schrodinger.application.jaguar.gui.tabs.input_tab module

class schrodinger.application.jaguar.gui.tabs.input_tab.InputTabBase(parent, input_selector=None)[source]

Bases: schrodinger.application.jaguar.gui.tabs.base_tab.ProvidesStructuresMixin, schrodinger.application.jaguar.gui.tabs.base_tab.BaseTab

A tab for specifying settings for the structures currently selected in the project table. Note that this class is not intended to be directly instantiated. Instead, the InputTab or InputTabPka classes should be used.

Variables
  • MODEL_CLASS (schrodinger.application.jaguar.gui.input_tab_widgets. SelectedEntriesModel) – The class to use for the table model

  • PROXY_CLASS (schrodinger.application.jaguar.gui.input_tab_widgets. SelectedEntriesProxyModel) – The class to use for the table proxy model

  • VIEW_CLASS (schrodinger.application.jaguar.gui.input_tab_widgets. SelectedEntriesView) – The class to use for the table view

  • strucSourceChanged (QtCore.pyqtSignal) – A signal emitted when the structure source changes from included to selected or vice versa.

strucSourceChanged
NAME = 'Input'
MODEL_CLASS

alias of schrodinger.application.jaguar.gui.input_tab_widgets.InputEntriesModel

PROXY_CLASS

alias of schrodinger.application.jaguar.gui.input_tab_widgets.InputEntriesProxyModel

VIEW_CLASS

alias of schrodinger.application.jaguar.gui.input_tab_widgets.InputEntriesView

setup()[source]

Perform tab specific initialization. This function should be defined in subclasses if initialization is needed.

projectUpdated()[source]

When the project is updated, update the selected entries table

workspaceChanged(what_changed)[source]

Update the table whenever the workspace changes in case the user changed the charge of a molecule.

Parameters

what_changed (str) – A flag indicating what changed in the workspace

loadSettings(jag_input)[source]

Restore tab settings from mmjag keywords. This function should be defined in subclasses.

Parameters

jag_input (schrodinger.application.jaguar.input.JaguarInput) – The Jaguar settings to base the tab settings on

validate()[source]

Make sure that the tab settings will allow a job to be run successfully. Note that this validation should not be redundant with that performed in getMmJagKeywords. Any tab setting that prevents valid mmjag keywords from being generated should cause getMmJagKeywords to raise a JaguarSettingError. Any tab setting that allows mmjag keywords to be successfully generated but will result in a job failure should cause a validate fail. This function should be defined in subclasses if validation is needed.

Returns

If the validation passes, None is returned. If the validation fails, a string that describes the error is returned.

Return type

str or NoneType

getStructures()[source]

Get all structures loaded into the tab and their associated Jaguar settings

Returns

A list of tuples. Each tuple represents a single structure and contains:

Return type

list

getNumStructures()[source]
getStructureTitleForJobname()[source]

Get the structure title to be used in the job name. If the tab includes multiple structures, then MULTIPLE_STRUC_JOB_TITLE should be returned. If no structures have been specified yet, then None should be returned.

Returns

The structure title

Return type

str or NoneType

reset()[source]

Reset any structure specific settings in the table. (The non-struture specific settings will be reset via loadSettings())

useFromComboChanged()[source]

Respond to the user changing the structure source (from included to selected or vice versa).

usingSelected()[source]

Return True if the tab is set to use selected entries. False if the tab is set to use included entries.

DrawChildren = 2
DrawWindowBackground = 1
HELP_TOPIC = ''
IgnoreMask = 4
MULTIPLE_STRUC_JOB_TITLE = 'batch'
class PaintDeviceMetric

Bases: int

PdmDepth = 6
PdmDevicePixelRatio = 11
PdmDevicePixelRatioScaled = 12
PdmDpiX = 7
PdmDpiY = 8
PdmHeight = 2
PdmHeightMM = 4
PdmNumColors = 5
PdmPhysicalDpiX = 9
PdmPhysicalDpiY = 10
PdmWidth = 1
PdmWidthMM = 3
class RenderFlag

Bases: int

class RenderFlags

Bases: sip.simplewrapper

QWidget.RenderFlags(Union[QWidget.RenderFlags, QWidget.RenderFlag]) QWidget.RenderFlags(QWidget.RenderFlags)

__init__(*args, **kwargs)

Initialize self. See help(type(self)) for accurate signature.

