(self) → QSize¶
-
sizeIncrement
(self) → QSize¶
-
sizePolicy
(self) → QSizePolicy¶
-
stackUnder
(self, QWidget)¶
-
startTimer
(self, int, timerType: Qt.TimerType = Qt.CoarseTimer) → int¶
-
staticMetaObject
= <PyQt5.QtCore.QMetaObject object>¶
-
statusTip
(self) → str¶
-
strucSourceChanged
¶
-
structureChanged
¶
-
style
(self) → QStyle¶
-
styleSheet
(self) → str¶
-
tabletEvent
(self, QTabletEvent)¶
-
testAttribute
(self, Qt.WidgetAttribute) → bool¶
-
thread
(self) → QThread¶
-
timerEvent
(self, QTimerEvent)¶
-
toolTip
(self) → str¶
-
toolTipDuration
(self) → int¶
-
tr
(self, str, disambiguation: str = None, n: int = -1) → str¶
-
underMouse
(self) → bool¶
-
ungrabGesture
(self, Qt.GestureType)¶
-
unsetCursor
(self)¶
-
unsetLayoutDirection
(self)¶
-
unsetLocale
(self)¶
-
update
(self)¶ update(self, QRect) update(self, QRegion) update(self, int, int, int, int)
-
updateGeometry
(self)¶
-
updateMicroFocus
(self)¶
-
updatesEnabled
(self) → bool¶
-
useFromComboChanged
()¶ Respond to the user changing the structure source (from included to selected or vice versa).
-
usingSelected
()¶ Return True if the tab is set to use selected entries. False if the tab is set to use included entries.
-
visibleRegion
(self) → QRegion¶
-
warning
(msg)¶ Display a warning dialog with the specified message
Parameters: msg (str) – The message to include in the warning dialog
-
whatsThis
(self) → str¶
-
wheelEvent
(self, QWheelEvent)¶
-
width
(self) → int¶
-
widthMM
(self) → int¶
-
winId
(self) → sip.voidptr¶
-
window
(self) → QWidget¶
-
windowFilePath
(self) → str¶
-
windowFlags
(self) → Qt.WindowFlags¶
-
windowHandle
(self) → QWindow¶
-
windowIcon
(self) → QIcon¶
-
windowIconChanged
¶ windowIconChanged(self, QIcon) [signal]
-
windowIconText
(self) → str¶
-
windowIconTextChanged
¶ windowIconTextChanged(self, str) [signal]
-
windowModality
(self) → Qt.WindowModality¶
-
windowOpacity
(self) → float¶
-
windowRole
(self) → str¶
-
windowState
(self) → Qt.WindowStates¶
-
windowTitle
(self) → str¶
-
windowTitleChanged
¶ windowTitleChanged(self, str) [signal]
-
windowType
(self) → Qt.WindowType¶
-
workspaceChanged
(what_changed)¶ Update the table whenever the workspace changes in case the user changed the charge of a molecule.
Parameters: what_changed (str) – A flag indicating what changed in the workspace
-
x
(self) → int¶
-
y
(self) → int¶
- set_pka_marker (
-
class
schrodinger.application.jaguar.gui.tabs.input_tab.
InputTabHB
(parent, input_selector=None)¶ Bases:
schrodinger.application.jaguar.gui.tabs.input_tab.InputTabBase
An input tab that is used with Hydrogen Bond task.
-
HELP_TOPIC
= 'JAGUAR_HYDROGEN_BOND'¶
-
UI_MODULES
= (<module 'schrodinger.application.jaguar.gui.ui.input_hb_top_ui' from '/scr/buildbot/savedbuilds/2020-4/NB/build-142/internal/lib/python3.8/site-packages/schrodinger/application/jaguar/gui/ui/input_hb_top_ui.py'>, <module 'schrodinger.application.jaguar.gui.ui.input_hb_bottom_ui' from '/scr/buildbot/savedbuilds/2020-4/NB/build-142/internal/lib/python3.8/site-packages/schrodinger/application/jaguar/gui/ui/input_hb_bottom_ui.py'>)¶
-
MODEL_CLASS
¶ alias of
schrodinger.application.jaguar.gui.input_tab_widgets_hb.InputEntriesModelHB
-
VIEW_CLASS
¶ alias of
schrodinger.application.jaguar.gui.input_tab_widgets.InputEntriesView
-
getMmJagKeywords
()¶ There are no jaguar handle keywords that this tab sets, but we need this function to override the one in the base class.
-
loadSettings
(jag_input)¶ Restore tab settings from mmjag keywords. This function should be defined in subclasses.
Parameters: jag_input (schrodinger.application.jaguar.input.JaguarInput) – The Jaguar settings to base the tab settings on
-
isFastMode
()¶ This function return True if ‘Fast Mode’ check box is checked.
Returns: True if ‘Fast Mode’ check box is toggled. Return type: bool
-
getOptimizationCmd
()¶ This function returns command argument corresponding to the checked optimization option. If ‘Optimize all structure’ option is selected this function returns None.
Returns: optimization command argument Return type: string or None
-
reset
()¶ This function resets optimization and ‘fast mode’ settings to default state. This function needs to be called every time when input file is loaded.
-
DrawChildren
= 2¶
-
DrawWindowBackground
= 1¶
-
IgnoreMask
= 4¶
-
MULTIPLE_STRUC_JOB_TITLE
= 'batch'¶
-
NAME
= 'Input'¶
-
PROXY_CLASS
¶ alias of
schrodinger.application.jaguar.gui.input_tab_widgets.InputEntriesProxyModel
-
class
PaintDeviceMetric
¶ Bases:
int
-
__init__
= <method-wrapper '__init__' of sip.enumtype object at 0x2e86380>¶
-
-
PdmDepth
= 6¶
-
PdmDevicePixelRatio
= 11¶
-
PdmDevicePixelRatioScaled
= 12¶
-
PdmDpiX
= 7¶
-
PdmDpiY
= 8¶
-
PdmHeight
= 2¶
-
PdmHeightMM
= 4¶
-
PdmNumColors
= 5¶
-
PdmPhysicalDpiX
= 9¶
-
PdmPhysicalDpiY
= 10¶
-
PdmWidth
= 1¶
-
PdmWidthMM
= 3¶
-
class
RenderFlag
¶ Bases:
int
-
__init__
= <method-wrapper '__init__' of sip.enumtype object at 0x30eb450>¶
-
-
class
RenderFlags
¶ Bases:
sip.simplewrapper
QWidget.RenderFlags(Union[QWidget.RenderFlags, QWidget.RenderFlag]) QWidget.RenderFlags(QWidget.RenderFlags)
-
__init__
¶ Initialize self. See help(type(self)) for accurate signature.
-
-
__init__
(parent, input_selector=None)¶ Perform common tab initialization. All tab specific initialization should go in setup().
Parameters: - parent (PyQt5.QtWidgets.QWidget) – The Qt parent widget
- input_selector (schrodinger.ui.qt.input_selector.InputSelector) – The panel’s input selector widget, if available.
-
acceptDrops
(self) → bool¶
-
accessibleDescription
(self) → str¶
-
accessibleName
(self) → str¶
-
actionEvent
(self, QActionEvent)¶
-
actions
(self) → List[QAction]¶
-
activate
()¶ This function will be called whenever the user selects this tab. Subclasses can override it if necessary to, e.g., activate picking.