UI_MODULES = None
__init__(parent, input_selector=None)

Perform common tab initialization. All tab specific initialization should go in setup().

Parameters
acceptDrops(self) → bool
accessibleDescription(self) → str
accessibleName(self) → str
actionEvent(self, QActionEvent)
actions(self) → List[QAction]
activate()

This function will be called whenever the user selects this tab. Subclasses can override it if necessary to, e.g., activate picking.

activateWindow(self)
addAction(self, QAction)
addActions(self, Iterable[QAction])
adjustSize(self)
autoFillBackground(self) → bool
backgroundRole(self) → QPalette.ColorRole
baseSize(self) → QSize
blockSignals(self, bool) → bool
changeEvent(self, QEvent)
childAt(self, QPoint) → QWidget

childAt(self, int, int) -> QWidget

childEvent(self, QChildEvent)
children(self) → List[QObject]
childrenRect(self) → QRect
childrenRegion(self) → QRegion
clearFocus(self)
clearMask(self)
close(self) → bool
closeEvent(self, QCloseEvent)
colorCount(self) → int
connectNotify(self, QMetaMethod)
contentsMargins(self) → QMargins
contentsRect(self) → QRect
contextMenuEvent(self, QContextMenuEvent)
contextMenuPolicy(self) → Qt.ContextMenuPolicy
create(self, window: sip.voidptr = 0, initializeWindow: bool = True, destroyOldWindow: bool = True)
createWindowContainer(QWindow, parent: QWidget = None, flags: Union[Qt.WindowFlags, Qt.WindowType] = 0) → QWidget
cursor(self) → QCursor
customContextMenuRequested

customContextMenuRequested(self, QPoint) [signal]

customEvent(self, QEvent)
deactivate()

This function will be called whenever the user selects a different tab. Subclasses can override it if necessary to, e.g., deactivate picking.

deleteLater(self)
depth(self) → int
destroy(self, destroyWindow: bool = True, destroySubWindows: bool = True)
destroyed

destroyed(self, object: QObject = None) [signal]

devType(self) → int
devicePixelRatio(self) → int
devicePixelRatioF(self) → float
devicePixelRatioFScale() → float
disconnect(self)
disconnectNotify(self, QMetaMethod)
dragEnterEvent(self, QDragEnterEvent)
dragLeaveEvent(self, QDragLeaveEvent)
dragMoveEvent(self, QDragMoveEvent)
dropEvent(self, QDropEvent)
dumpObjectInfo(self)
dumpObjectTree(self)
dynamicPropertyNames(self) → List[QByteArray]
effectiveWinId(self) → sip.voidptr
ensurePolished(self)
enterEvent(self, QEvent)
error(msg)

Display an error dialog with the specified message

Parameters

msg (str) – The message to include in the error dialog

event(self, QEvent) → bool
eventFilter(self, QObject, QEvent) → bool
find(sip.voidptr) → QWidget
findChild(self, type, name: str = '', options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) → QObject

findChild(self, Tuple, name: str = ‘’, options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) -> QObject

findChildren(self, type, name: str = '', options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, Tuple, name: str = ‘’, options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) -> List[QObject] findChildren(self, type, QRegExp, options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) -> List[QObject] findChildren(self, Tuple, QRegExp, options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) -> List[QObject] findChildren(self, type, QRegularExpression, options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) -> List[QObject] findChildren(self, Tuple, QRegularExpression, options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) -> List[QObject]

focusInEvent(self, QFocusEvent)
focusNextChild(self) → bool
focusNextPrevChild(self, bool) → bool
focusOutEvent(self, QFocusEvent)
focusPolicy(self) → Qt.FocusPolicy
focusPreviousChild(self) → bool
focusProxy(self) → QWidget
focusWidget(self) → QWidget
font(self) → QFont
fontInfo(self) → QFontInfo
fontMetrics(self) → QFontMetrics
foregroundRole(self) → QPalette.ColorRole
frameGeometry(self) → QRect
frameSize(self) → QSize
geometry(self) → QRect
getContentsMargins(self) → Tuple[int, int, int, int]
getDefaultKeywords()