-
activateWindow
(self)¶
-
addAction
(self, QAction)¶
-
addActions
(self, Iterable[QAction])¶
-
adjustSize
(self)¶
-
autoFillBackground
(self) → bool¶
-
backgroundRole
(self) → QPalette.ColorRole¶
-
baseSize
(self) → QSize¶
-
blockSignals
(self, bool) → bool¶
-
changeEvent
(self, QEvent)¶
-
childAt
(self, QPoint) → QWidget¶ childAt(self, int, int) -> QWidget
-
childEvent
(self, QChildEvent)¶
-
children
(self) → List[QObject]¶
-
childrenRect
(self) → QRect¶
-
childrenRegion
(self) → QRegion¶
-
clearFocus
(self)¶
-
clearMask
(self)¶
-
close
(self) → bool¶
-
closeEvent
(self, QCloseEvent)¶
-
colorCount
(self) → int¶
-
connectNotify
(self, QMetaMethod)¶
-
contentsMargins
(self) → QMargins¶
-
contentsRect
(self) → QRect¶
-
contextMenuEvent
(self, QContextMenuEvent)¶
-
contextMenuPolicy
(self) → Qt.ContextMenuPolicy¶
-
create
(self, window: sip.voidptr = 0, initializeWindow: bool = True, destroyOldWindow: bool = True)¶
-
createWindowContainer
(QWindow, parent: QWidget = None, flags: Union[Qt.WindowFlags, Qt.WindowType] = 0) → QWidget¶
-
cursor
(self) → QCursor¶
-
customContextMenuRequested
¶ customContextMenuRequested(self, QPoint) [signal]
-
customEvent
(self, QEvent)¶
-
deactivate
()¶ This function will be called whenever the user selects a different tab. Subclasses can override it if necessary to, e.g., deactivate picking.
-
deleteLater
(self)¶
-
depth
(self) → int¶
-
destroy
(self, destroyWindow: bool = True, destroySubWindows: bool = True)¶
-
destroyed
¶ destroyed(self, object: QObject = None) [signal]
-
devType
(self) → int¶
-
devicePixelRatio
(self) → int¶
-
devicePixelRatioF
(self) → float¶
-
devicePixelRatioFScale
() → float¶
-
disconnect
(self)¶
-
disconnectNotify
(self, QMetaMethod)¶
-
dragEnterEvent
(self, QDragEnterEvent)¶
-
dragLeaveEvent
(self, QDragLeaveEvent)¶
-
dragMoveEvent
(self, QDragMoveEvent)¶
-
dropEvent
(self, QDropEvent)¶
-
dumpObjectInfo
(self)¶
-
dumpObjectTree
(self)¶
-
dynamicPropertyNames
(self) → List[QByteArray]¶
-
effectiveWinId
(self) → sip.voidptr¶
-
ensurePolished
(self)¶
-
enterEvent
(self, QEvent)¶
-
error
(msg)¶ Display an error dialog with the specified message
Parameters: msg (str) – The message to include in the error dialog
-
event
(self, QEvent) → bool¶
-
eventFilter
(self, QObject, QEvent) → bool¶
-
find
(sip.voidptr) → QWidget¶
-
findChild
(self, type, name: str = '', options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) → QObject¶ findChild(self, Tuple, name: str = ‘’, options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) -> QObject
-
findChildren
(self, type, name: str = '', options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) → List[QObject]¶ findChildren(self, Tuple, name: str = ‘’, options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) -> List[QObject] findChildren(self, type, QRegExp, options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) -> List[QObject] findChildren(self, Tuple, QRegExp, options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) -> List[QObject] findChildren(self, type, QRegularExpression, options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) -> List[QObject] findChildren(self, Tuple, QRegularExpression, options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) -> List[QObject]
-
focusInEvent
(self, QFocusEvent)¶
-
focusNextChild
(self) → bool¶
-
focusNextPrevChild
(self, bool) → bool¶
-
focusOutEvent
(self, QFocusEvent)¶
-
focusPolicy
(self) → Qt.FocusPolicy¶
-
focusPreviousChild
(self) → bool¶
-
focusProxy
(self) → QWidget¶
-
focusWidget
(self) → QWidget¶
-
font
(self) → QFont¶
-
fontInfo
(self) → QFontInfo¶
-
fontMetrics
(self) → QFontMetrics¶
-
foregroundRole
(self) → QPalette.ColorRole¶
-
frameGeometry
(self) → QRect¶
-
frameSize
(self) → QSize¶
-
geometry
(self) → QRect¶
-
getContentsMargins
(self) → Tuple[int, int, int, int]¶
-
getDefaultKeywords
()¶ Get the default keywords for this tab. Note that defaults that exist in mmjag should not be explicitly set here.
-
getNumStructures
()¶
-
getStructureTitleForJobname
()¶ Get the structure title to be used in the job name. If the tab includes multiple structures, then
MULTIPLE_STRUC_JOB_TITLE
should be returned. If no structures have been specified yet, then None should be returned.Returns: The structure title Return type: str or NoneType
-
getStructures
()¶ Get all structures loaded into the tab and their associated Jaguar settings
Returns: A list of tuples. Each tuple represents a single structure and contains: - Entry ID of the structure
- A
schrodinger.structure.Structure
object containing the structure itself - A dictionary of keywords specific to the structure
Return type: list
-
grab
(self, rectangle: QRect = QRect(QPoint(0, 0), QSize(-1, -1))) → QPixmap¶
-
grabGesture
(self, Qt.GestureType, flags: Union[Qt.GestureFlags, Qt.GestureFlag] = Qt.GestureFlags())¶
-
grabKeyboard
(self)¶
-
grabMouse
(self)¶ grabMouse(self, Union[QCursor, Qt.CursorShape])
-
grabShortcut
(self, Union[QKeySequence, QKeySequence.StandardKey, str, int], context: Qt.ShortcutContext = Qt.WindowShortcut) → int¶
-
graphicsEffect
(self) → QGraphicsEffect¶
-
graphicsProxyWidget
(self) → QGraphicsProxyWidget¶
-
hasFocus
(self) → bool¶
-
hasHeightForWidth
(self) → bool¶
-
hasMouseTracking
(self) → bool¶
-
hasTabletTracking
(self) → bool¶
-
height
(self) → int¶
-
heightForWidth
(self, int) → int¶
-
heightMM
(self) → int¶
-
hide
(self)¶
-
hideEvent
(self, QHideEvent)¶
-
inherits
(self, str) → bool¶
-
initPainter
(self, QPainter)¶
-
inputMethodEvent
(self, QInputMethodEvent)¶
-
inputMethodHints
(self) → Qt.InputMethodHints¶
-
inputMethodQuery
(self, Qt.InputMethodQuery) → Any¶
-
insertAction
(self, QAction, QAction)¶
-
insertActions
(self, QAction, Iterable[QAction])¶
-
installEventFilter
(self, QObject)¶
-
isActiveWindow
(self) → bool¶
-
isAncestorOf
(self, QWidget) → bool¶
-
isEnabled
(self) → bool¶
-
isEnabledTo
(self, QWidget) → bool¶
-
isFullScreen
(self) → bool¶
-
isHidden
(self) → bool¶
-
isLeftToRight
(self) → bool¶
-
isMaximized
(self) → bool¶
-
isMinimized
(self) → bool¶
-
isModal
(self) → bool¶
-
isRightToLeft
(self) → bool¶
-
isSignalConnected
(self, QMetaMethod) → bool¶
-
isVisible
(self) → bool¶
-
isVisibleTo
(self, QWidget) → bool¶
-
isWidgetType
(self) → bool¶
-
isWindow
(self) → bool¶
-
isWindowModified
(self) → bool¶
-
isWindowType
(self) → bool¶
-
keyPressEvent
(self, QKeyEvent)¶
-
keyReleaseEvent
(self, QKeyEvent)¶
-
keyboardGrabber
() → QWidget¶
-
killTimer
(self, int)¶
-
layout
(self) → QLayout¶
-
layoutDirection
(self) → Qt.LayoutDirection¶
-
leaveEvent
(self, QEvent)¶
-
loadPerAtomSettings
(jag_input, eid=None, title=None)¶ Restore per-atom tab settings from mmjag keywords. This function should be defined in subclasses for any tabs that contain per-atom settings.