Get the default keywords for this tab. Note that defaults that exist in mmjag should not be explicitly set here.

getMmJagKeywords()

Return all keywords that should be put into the mmjag handle. This function should be defined in subclasses.

Returns

All keywords that should be put into the mmjag handle

Return type

dict

Raises

schrodinger.application.jaguar.gui.utils.JaguarSettingError – If any settings are invalid.

grab(self, rectangle: QRect = QRect(QPoint(0, 0), QSize(- 1, - 1))) → QPixmap
grabGesture(self, Qt.GestureType, flags: Union[Qt.GestureFlags, Qt.GestureFlag] = Qt.GestureFlags())
grabKeyboard(self)
grabMouse(self)

grabMouse(self, Union[QCursor, Qt.CursorShape])

grabShortcut(self, Union[QKeySequence, QKeySequence.StandardKey, str, int], context: Qt.ShortcutContext = Qt.WindowShortcut) → int
graphicsEffect(self) → QGraphicsEffect
graphicsProxyWidget(self) → QGraphicsProxyWidget
hasFocus(self) → bool
hasHeightForWidth(self) → bool
hasMouseTracking(self) → bool
hasTabletTracking(self) → bool
height(self) → int
heightForWidth(self, int) → int
heightMM(self) → int
hide(self)
hideEvent(self, QHideEvent)
inherits(self, str) → bool
initPainter(self, QPainter)
inputMethodEvent(self, QInputMethodEvent)
inputMethodHints(self) → Qt.InputMethodHints
inputMethodQuery(self, Qt.InputMethodQuery) → Any
InputTabBase.insertAction(self, QAction, QAction)
insertActions(self, QAction, Iterable[QAction])
installEventFilter(self, QObject)
isActiveWindow(self) → bool
isAncestorOf(self, QWidget) → bool
isEnabled(self) → bool
isEnabledTo(self, QWidget) → bool
isFullScreen(self) → bool
isHidden(self) → bool
isLeftToRight(self) → bool
isMaximized(self) → bool
isMinimized(self) → bool
isModal(self) → bool
isRightToLeft(self) → bool
isSignalConnected(self, QMetaMethod) → bool
isVisible(self) → bool
isVisibleTo(self, QWidget) → bool
isWidgetType(self) → bool
isWindow(self) → bool
isWindowModified(self) → bool
isWindowType(self) → bool
keyPressEvent(self, QKeyEvent)
keyReleaseEvent(self, QKeyEvent)
keyboardGrabber() → QWidget
killTimer(self, int)
layout(self) → QLayout
layoutDirection(self) → Qt.LayoutDirection
leaveEvent(self, QEvent)
loadPerAtomSettings(jag_input, eid=None, title=None)

Restore per-atom tab settings from mmjag keywords. This function should be defined in subclasses for any tabs that contain per-atom settings.

Parameters
locale(self) → QLocale
logicalDpiX(self) → int
logicalDpiY(self) → int
lower(self)
mapFrom(self, QWidget, QPoint) → QPoint
mapFromGlobal(self, QPoint) → QPoint
mapFromParent(self, QPoint) → QPoint
mapTo(self, QWidget, QPoint) → QPoint
mapToGlobal(self, QPoint) → QPoint
mapToParent(self, QPoint) → QPoint
mask(self) → QRegion
maximumHeight(self) → int
maximumSize(self) → QSize
maximumWidth(self) → int
metaObject(self) → QMetaObject
metric(self, QPaintDevice.PaintDeviceMetric) → int
minimumHeight(self) → int
minimumSize(self) → QSize
minimumSizeHint(self) → QSize
minimumWidth(self) → int
mouseDoubleClickEvent(self, QMouseEvent)
mouseGrabber() → QWidget
mouseMoveEvent(self, QMouseEvent)
mousePressEvent(self, QMouseEvent)
mouseReleaseEvent(self, QMouseEvent)
move(self, QPoint)