Parameters: - jag_input (schrodinger.application.jaguar.input.JaguarInput) – The Jaguar settings to base the tab settings on
- eid (str) – The entry id of the structure in
jag_input
- title (str) – The title of the structure in
jag_input
-
locale
(self) → QLocale¶
-
logicalDpiX
(self) → int¶
-
logicalDpiY
(self) → int¶
-
lower
(self)¶
-
mapFrom
(self, QWidget, QPoint) → QPoint¶
-
mapFromGlobal
(self, QPoint) → QPoint¶
-
mapFromParent
(self, QPoint) → QPoint¶
-
mapTo
(self, QWidget, QPoint) → QPoint¶
-
mapToGlobal
(self, QPoint) → QPoint¶
-
mapToParent
(self, QPoint) → QPoint¶
-
mask
(self) → QRegion¶
-
maximumHeight
(self) → int¶
-
maximumSize
(self) → QSize¶
-
maximumWidth
(self) → int¶
-
metaObject
(self) → QMetaObject¶
-
metric
(self, QPaintDevice.PaintDeviceMetric) → int¶
-
minimumHeight
(self) → int¶
-
minimumSize
(self) → QSize¶
-
minimumSizeHint
(self) → QSize¶
-
minimumWidth
(self) → int¶
-
mouseDoubleClickEvent
(self, QMouseEvent)¶
-
mouseGrabber
() → QWidget¶
-
mouseMoveEvent
(self, QMouseEvent)¶
-
mousePressEvent
(self, QMouseEvent)¶
-
mouseReleaseEvent
(self, QMouseEvent)¶
-
move
(self, QPoint)¶ move(self, int, int)
-
moveEvent
(self, QMoveEvent)¶
-
moveToThread
(self, QThread)¶
-
nativeEvent
(self, Union[QByteArray, bytes, bytearray], sip.voidptr) → Tuple[bool, int]¶
-
nativeParentWidget
(self) → QWidget¶
-
nextInFocusChain
(self) → QWidget¶
-
normalGeometry
(self) → QRect¶
-
objectName
(self) → str¶
-
objectNameChanged
¶ objectNameChanged(self, str) [signal]
-
overrideWindowFlags
(self, Union[Qt.WindowFlags, Qt.WindowType])¶
-
overrideWindowState
(self, Union[Qt.WindowStates, Qt.WindowState])¶
-
paintEngine
(self) → QPaintEngine¶
-
paintEvent
(self, QPaintEvent)¶
-
paintingActive
(self) → bool¶
-
palette
(self) → QPalette¶
-
parent
(self) → QObject¶
-
parentWidget
(self) → QWidget¶
-
physicalDpiX
(self) → int¶
-
physicalDpiY
(self) → int¶
-
pos
(self) → QPoint¶
-
previousInFocusChain
(self) → QWidget¶
-
projectUpdated
()¶ When the project is updated, update the selected entries table
-
property
(self, str) → Any¶
-
pyqtConfigure
(...)¶ Each keyword argument is either the name of a Qt property or a Qt signal. For properties the property is set to the given value which should be of an appropriate type. For signals the signal is connected to the given value which should be a callable.
-
raise_
(self)¶
-
receivers
(self, PYQT_SIGNAL) → int¶
-
rect
(self) → QRect¶
-
releaseKeyboard
(self)¶
-
releaseMouse
(self)¶
-
releaseShortcut
(self, int)¶
-
removeAction
(self, QAction)¶
-
removeEventFilter
(self, QObject)¶
-
render
(self, QPaintDevice, targetOffset: QPoint = QPoint(), sourceRegion: QRegion = QRegion(), flags: Union[QWidget.RenderFlags, QWidget.RenderFlag] = QWidget.RenderFlags(QWidget.DrawWindowBackground|QWidget.DrawChildren))¶ render(self, QPainter, targetOffset: QPoint = QPoint(), sourceRegion: QRegion = QRegion(), flags: Union[QWidget.RenderFlags, QWidget.RenderFlag] = QWidget.RenderFlags(QWidget.DrawWindowBackground|QWidget.DrawChildren))
-
repaint
(self)¶ repaint(self, int, int, int, int) repaint(self, QRect) repaint(self, QRegion)
-
resize
(self, QSize)¶ resize(self, int, int)
-
resizeEvent
(self, QResizeEvent)¶
-
restoreGeometry
(self, Union[QByteArray, bytes, bytearray]) → bool¶
-
saveGeometry
(self) → QByteArray¶
-
saveSettings
(jag_input, eid)¶ Save tab settings in jaguar handle. It is only used for settings which are not defined using keywords (typically per-atom settings). This function should be defined in subclasses for any tabs that contain per- atom settings.
Parameters: - jag_input (schrodinger.application.jaguar.input.JaguarInput) – The Jaguar handle to store the tab settings in
- eid (str) – The entry id of the structure in
jag_input
-
scroll
(self, int, int)¶ scroll(self, int, int, QRect)
-
sender
(self) → QObject¶
-
senderSignalIndex
(self) → int¶
-
setAcceptDrops
(self, bool)¶
-
setAccessibleDescription
(self, str)¶
-
setAccessibleName
(self, str)¶
-
setAttribute
(self, Qt.WidgetAttribute, on: bool = True)¶
-
setAutoFillBackground
(self, bool)¶
-
setBackgroundRole
(self, QPalette.ColorRole)¶
-
setBaseSize
(self, int, int)¶ setBaseSize(self, QSize)
-
setContentsMargins
(self, int, int, int, int)¶ setContentsMargins(self, QMargins)
-
setContextMenuPolicy
(self, Qt.ContextMenuPolicy)¶
-
setCursor
(self, Union[QCursor, Qt.CursorShape])¶
-
setDisabled
(self, bool)¶
-
setEnabled
(self, bool)¶
-
setFixedHeight
(self, int)¶
-
setFixedSize
(self, QSize)¶ setFixedSize(self, int, int)
-
setFixedWidth
(self, int)¶
-
setFocus
(self)¶ setFocus(self, Qt.FocusReason)
-
setFocusPolicy
(self, Qt.FocusPolicy)¶
-
setFocusProxy
(self, QWidget)¶
-
setFont
(self, QFont)¶
-
setForegroundRole
(self, QPalette.ColorRole)¶
-
setGeometry
(self, QRect)¶ setGeometry(self, int, int, int, int)
-
setGraphicsEffect
(self, QGraphicsEffect)¶
-
setHidden
(self, bool)¶
-
setInputMethodHints
(self, Union[Qt.InputMethodHints, Qt.InputMethodHint])¶
-
setLayout
(self, QLayout)¶
-
setLayoutDirection
(self, Qt.LayoutDirection)¶
-
setLocale
(self, QLocale)¶
-
setMask
(self, QBitmap)¶ setMask(self, QRegion)
-
setMaximumHeight
(self, int)¶
-
setMaximumSize
(self, int, int)¶ setMaximumSize(self, QSize)
-
setMaximumWidth
(self, int)¶
-
setMinimumHeight
(self, int)¶
-
setMinimumSize
(self, int, int)¶ setMinimumSize(self, QSize)
-
setMinimumWidth
(self, int)¶
-
setMouseTracking
(self, bool)¶
-
setObjectName
(self, str)¶
-
setPalette
(self, QPalette)¶
-
setParent
(self, QWidget)¶ setParent(self, QWidget, Union[Qt.WindowFlags, Qt.WindowType])
-
setProperty
(self, str, Any) → bool¶
-
setShortcutAutoRepeat
(self, int, enabled: bool = True)¶
-
setShortcutEnabled
(self, int, enabled: bool = True)¶
-
setSizeIncrement
(self, int, int)¶ setSizeIncrement(self, QSize)
-
setSizePolicy
(self, QSizePolicy)¶ setSizePolicy(self, QSizePolicy.Policy, QSizePolicy.Policy)
-
setStatusTip
(self, str)¶
-
setStyle
(self, QStyle)¶
-
setStyleSheet
(self, str)¶
-
setTabOrder
(QWidget, QWidget)¶
-
setTabletTracking
(self, bool)¶
-
setToolTip
(self, str)¶
-
setToolTipDuration
(self, int)¶
-
setUpdatesEnabled
(self, bool)¶
-
setVisible
(self, bool)¶
-
setWhatsThis
(self, str)¶
-
setWindowFilePath
(self, str)¶
-
setWindowFlag
(self, Qt.WindowType, on: bool = True)¶
-
setWindowFlags
(self, Union[Qt.WindowFlags, Qt.WindowType])¶
-
setWindowIcon
(self, QIcon)¶
-
setWindowIconText
(self, str)¶
-
setWindowModality
(self, Qt.WindowModality)¶
-
setWindowModified
(self, bool)¶
-
setWindowOpacity
(self, float)¶
-
setWindowRole
(self, str)¶
-
setWindowState
(self, Union[Qt.WindowStates, Qt.WindowState])¶
-
setWindowTitle
(self, str)¶
-
setup
()¶ Perform tab specific initialization. This function should be defined in subclasses if initialization is needed.
-
show
(self)¶
-
showEvent
(self, QShowEvent)¶
-
showFullScreen
(self)¶
-
showMaximized
(self)¶
-
showMinimized
(self)¶
-
showNormal
(self)¶
-
signalsBlocked
(self) → bool¶
-
size
(self) → QSize¶
-
sizeHint
(self) → QSize¶
-
sizeIncrement
(self) → QSize¶
-
sizePolicy
(self) → QSizePolicy¶
-
stackUnder
(self, QWidget)¶
-
startTimer
(self, int, timerType: Qt.TimerType = Qt.CoarseTimer) → int¶
-
staticMetaObject
= <PyQt5.QtCore.QMetaObject object>¶
-
statusTip
(self) → str¶
-
strucSourceChanged
¶
-
structureChanged
¶
-
style
(self) → QStyle¶
-
styleSheet
(self) → str¶
-
tabletEvent
(self, QTabletEvent)¶
-
testAttribute
(self, Qt.WidgetAttribute) → bool¶
-
thread
(self) → QThread¶
-
timerEvent
(self, QTimerEvent)¶
-
toolTip
(self) → str¶
-
toolTipDuration
(self) → int¶
-
tr
(self, str, disambiguation: str = None, n: int = -1) → str¶
-
underMouse
(self) → bool¶
-
ungrabGesture
(self, Qt.GestureType)¶
-
unsetCursor
(self)¶
-
unsetLayoutDirection
(self)¶
-
unsetLocale
(self)¶
-
update
(self)¶ update(self, QRect) update(self, QRegion) update(self, int, int, int, int)
-
updateGeometry
(self)¶
-
updateMicroFocus
(self)¶
-
updatesEnabled
(self) → bool¶
-
useFromComboChanged
()¶ Respond to the user changing the structure source (from included to selected or vice versa).
-
usingSelected
()¶ Return True if the tab is set to use selected entries. False if the tab is set to use included entries.
-
validate
()¶ Make sure that the tab settings will allow a job to be run successfully. Note that this validation should not be redundant with that performed in
getMmJagKeywords
. Any tab setting that prevents valid mmjag keywords from being generated should causegetMmJagKeywords
to raise a JaguarSettingError. Any tab setting that allows mmjag keywords to be successfully generated but will result in a job failure should cause avalidate
fail. This function should be defined in subclasses if validation is needed.Returns: If the validation passes, None is returned. If the validation fails, a string that describes the error is returned. Return type: str or NoneType
-
visibleRegion
(self) → QRegion¶
-
warning
(msg)¶ Display a warning dialog with the specified message
Parameters: msg (str) – The message to include in the warning dialog
-
whatsThis
(self) → str¶
-
wheelEvent
(self, QWheelEvent)¶
-
width
(self) → int¶
-
widthMM
(self) → int¶
-
winId
(self) → sip.voidptr¶
-
window
(self) → QWidget¶
-
windowFilePath
(self) → str¶
-
windowFlags
(self) → Qt.WindowFlags¶
-
windowHandle
(self) → QWindow¶
-
windowIcon
(self) → QIcon¶
-
windowIconChanged
¶ windowIconChanged(self, QIcon) [signal]
-
windowIconText
(self) → str¶
-
windowIconTextChanged
¶ windowIconTextChanged(self, str) [signal]
-
windowModality
(self) → Qt.WindowModality¶
-
windowOpacity
(self) → float¶
-
windowRole
(self) → str¶
-
windowState
(self) → Qt.WindowStates¶
-
windowTitle
(self) → str¶
-
windowTitleChanged
¶ windowTitleChanged(self, str) [signal]
-
windowType
(self) → Qt.WindowType¶
-
workspaceChanged
(what_changed)¶ Update the table whenever the workspace changes in case the user changed the charge of a molecule.
Parameters: what_changed (str) – A flag indicating what changed in the workspace
-
x
(self) → int¶
-
y
(self) → int¶
-
-
class
schrodinger.application.jaguar.gui.tabs.input_tab.
InputTabWithSubTabs
(parent, input_selector=None)¶ Bases:
schrodinger.application.jaguar.gui.tabs.input_tab.InputTab
An Input tab with sub-tabs on the bottom. Sub-tabs can be set using
addSubTabs
, which is normally accessed by setting the INPUT_SUB_TABS panel class variable.Variables: - DEFAULT_SUB_TAB_VISIBILITY (bool) – Whether the sub-tabs should be visible by
default. Sub-tab visibility can be toggled at any time using
setSubTabsVisible
, which is connected to the “Atom-Level Settings” button. - subTabChanged (
PyQt5.QtCore.pyqtSignal
) – A signal emitted when the active sub-tab has been changed, or when the sub-tab visibility has been toggled. - addJaguarMarker (
PyQt5.QtCore.pyqtSignal
) –A signal emitted when a workspace marker should be added. Emitted with:
- The list of atoms to add the marker for (list)
- The marker settings (dict)
- The name of the sub-tab that the marker is for (str)
- removeJaguarMarker (
PyQt5.QtCore.pyqtSignal
) –A signal emitted when a workspace marker should be removed. Emitted with:
- The list of atoms to remove the marker for (list)
- The name of the sub-tab that the marker is for (str)
- setMarkerHighlighting (
PyQt5.QtCore.pyqtSignal
) –A signal emitted when the highlighting of a workspace marker should be changed. Emitted with:
- The list of atoms to change the highlighting for (list)
- Whether the marker should be highlighted (True) or unhighlighted (False) (bool)
- The name of the sub-tab that the marker is for (str)
-
UI_MODULES
= (<module 'schrodinger.application.jaguar.gui.ui.input_top_ui' from '/scr/buildbot/savedbuilds/2020-4/NB/build-142/internal/lib/python3.8/site-packages/schrodinger/application/jaguar/gui/ui/input_top_ui.py'>, <module 'schrodinger.application.jaguar.gui.ui.input_std_bottom_ui' from '/scr/buildbot/savedbuilds/2020-4/NB/build-142/internal/lib/python3.8/site-packages/schrodinger/application/jaguar/gui/ui/input_std_bottom_ui.py'>)¶
-
DEFAULT_SUB_TAB_VISIBILITY
= False¶
-
SUB_TAB_NAME
= '%s (%i)'¶
-
subTabChanged
¶
-
addJaguarMarker
¶
-
removeJaguarMarker
¶
-
setMarkerHighlighting
¶
-
addSubTabs
(sub_tab_classes)¶ Add a sub tab for each of the specified classes. Note that this function should be called only once per instance.