move(self, int, int)

moveEvent(self, QMoveEvent)
moveToThread(self, QThread)
nativeEvent(self, Union[QByteArray, bytes, bytearray], sip.voidptr) → Tuple[bool, int]
nativeParentWidget(self) → QWidget
nextInFocusChain(self) → QWidget
normalGeometry(self) → QRect
objectName(self) → str
objectNameChanged

objectNameChanged(self, str) [signal]

overrideWindowFlags(self, Union[Qt.WindowFlags, Qt.WindowType])
overrideWindowState(self, Union[Qt.WindowStates, Qt.WindowState])
paintEngine(self) → QPaintEngine
paintEvent(self, QPaintEvent)
paintingActive(self) → bool
palette(self) → QPalette
parent(self) → QObject
parentWidget(self) → QWidget
physicalDpiX(self) → int
physicalDpiY(self) → int
pos(self) → QPoint
previousInFocusChain(self) → QWidget
property(self, str) → Any
pyqtConfigure(...)

Each keyword argument is either the name of a Qt property or a Qt signal. For properties the property is set to the given value which should be of an appropriate type. For signals the signal is connected to the given value which should be a callable.

raise_(self)
receivers(self, PYQT_SIGNAL) → int
rect(self) → QRect
releaseKeyboard(self)
releaseMouse(self)
releaseShortcut(self, int)
removeAction(self, QAction)
removeEventFilter(self, QObject)
render(self, QPaintDevice, targetOffset: QPoint = QPoint(), sourceRegion: QRegion = QRegion(), flags: Union[QWidget.RenderFlags, QWidget.RenderFlag] = QWidget.RenderFlags(QWidget.DrawWindowBackground | QWidget.DrawChildren))

render(self, QPainter, targetOffset: QPoint = QPoint(), sourceRegion: QRegion = QRegion(), flags: Union[QWidget.RenderFlags, QWidget.RenderFlag] = QWidget.RenderFlags(QWidget.DrawWindowBackground|QWidget.DrawChildren))

repaint(self)

repaint(self, int, int, int, int) repaint(self, QRect) repaint(self, QRegion)

resize(self, QSize)

resize(self, int, int)

resizeEvent(self, QResizeEvent)
restoreGeometry(self, Union[QByteArray, bytes, bytearray]) → bool
saveGeometry(self) → QByteArray
saveSettings(jag_input, eid)

Save tab settings in jaguar handle. It is only used for settings which are not defined using keywords (typically per-atom settings). This function should be defined in subclasses for any tabs that contain per- atom settings.

Parameters
InputTabBase.scroll(self, int, int)

scroll(self, int, int, QRect)

sender(self) → QObject
senderSignalIndex(self) → int
setAcceptDrops(self, bool)
setAccessibleDescription(self, str)
setAccessibleName(self, str)
setAttribute(self, Qt.WidgetAttribute, on: bool = True)
setAutoFillBackground(self, bool)
setBackgroundRole(self, QPalette.ColorRole)
InputTabBase.setBaseSize(self, int, int)

setBaseSize(self, QSize)

InputTabBase.setContentsMargins(self, int, int, int, int)

setContentsMargins(self, QMargins)

setContextMenuPolicy(self, Qt.ContextMenuPolicy)
setCursor(self, Union[QCursor, Qt.CursorShape])
setDisabled(self, bool)
setEnabled(self, bool)
setFixedHeight(self, int)
setFixedSize(self, QSize)

setFixedSize(self, int, int)

setFixedWidth(self, int)
setFocus(self)

setFocus(self, Qt.FocusReason)

setFocusPolicy(self, Qt.FocusPolicy)
setFocusProxy(self, QWidget)
setFont(self, QFont)
setForegroundRole(self, QPalette.ColorRole)
setGeometry(self, QRect)

setGeometry(self, int, int, int, int)

setGraphicsEffect(self, QGraphicsEffect)
setHidden(self, bool)
setInputMethodHints(self, Union[Qt.InputMethodHints, Qt.InputMethodHint])
setLayout(self, QLayout)
setLayoutDirection(self, Qt.LayoutDirection)
setLocale(self, QLocale)
setMask(self, QBitmap)

setMask(self, QRegion)

setMaximumHeight(self, int)
InputTabBase.setMaximumSize(self, int, int)

setMaximumSize(self, QSize)

setMaximumWidth(self, int)
setMinimumHeight(self, int)
InputTabBase.setMinimumSize(self, int, int)

setMinimumSize(self, QSize)

setMinimumWidth(self, int)
setMouseTracking(self, bool)
setObjectName(self, str)
setPalette(self, QPalette)
setParent(self, QWidget)

setParent(self, QWidget, Union[Qt.WindowFlags, Qt.WindowType])

setProperty(self, str, Any) → bool
setShortcutAutoRepeat(self, int, enabled: bool = True)
setShortcutEnabled(self, int, enabled: bool = True)
InputTabBase.setSizeIncrement(self, int, int)

setSizeIncrement(self, QSize)

setSizePolicy(self, QSizePolicy)

setSizePolicy(self, QSizePolicy.Policy, QSizePolicy.Policy)

setStatusTip(self, str)
setStyle(self, QStyle)
setStyleSheet(self, str)
InputTabBase.setTabOrder(QWidget, QWidget)
setTabletTracking(self, bool)
setToolTip(self, str)
setToolTipDuration(self, int)
setUpdatesEnabled(self, bool)
setVisible(self, bool)
setWhatsThis(self, str)
setWindowFilePath(self, str)
setWindowFlag(self, Qt.WindowType, on: bool = True)
setWindowFlags(self, Union[Qt.WindowFlags, Qt.WindowType])
setWindowIcon(self, QIcon)
setWindowIconText(self, str)
setWindowModality(self, Qt.WindowModality)
setWindowModified(self, bool)
setWindowOpacity(self, float)
setWindowRole(self, str)
setWindowState(self, Union[Qt.WindowStates, Qt.WindowState])
setWindowTitle(self, str)
sharedPainter(self) → QPainter
show(self)
showEvent(self, QShowEvent)
showFullScreen(self)
showMaximized(self)
showMinimized(self)
showNormal(self)
signalsBlocked(self) → bool
size(self) → QSize
sizeHint(self) → QSize
sizeIncrement(self) → QSize
sizePolicy(self) → QSizePolicy
stackUnder(self, QWidget)
startTimer(self, int, timerType: Qt.TimerType = Qt.CoarseTimer) → int
staticMetaObject = <PyQt5.QtCore.QMetaObject object>
statusTip(self) → str
structureChanged
style(self) → QStyle
styleSheet(self) → str
tabletEvent(self, QTabletEvent)
testAttribute(self, Qt.WidgetAttribute) → bool
thread(self) → QThread
timerEvent(self, QTimerEvent)
toolTip(self) → str
toolTipDuration(self) → int
tr(self, str, disambiguation: str = None, n: int = - 1) → str
underMouse(self) → bool
ungrabGesture(self, Qt.GestureType)
unsetCursor(self)
unsetLayoutDirection(self)
unsetLocale(self)
update(self)

update(self, QRect) update(self, QRegion) update(self, int, int, int, int)

updateGeometry(self)
updateMicroFocus(self)
updatesEnabled(self) → bool
visibleRegion(self) → QRegion
warning(msg)