Parameters: sub_tab_classes (iterable) – An iterable of schrodinger.application.jaguar. gui.tabs.input_sub_tabs.base_sub_tab.BaseSubTab
sub-classes to be instantiated.
-
getChargeConstraintSubTab
()¶ Get the subtab that holds the charge constraint settings
Return type: schrodinger.application.jaguar.gui.input_sub_tabs. ChargeConstraintsSubTab
Returns: The charge constraint subtab, or None if no such tab exists
-
getBasisSetSubTab
()¶ Get the subtab that holds the by-atom basis set settings
Return type: schrodinger.application.jaguar.gui.input_sub_tabs. BasisSetSubTab
Returns: The by-atom basis set subtab, or None if no such tab exists
-
getSubTab
(sub_tab_class)¶ Get the sub-tab of the specified class
Parameters: sub_tab_class (type) – The class of the sub-tab to retrieve
-
setup
()¶ Perform tab specific initialization. This function should be defined in subclasses if initialization is needed.
-
projectUpdated
()¶ Whenever the project is updated, update the structure titles and the structures shown in the sub tabs.
-
reset
()¶ Reset any structure specific settings in the table. (The non-struture specific settings will be reset via loadSettings())
-
setSubTabsVisible
(visible=None)¶ Set whether the sub-tabs are visible in response to the user clicking on the “Atom-Level Settings” button.
Parameters: visible (bool or NoneType) – Should the sub-tabs be made visible. If not specified, the visibility will be toggled.
-
subTabsVisible
()¶ Are the sub-tabs currently visible?
Returns: True if the sub-tabs are visible. False otherwise. Return type: bool
-
validate
()¶ Make sure that the tab settings will allow a job to be run successfully. Note that this validation should not be redundant with that performed in
getMmJagKeywords
. Any tab setting that prevents valid mmjag keywords from being generated should causegetMmJagKeywords
to raise a JaguarSettingError. Any tab setting that allows mmjag keywords to be successfully generated but will result in a job failure should cause avalidate
fail. This function should be defined in subclasses if validation is needed.Returns: If the validation passes, None is returned. If the validation fails, a string that describes the error is returned. Return type: str or NoneType
-
saveSettings
(jag_input, eid)¶ Save tab settings in jaguar handle. It is only used for settings which are not defined using keywords (typically per-atom settings). This function should be defined in subclasses for any tabs that contain per- atom settings.
Parameters: - jag_input (schrodinger.application.jaguar.input.JaguarInput) – The Jaguar handle to store the tab settings in
- eid (str) – The entry id of the structure in
jag_input
-
loadPerAtomSettings
(jag_input, eid, title)¶ Restore per-atom tab settings from mmjag keywords. This function should be defined in subclasses for any tabs that contain per-atom settings.
Parameters: - jag_input (schrodinger.application.jaguar.input.JaguarInput) – The Jaguar settings to base the tab settings on
- eid (str) – The entry id of the structure in
jag_input
- title (str) – The title of the structure in
jag_input
-
activeSubTab
()¶ Get the active sub tab
Returns: The active sub-tab or None if the sub-tabs are not visible Return type: schrodinger.application.jaguar.gui.input_sub_tabs. base_sub_tab.BaseSubTab
or NoneType
-
activeSubTabName
()¶ Get the name of the active sub-tab
Returns: The name of the active sub-tab or None if the sub-tabs are not visible Return type: str or NoneType
-
activate
()¶ Activate the appropriate sub-tab (if any) when this tab is activated
-
deactivate
()¶ Deactivate the active sub-tab (if any)
-
displayedEntryIds
()¶ Return the entry IDs for all structures that are currently displayed in the input table
Returns: A set of entry ids Return type: set
-
perAtomBasisSetsPresent
()¶ Have any per-atom basis sets been set?
Returns: True if there are per-atom basis sets for any currently selected structures. False otherwise. Return type: bool
-
getCommonBasis
()¶ If all structures use the same basis set and there are no per-atom basis sets, return the basis set name. Otherwise, return None.
Returns: The basis set name or None Return type: str or NoneType
-
theoryChanged
(theory_level)¶ If there is a Charge Constraints sub-tab, disable or enable it when the level of theory changes.
Parameters: theory_level (str) – The current level of theory. Should be one of “DFT”, “HF”, “LMP2” or “Mixed”.
-
useFromComboChanged
()¶ Update the sub-tabs when the user changes the structure source (from included to selected or vice versa).
-
DrawChildren
= 2¶
-
DrawWindowBackground
= 1¶
-
HELP_TOPIC
= 'JAGUAR_INPUT_TAB'¶
-
IgnoreMask
= 4¶
-
MODEL_CLASS
¶ alias of
schrodinger.application.jaguar.gui.input_tab_widgets.InputEntriesModel
-
MULTIPLE_STRUC_JOB_TITLE
= 'batch'¶
-
NAME
= 'Input'¶
-
PROXY_CLASS
¶ alias of
schrodinger.application.jaguar.gui.input_tab_widgets.InputEntriesProxyModel
-
class
PaintDeviceMetric
¶ Bases:
int
-
__init__
= <method-wrapper '__init__' of sip.enumtype object at 0x2e86380>¶
-
-
PdmDepth
= 6¶
-
PdmDevicePixelRatio
= 11¶
-
PdmDevicePixelRatioScaled
= 12¶
-
PdmDpiX
= 7¶
-
PdmDpiY
= 8¶
-
PdmHeight
= 2¶
-
PdmHeightMM
= 4¶
-
PdmNumColors
= 5¶
-
PdmPhysicalDpiX
= 9¶
-
PdmPhysicalDpiY
= 10¶
-
PdmWidth
= 1¶
-
PdmWidthMM
= 3¶
-
class
RenderFlag
¶ Bases:
int
-
__init__
= <method-wrapper '__init__' of sip.enumtype object at 0x30eb450>¶
-
-
class
RenderFlags
¶ Bases:
sip.simplewrapper
QWidget.RenderFlags(Union[QWidget.RenderFlags, QWidget.RenderFlag]) QWidget.RenderFlags(QWidget.RenderFlags)
-
__init__
¶ Initialize self. See help(type(self)) for accurate signature.
-
-
VIEW_CLASS
¶ alias of
schrodinger.application.jaguar.gui.input_tab_widgets.InputEntriesView
-
__init__
(parent, input_selector=None)¶ Perform common tab initialization. All tab specific initialization should go in setup().
Parameters: - parent (PyQt5.QtWidgets.QWidget) – The Qt parent widget
- input_selector (schrodinger.ui.qt.input_selector.InputSelector) – The panel’s input selector widget, if available.
-
acceptDrops
(self) → bool¶
-
accessibleDescription
(self) → str¶
-
accessibleName
(self) → str¶
-
actionEvent
(self, QActionEvent)¶
-
actions
(self) → List[QAction]¶
-
activateWindow
(self)¶
-
addAction
(self, QAction)¶
-
addActions
(self, Iterable[QAction])¶
-
adjustSize
(self)¶
-
autoFillBackground
(self) → bool¶
-
backgroundRole
(self) → QPalette.ColorRole¶
-
baseSize
(self) → QSize¶
-
basis_changed
¶
-
blockSignals
(self, bool) → bool¶
-
changeEvent
(self, QEvent)¶
-
chargedStrucsPresent
()¶ Determine if the user has specified any molecular charges
Returns: True if the user has specified a molecular charge for any molecule. False otherwise. Return type: bool
-
childAt
(self, QPoint) → QWidget¶ childAt(self, int, int) -> QWidget
-
childEvent
(self, QChildEvent)¶
-
children
(self) → List[QObject]¶
-
childrenRect
(self) → QRect¶
-
childrenRegion
(self) → QRegion¶
-
clearFocus
(self)¶
-
clearMask
(self)¶
-
close
(self) → bool¶
-
closeEvent
(self, QCloseEvent)¶
-
colorCount
(self) → int¶
-
connectNotify
(self, QMetaMethod)¶
-
contentsMargins
(self) → QMargins¶
-
contentsRect
(self) → QRect¶
-
contextMenuEvent
(self, QContextMenuEvent)¶
-
contextMenuPolicy
(self) → Qt.ContextMenuPolicy¶
-
create
(self, window: sip.voidptr = 0, initializeWindow: bool = True, destroyOldWindow: bool = True)¶
-
createWindowContainer
(QWindow, parent: QWidget = None, flags: Union[Qt.WindowFlags, Qt.WindowType] = 0) → QWidget¶
-
cursor
(self) → QCursor¶
-
customContextMenuRequested
¶ customContextMenuRequested(self, QPoint) [signal]
-
customEvent
(self, QEvent)¶
-
deleteLater
(self)¶
-
depth
(self) → int¶
-
destroy
(self, destroyWindow: bool = True, destroySubWindows: bool = True)¶
-
destroyed
¶ destroyed(self, object: QObject = None) [signal]
-
devType
(self) → int¶
-
devicePixelRatio
(self) → int¶
-
devicePixelRatioF
(self) → float¶
-
devicePixelRatioFScale
() → float¶
-
disconnect
(self)¶
-
disconnectNotify
(self, QMetaMethod)¶
-
dragEnterEvent
(self, QDragEnterEvent)¶
-
dragLeaveEvent
(self, QDragLeaveEvent)¶
-
dragMoveEvent
(self, QDragMoveEvent)¶
-
dropEvent
(self, QDropEvent)¶
-
dumpObjectInfo
(self)¶
-
dumpObjectTree
(self)¶
-
dynamicPropertyNames
(self) → List[QByteArray]¶
-
effectiveWinId
(self) → sip.voidptr¶
-
ensurePolished
(self)¶
-
enterEvent
(self, QEvent)¶
-
error
(msg)¶ Display an error dialog with the specified message
Parameters: msg (str) – The message to include in the error dialog
-
event
(self, QEvent) → bool¶
-
eventFilter
(self, QObject, QEvent) → bool¶
-
find
(sip.voidptr) → QWidget¶
-
findChild
(self, type, name: str = '', options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) → QObject¶ findChild(self, Tuple, name: str = ‘’, options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) -> QObject
-
findChildren
(self, type, name: str = '', options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) → List[QObject]¶ findChildren(self, Tuple, name: str = ‘’, options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) -> List[QObject] findChildren(self, type, QRegExp, options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) -> List[QObject] findChildren(self, Tuple, QRegExp, options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) -> List[QObject] findChildren(self, type, QRegularExpression, options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) -> List[QObject] findChildren(self, Tuple, QRegularExpression, options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) -> List[QObject]
-
focusInEvent
(self, QFocusEvent)¶
-
focusNextChild
(self) → bool¶
-
focusNextPrevChild
(self, bool) → bool¶
-
focusOutEvent
(self, QFocusEvent)¶
-
focusPolicy
(self) → Qt.FocusPolicy¶
-
focusPreviousChild
(self) → bool¶
-
focusProxy
(self) → QWidget¶
-
focusWidget
(self) → QWidget¶
-
font
(self) → QFont¶
-
fontInfo
(self) → QFontInfo¶
-
fontMetrics
(self) → QFontMetrics¶
-
foregroundRole
(self) → QPalette.ColorRole¶
-
frameGeometry
(self) → QRect¶
-
frameSize
(self) → QSize¶
-
geometry
(self) → QRect¶
-
getAllUsedTheoryLevels
()¶ Returns: A tuple of all theory levels used Return type: tuple
-
getBasis
(mixed_name='Mixed')¶ Get the currently selected basis. If more than one basis set is specified,
mixed_name
will be returned. If the tab does not allow for specifying multiple basis sets, then this argument may be ignored.Parameters: mixed_name (str) – The name to return if more than one basis set is specified Returns: The currently selected basis Return type: str
-
getBasisForEid
(eid, per_atom_name)¶ Get the basis set for the specified entry id. If there are per-atom basis sets specified for the structure, the
per_atom_name
will be returned.Parameters: - eid (str) – The entry id
- per_atom_name (str) – The name to return if per-atom basis sets are specified
Returns: The basis set name, or
per_atom_name
if per-atom basis sets are specifiedReturn type: Basis
or str
-
getCommonFunctional
()¶ Returns: If all entries use DFT and have the same functional set, return the functional. Otherwise return None. Return type: str or None
-
getCommonMethod
()¶ If all structures use the same method, return the method name. Otherwise, return None.
Returns: The method name or None Return type: str or NoneType
-
getCommonTheoryLevel
()¶ Returns: If all current methods are of the same theory level, return the theory level. Otherwise return None. Return type: str or None
-
getContentsMargins
(self) → Tuple[int, int, int, int]¶
-
getDefaultKeywords
()¶ The mmjag default basis set is “”, which would cause a warning, so we set the default basis. Additionally, the mmjag default DFT functional name is “”, which would cause a HF level of theory. Instead, set a default functional of B3LYP-D3.
Returns: A keyword dictionary with the default basis set and functional. Return type: dict
-
getFunctional
(cur_struc=None)¶ Get the current DFT functional.
Parameters: cur_struc (input_tab_widgets.ProjEntryTuple) – Current structure to get functional for. If not specified, functional will be returned based on default theory setting. Returns: The current DFT functional Return type: str or None
-
getMethod
()¶ Get the current method.
Returns: The current method Return type: str
-
getMethodForEid
(eid)¶ Get the method for the specified entry ID.
Parameters: eid – Entry ID to get method of. type eid: int
Returns: Method for this entry ID. Return type: str
-
getMmJagKeywords
()¶ Return all keywords that should be put into the mmjag handle. This function should be defined in subclasses.
Returns: All keywords that should be put into the mmjag handle Return type: dict Raises: schrodinger.application.jaguar.gui.utils.JaguarSettingError – If any settings are invalid.
-
getNumStructures
()¶
-
getStructureTitleForJobname
()¶ Get the structure title to be used in the job name. If the tab includes multiple structures, then
MULTIPLE_STRUC_JOB_TITLE
should be returned. If no structures have been specified yet, then None should be returned.Returns: The structure title Return type: str or NoneType
-
getStructures
()¶ Get all structures loaded into the tab and their associated Jaguar settings
Returns: A list of tuples. Each tuple represents a single structure and contains: - Entry ID of the structure
- A
schrodinger.structure.Structure
object containing the structure itself - A dictionary of keywords specific to the structure
Return type: list
-
getTheoryLevel
()¶ Get the current theory level
Returns: The current theory level. Return type: str
-
getTheoryLevelForEid
(eid)¶ Get the theory level for the specified entry ID.