Display a warning dialog with the specified message

Parameters

msg (str) – The message to include in the warning dialog

whatsThis(self) → str
wheelEvent(self, QWheelEvent)
width(self) → int
widthMM(self) → int
winId(self) → sip.voidptr
window(self) → QWidget
windowFilePath(self) → str
windowFlags(self) → Qt.WindowFlags
windowHandle(self) → QWindow
windowIcon(self) → QIcon
windowIconChanged

windowIconChanged(self, QIcon) [signal]

windowIconText(self) → str
windowIconTextChanged

windowIconTextChanged(self, str) [signal]

windowModality(self) → Qt.WindowModality
windowOpacity(self) → float
windowRole(self) → str
windowState(self) → Qt.WindowStates
windowTitle(self) → str
windowTitleChanged

windowTitleChanged(self, str) [signal]

windowType(self) → Qt.WindowType
x(self) → int
y(self) → int
class schrodinger.application.jaguar.gui.tabs.input_tab.InputTab(parent, input_selector=None)[source]

Bases: schrodinger.application.jaguar.gui.tabs.base_tab.ProvidesTheoryMixin, schrodinger.application.jaguar.gui.tabs.base_tab.ProvidesBasisMixin, schrodinger.application.jaguar.gui.tabs.input_tab.InputTabBase

An input tab that allows the user to specify basis sets.

HELP_TOPIC = 'JAGUAR_INPUT_TAB'
UI_MODULES = (<module 'schrodinger.application.jaguar.gui.ui.input_top_ui' from '/scr/buildbot/savedbuilds/2021-2/NB/build-118/internal/lib/python3.8/site-packages/schrodinger/application/jaguar/gui/ui/input_top_ui.py'>, <module 'schrodinger.application.jaguar.gui.ui.input_std_bottom_ui' from '/scr/buildbot/savedbuilds/2021-2/NB/build-118/internal/lib/python3.8/site-packages/schrodinger/application/jaguar/gui/ui/input_std_bottom_ui.py'>)
setup()[source]

Perform tab specific initialization. This function should be defined in subclasses if initialization is needed.

getDefaultKeywords()[source]

The mmjag default basis set is “”, which would cause a warning, so we set the default basis. Additionally, the mmjag default DFT functional name is “”, which would cause a HF level of theory. Instead, set a default functional of B3LYP-D3.

Returns

A keyword dictionary with the default basis set and functional.

Return type

dict

loadSettings(jag_input)[source]

Restore tab settings from mmjag keywords. This function should be defined in subclasses.

Parameters

jag_input (schrodinger.application.jaguar.input.JaguarInput) – The Jaguar settings to base the tab settings on

getBasis(mixed_name='Mixed')[source]

Get the currently selected basis. If more than one basis set is specified, mixed_name will be returned. If the tab does not allow for specifying multiple basis sets, then this argument may be ignored.

Parameters

mixed_name (str) – The name to return if more than one basis set is specified

Returns

The currently selected basis

Return type

str

getTheoryLevel()[source]

Get the current theory level

Returns

The current theory level.

Return type

str

getAllUsedTheoryLevels()[source]
Returns

A tuple of all theory levels used

Return type

tuple

getMethod()[source]

Get the current method.

Returns

The current method

Return type

str

getFunctional(cur_struc=None)[source]

Get the current DFT functional.

Parameters

cur_struc (input_tab_widgets.ProjEntryTuple) – Current structure to get functional for. If not specified, functional will be returned based on default theory setting.

Returns

The current DFT functional

Return type

str or None

validate()[source]

Make sure that the tab settings will allow a job to be run successfully. Note that this validation should not be redundant with that performed in getMmJagKeywords. Any tab setting that prevents valid mmjag keywords from being generated should cause getMmJagKeywords to raise a JaguarSettingError. Any tab setting that allows mmjag keywords to be successfully generated but will result in a job failure should cause a validate fail. This function should be defined in subclasses if validation is needed.

Returns

If the validation passes, None is returned. If the validation fails, a string that describes the error is returned.

Return type

str or NoneType

getCommonBasis()[source]

If all structures use the same basis set, return the basis set name. Otherwise, return None.

Returns

The basis set name or None

Return type

str or NoneType

getCommonMethod()[source]

If all structures use the same method, return the method name. Otherwise, return None.

Returns

The method name or None

Return type

str or NoneType

getCommonTheoryLevel()[source]
Returns

If all current methods are of the same theory level, return the theory level. Otherwise return None.

Return type

str or None

chargedStrucsPresent()[source]

Determine if the user has specified any molecular charges

Returns

True if the user has specified a molecular charge for any molecule. False otherwise.

Return type

bool

getBasisForEid(eid, per_atom_name)[source]

Get the basis set for the specified entry id. If there are per-atom basis sets specified for the structure, the per_atom_name will be returned.

Parameters
  • eid (str) – The entry id

  • per_atom_name (str) – The name to return if per-atom basis sets are specified

Returns

The basis set name, or per_atom_name if per-atom basis sets are specified

Return type

Basis or str

getTheoryLevelForEid(eid)[source]

Get the theory level for the specified entry ID.

Parameters

eid – Entry ID to get theory level of.

type eid: int

Returns

Theory level for this entry ID.

Return type

str

getMethodForEid(eid)[source]

Get the method for the specified entry ID.

Parameters

eid – Entry ID to get method of.

type eid: int

Returns

Method for this entry ID.

Return type

str

DrawChildren = 2
DrawWindowBackground = 1
IgnoreMask = 4
MODEL_CLASS

alias of schrodinger.application.jaguar.gui.input_tab_widgets.InputEntriesModel

MULTIPLE_STRUC_JOB_TITLE = 'batch'
NAME = 'Input'
PROXY_CLASS

alias of schrodinger.application.jaguar.gui.input_tab_widgets.InputEntriesProxyModel

class PaintDeviceMetric

Bases: int

PdmDepth = 6
PdmDevicePixelRatio = 11
PdmDevicePixelRatioScaled = 12
PdmDpiX = 7
PdmDpiY = 8
PdmHeight = 2
PdmHeightMM = 4
PdmNumColors = 5
PdmPhysicalDpiX = 9
PdmPhysicalDpiY = 10
PdmWidth = 1
PdmWidthMM = 3
class RenderFlag

Bases: int

class RenderFlags

Bases: sip.simplewrapper

QWidget.RenderFlags(Union[QWidget.RenderFlags, QWidget.RenderFlag]) QWidget.RenderFlags(QWidget.RenderFlags)

__init__(*args, **kwargs)

Initialize self. See help(type(self)) for accurate signature.

VIEW_CLASS

alias of schrodinger.application.jaguar.gui.input_tab_widgets.InputEntriesView

__init__(parent, input_selector=None)

Perform common tab initialization. All tab specific initialization should go in setup().

Parameters
acceptDrops(self) → bool
accessibleDescription(self) → str
accessibleName(self) → str
actionEvent(self, QActionEvent)
actions(self) → List[QAction]
activate()

This function will be called whenever the user selects this tab. Subclasses can override it if necessary to, e.g., activate picking.

activateWindow(self)
addAction(self, QAction)
addActions(self, Iterable[QAction])
adjustSize(self)
autoFillBackground(self) → bool
backgroundRole(self) → QPalette.ColorRole
baseSize(self) → QSize
basis_changed
blockSignals(self, bool) → bool
changeEvent(self, QEvent)
childAt(self, QPoint) → QWidget

childAt(self, int, int) -> QWidget

childEvent(self, QChildEvent)
children(self) → List[QObject]
childrenRect(self) → QRect
childrenRegion(self) → QRegion
clearFocus(self)
clearMask(self)
close(self) → bool
closeEvent(self, QCloseEvent)
colorCount(self) → int
connectNotify(self, QMetaMethod)
contentsMargins(self) → QMargins
contentsRect(self) → QRect
contextMenuEvent(self, QContextMenuEvent)
contextMenuPolicy(self) → Qt.ContextMenuPolicy
create(self, window: sip.voidptr = 0, initializeWindow: bool = True, destroyOldWindow: bool = True)
createWindowContainer(QWindow, parent: QWidget = None, flags: Union[Qt.WindowFlags, Qt.WindowType] = 0) → QWidget
cursor(self) → QCursor
customContextMenuRequested

customContextMenuRequested(self, QPoint) [signal]

customEvent(self, QEvent)
deactivate()