Parameters: eid – Entry ID to get theory level of. type eid: int
Returns: Theory level for this entry ID. Return type: str
-
grab
(self, rectangle: QRect = QRect(QPoint(0, 0), QSize(-1, -1))) → QPixmap¶
-
grabGesture
(self, Qt.GestureType, flags: Union[Qt.GestureFlags, Qt.GestureFlag] = Qt.GestureFlags())¶
-
grabKeyboard
(self)¶
-
grabMouse
(self)¶ grabMouse(self, Union[QCursor, Qt.CursorShape])
-
grabShortcut
(self, Union[QKeySequence, QKeySequence.StandardKey, str, int], context: Qt.ShortcutContext = Qt.WindowShortcut) → int¶
-
graphicsEffect
(self) → QGraphicsEffect¶
-
graphicsProxyWidget
(self) → QGraphicsProxyWidget¶
-
hasFocus
(self) → bool¶
-
hasHeightForWidth
(self) → bool¶
-
hasMouseTracking
(self) → bool¶
-
hasTabletTracking
(self) → bool¶
-
height
(self) → int¶
-
heightForWidth
(self, int) → int¶
-
heightMM
(self) → int¶
-
hide
(self)¶
-
hideEvent
(self, QHideEvent)¶
-
inherits
(self, str) → bool¶
-
initPainter
(self, QPainter)¶
-
inputMethodEvent
(self, QInputMethodEvent)¶
-
inputMethodHints
(self) → Qt.InputMethodHints¶
-
inputMethodQuery
(self, Qt.InputMethodQuery) → Any¶
-
insertAction
(self, QAction, QAction)¶
-
insertActions
(self, QAction, Iterable[QAction])¶
-
installEventFilter
(self, QObject)¶
-
isActiveWindow
(self) → bool¶
-
isAncestorOf
(self, QWidget) → bool¶
-
isEnabled
(self) → bool¶
-
isEnabledTo
(self, QWidget) → bool¶
-
isFullScreen
(self) → bool¶
-
isHidden
(self) → bool¶
-
isLeftToRight
(self) → bool¶
-
isMaximized
(self) → bool¶
-
isMinimized
(self) → bool¶
-
isModal
(self) → bool¶
-
isRightToLeft
(self) → bool¶
-
isSignalConnected
(self, QMetaMethod) → bool¶
-
isVisible
(self) → bool¶
-
isVisibleTo
(self, QWidget) → bool¶
-
isWidgetType
(self) → bool¶
-
isWindow
(self) → bool¶
-
isWindowModified
(self) → bool¶
-
isWindowType
(self) → bool¶
-
keyPressEvent
(self, QKeyEvent)¶
-
keyReleaseEvent
(self, QKeyEvent)¶
-
keyboardGrabber
() → QWidget¶
-
killTimer
(self, int)¶
-
layout
(self) → QLayout¶
-
layoutDirection
(self) → Qt.LayoutDirection¶
-
leaveEvent
(self, QEvent)¶
-
loadSettings
(jag_input)¶ Restore tab settings from mmjag keywords. This function should be defined in subclasses.
Parameters: jag_input (schrodinger.application.jaguar.input.JaguarInput) – The Jaguar settings to base the tab settings on
-
locale
(self) → QLocale¶
-
logicalDpiX
(self) → int¶
-
logicalDpiY
(self) → int¶
-
lower
(self)¶
-
mapFrom
(self, QWidget, QPoint) → QPoint¶
-
mapFromGlobal
(self, QPoint) → QPoint¶
-
mapFromParent
(self, QPoint) → QPoint¶
-
mapTo
(self, QWidget, QPoint) → QPoint¶
-
mapToGlobal
(self, QPoint) → QPoint¶
-
mapToParent
(self, QPoint) → QPoint¶
-
mask
(self) → QRegion¶
-
maximumHeight
(self) → int¶
-
maximumSize
(self) → QSize¶
-
maximumWidth
(self) → int¶
-
metaObject
(self) → QMetaObject¶
-
method_changed
¶
-
metric
(self, QPaintDevice.PaintDeviceMetric) → int¶
-
minimumHeight
(self) → int¶
-
minimumSize
(self) → QSize¶
-
minimumSizeHint
(self) → QSize¶
-
minimumWidth
(self) → int¶
-
mouseDoubleClickEvent
(self, QMouseEvent)¶
-
mouseGrabber
() → QWidget¶
-
mouseMoveEvent
(self, QMouseEvent)¶
-
mousePressEvent
(self, QMouseEvent)¶
-
mouseReleaseEvent
(self, QMouseEvent)¶
-
move
(self, QPoint)¶ move(self, int, int)
-
moveEvent
(self, QMoveEvent)¶
-
moveToThread
(self, QThread)¶
-
nativeEvent
(self, Union[QByteArray, bytes, bytearray], sip.voidptr) → Tuple[bool, int]¶
-
nativeParentWidget
(self) → QWidget¶
-
nextInFocusChain
(self) → QWidget¶
-
normalGeometry
(self) → QRect¶
-
objectName
(self) → str¶
-
objectNameChanged
¶ objectNameChanged(self, str) [signal]
-
overrideWindowFlags
(self, Union[Qt.WindowFlags, Qt.WindowType])¶
-
overrideWindowState
(self, Union[Qt.WindowStates, Qt.WindowState])¶
-
paintEngine
(self) → QPaintEngine¶
-
paintEvent
(self, QPaintEvent)¶
-
paintingActive
(self) → bool¶
-
palette
(self) → QPalette¶
-
parent
(self) → QObject¶
-
parentWidget
(self) → QWidget¶
-
physicalDpiX
(self) → int¶
-
physicalDpiY
(self) → int¶
-
pos
(self) → QPoint¶
-
previousInFocusChain
(self) → QWidget¶
-
property
(self, str) → Any¶
-
pyqtConfigure
(...)¶ Each keyword argument is either the name of a Qt property or a Qt signal. For properties the property is set to the given value which should be of an appropriate type. For signals the signal is connected to the given value which should be a callable.
-
raise_
(self)¶
-
receivers
(self, PYQT_SIGNAL) → int¶
-
rect
(self) → QRect¶
-
releaseKeyboard
(self)¶
-
releaseMouse
(self)¶
-
releaseShortcut
(self, int)¶
-
removeAction
(self, QAction)¶
-
removeEventFilter
(self, QObject)¶
-
render
(self, QPaintDevice, targetOffset: QPoint = QPoint(), sourceRegion: QRegion = QRegion(), flags: Union[QWidget.RenderFlags, QWidget.RenderFlag] = QWidget.RenderFlags(QWidget.DrawWindowBackground|QWidget.DrawChildren))¶ render(self, QPainter, targetOffset: QPoint = QPoint(), sourceRegion: QRegion = QRegion(), flags: Union[QWidget.RenderFlags, QWidget.RenderFlag] = QWidget.RenderFlags(QWidget.DrawWindowBackground|QWidget.DrawChildren))
-
repaint
(self)¶ repaint(self, int, int, int, int) repaint(self, QRect) repaint(self, QRegion)
-
resize
(self, QSize)¶ resize(self, int, int)
-
resizeEvent
(self, QResizeEvent)¶
-
restoreGeometry
(self, Union[QByteArray, bytes, bytearray]) → bool¶
-
saveGeometry
(self) → QByteArray¶
-
scroll
(self, int, int)¶ scroll(self, int, int, QRect)
-
sender
(self) → QObject¶
-
senderSignalIndex
(self) → int¶
-
setAcceptDrops
(self, bool)¶
-
setAccessibleDescription
(self, str)¶
-
setAccessibleName
(self, str)¶
-
setAttribute
(self, Qt.WidgetAttribute, on: bool = True)¶
-
setAutoFillBackground
(self, bool)¶
-
setBackgroundRole
(self, QPalette.ColorRole)¶
-
setBaseSize
(self, int, int)¶ setBaseSize(self, QSize)
-
setContentsMargins
(self, int, int, int, int)¶ setContentsMargins(self, QMargins)
-
setContextMenuPolicy
(self, Qt.ContextMenuPolicy)¶
-
setCursor
(self, Union[QCursor, Qt.CursorShape])¶
-
setDisabled
(self, bool)¶
-
setEnabled
(self, bool)¶
-
setFixedHeight
(self, int)¶
-
setFixedSize
(self, QSize)¶ setFixedSize(self, int, int)
-
setFixedWidth
(self, int)¶
-
setFocus
(self)¶ setFocus(self, Qt.FocusReason)
-
setFocusPolicy
(self, Qt.FocusPolicy)¶
-
setFocusProxy
(self, QWidget)¶
-
setFont
(self, QFont)¶
-
setForegroundRole
(self, QPalette.ColorRole)¶
-
setGeometry
(self, QRect)¶ setGeometry(self, int, int, int, int)
-
setGraphicsEffect
(self, QGraphicsEffect)¶
-
setHidden
(self, bool)¶
-
setInputMethodHints
(self, Union[Qt.InputMethodHints, Qt.InputMethodHint])¶
-
setLayout
(self, QLayout)¶
-
setLayoutDirection
(self, Qt.LayoutDirection)¶
-
setLocale
(self, QLocale)¶
-
setMask
(self, QBitmap)¶ setMask(self, QRegion)
-
setMaximumHeight
(self, int)¶
-
setMaximumSize
(self, int, int)¶ setMaximumSize(self, QSize)
-
setMaximumWidth
(self, int)¶
-
setMinimumHeight
(self, int)¶
-
setMinimumSize
(self, int, int)¶ setMinimumSize(self, QSize)
-
setMinimumWidth
(self, int)¶
-
setMouseTracking
(self, bool)¶
-
setObjectName
(self, str)¶
-
setPalette
(self, QPalette)¶
-
setParent
(self, QWidget)¶ setParent(self, QWidget, Union[Qt.WindowFlags, Qt.WindowType])
-
setProperty
(self, str, Any) → bool¶
-
setShortcutAutoRepeat
(self, int, enabled: bool = True)¶
-
setShortcutEnabled
(self, int, enabled: bool = True)¶
-
setSizeIncrement
(self, int, int)¶ setSizeIncrement(self, QSize)
-
setSizePolicy
(self, QSizePolicy)¶ setSizePolicy(self, QSizePolicy.Policy, QSizePolicy.Policy)
-
setStatusTip
(self, str)¶
-
setStyle
(self, QStyle)¶
-
setStyleSheet
(self, str)¶
-
setTabOrder
(QWidget, QWidget)¶
-
setTabletTracking
(self, bool)¶
-
setToolTip
(self, str)¶
-
setToolTipDuration
(self, int)¶
-
setUpdatesEnabled
(self, bool)¶
-
setVisible
(self, bool)¶
-
setWhatsThis
(self, str)¶
-
setWindowFilePath
(self, str)¶
-
setWindowFlag
(self, Qt.WindowType, on: bool = True)¶
-
setWindowFlags
(self, Union[Qt.WindowFlags, Qt.WindowType])¶
-
setWindowIcon
(self, QIcon)¶
-
setWindowIconText
(self, str)¶
-
setWindowModality
(self, Qt.WindowModality)¶
-
setWindowModified
(self, bool)¶
-
setWindowOpacity
(self, float)¶
-
setWindowRole
(self, str)¶
-
setWindowState
(self, Union[Qt.WindowStates, Qt.WindowState])¶
-
setWindowTitle
(self, str)¶
-
show
(self)¶
-
showEvent
(self, QShowEvent)¶
-
showFullScreen
(self)¶
-
showMaximized
(self)¶
-
showMinimized
(self)¶
-
showNormal
(self)¶
-
signalsBlocked
(self) → bool¶
-
size
(self) → QSize¶
-
sizeHint
(self) → QSize¶
-
sizeIncrement
(self) → QSize¶
-
sizePolicy
(self) → QSizePolicy¶
-
stackUnder
(self, QWidget)¶
-
startTimer
(self, int, timerType: Qt.TimerType = Qt.CoarseTimer) → int¶
-
staticMetaObject
= <PyQt5.QtCore.QMetaObject object>¶
-
statusTip
(self) → str¶
-
strucSourceChanged
¶
-
structureChanged
¶
-
style
(self) → QStyle¶
-
styleSheet
(self) → str¶
-
tabletEvent
(self, QTabletEvent)¶
-
testAttribute
(self, Qt.WidgetAttribute) → bool¶
-
thread
(self) → QThread¶
-
timerEvent
(self, QTimerEvent)¶
-
toolTip
(self) → str¶
-
toolTipDuration
(self) → int¶
-
tr
(self, str, disambiguation: str = None, n: int = -1) → str¶
-
underMouse
(self) → bool¶
-
ungrabGesture
(self, Qt.GestureType)¶
-
unsetCursor
(self)¶
-
unsetLayoutDirection
(self)¶
-
unsetLocale
(self)¶
-
update
(self)¶ update(self, QRect) update(self, QRegion) update(self, int, int, int, int)
-
updateGeometry
(self)¶
-
updateMicroFocus
(self)¶
-
updatesEnabled
(self) → bool¶
-
usingSelected
()¶ Return True if the tab is set to use selected entries. False if the tab is set to use included entries.
-
visibleRegion
(self) → QRegion¶
-
warning
(msg)¶ Display a warning dialog with the specified message
Parameters: msg (str) – The message to include in the warning dialog
-
whatsThis
(self) → str¶
-
wheelEvent
(self, QWheelEvent)¶
-
width
(self) → int¶
-
widthMM
(self) → int¶
-
winId
(self) → sip.voidptr¶
-
window
(self) → QWidget¶
-
windowFilePath
(self) → str¶
-
windowFlags
(self) → Qt.WindowFlags¶
-
windowHandle
(self) → QWindow¶
-
windowIcon
(self) → QIcon¶
-
windowIconChanged
¶ windowIconChanged(self, QIcon) [signal]
-
windowIconText
(self) → str¶
-
windowIconTextChanged
¶ windowIconTextChanged(self, str) [signal]
-
windowModality
(self) → Qt.WindowModality¶
-
windowOpacity
(self) → float¶
-
windowRole
(self) → str¶
-
windowState
(self) → Qt.WindowStates¶
-
windowTitle
(self) → str¶
-
windowTitleChanged
¶ windowTitleChanged(self, str) [signal]
-
windowType
(self) → Qt.WindowType¶
-
workspaceChanged
(what_changed)¶ Update the table whenever the workspace changes in case the user changed the charge of a molecule.
Parameters: what_changed (str) – A flag indicating what changed in the workspace
-
x
(self) → int¶
-
y
(self) → int¶
- DEFAULT_SUB_TAB_VISIBILITY (bool) – Whether the sub-tabs should be visible by
default. Sub-tab visibility can be toggled at any time using