This function will be called whenever the user selects a different tab. Subclasses can override it if necessary to, e.g., deactivate picking.

deleteLater(self)
depth(self) → int
destroy(self, destroyWindow: bool = True, destroySubWindows: bool = True)
destroyed

destroyed(self, object: QObject = None) [signal]

devType(self) → int
devicePixelRatio(self) → int
devicePixelRatioF(self) → float
devicePixelRatioFScale() → float
disconnect(self)
disconnectNotify(self, QMetaMethod)
dragEnterEvent(self, QDragEnterEvent)
dragLeaveEvent(self, QDragLeaveEvent)
dragMoveEvent(self, QDragMoveEvent)
dropEvent(self, QDropEvent)
dumpObjectInfo(self)
dumpObjectTree(self)
dynamicPropertyNames(self) → List[QByteArray]
effectiveWinId(self) → sip.voidptr
ensurePolished(self)
enterEvent(self, QEvent)
error(msg)

Display an error dialog with the specified message

Parameters

msg (str) – The message to include in the error dialog

event(self, QEvent) → bool
eventFilter(self, QObject, QEvent) → bool
find(sip.voidptr) → QWidget
findChild(self, type, name: str = '', options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) → QObject

findChild(self, Tuple, name: str = ‘’, options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) -> QObject

findChildren(self, type, name: str = '', options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, Tuple, name: str = ‘’, options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) -> List[QObject] findChildren(self, type, QRegExp, options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) -> List[QObject] findChildren(self, Tuple, QRegExp, options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) -> List[QObject] findChildren(self, type, QRegularExpression, options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) -> List[QObject] findChildren(self, Tuple, QRegularExpression, options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) -> List[QObject]

focusInEvent(self, QFocusEvent)
focusNextChild(self) → bool
focusNextPrevChild(self, bool) → bool
focusOutEvent(self, QFocusEvent)
focusPolicy(self) → Qt.FocusPolicy
focusPreviousChild(self) → bool
focusProxy(self) → QWidget
focusWidget(self) → QWidget
font(self) → QFont
fontInfo(self) → QFontInfo
fontMetrics(self) → QFontMetrics
foregroundRole(self) → QPalette.ColorRole
frameGeometry(self) → QRect
frameSize(self) → QSize
geometry(self) → QRect
getCommonFunctional()
Returns

If all entries use DFT and have the same functional set, return the functional. Otherwise return None.

Return type

str or None

getContentsMargins(self) → Tuple[int, int, int, int]
getMmJagKeywords()

Return all keywords that should be put into the mmjag handle. This function should be defined in subclasses.

Returns

All keywords that should be put into the mmjag handle

Return type

dict

Raises

schrodinger.application.jaguar.gui.utils.JaguarSettingError – If any settings are invalid.

getNumStructures()
getStructureTitleForJobname()

Get the structure title to be used in the job name. If the tab includes multiple structures, then MULTIPLE_STRUC_JOB_TITLE should be returned. If no structures have been specified yet, then None should be returned.

Returns

The structure title

Return type

str or NoneType

getStructures()

Get all structures loaded into the tab and their associated Jaguar settings

Returns

A list of tuples. Each tuple represents a single structure and contains:

Return type

list

grab(self, rectangle: QRect = QRect(QPoint(0, 0), QSize(- 1, - 1))) → QPixmap
grabGesture(self, Qt.GestureType, flags: Union[Qt.GestureFlags, Qt.GestureFlag] = Qt.GestureFlags())
grabKeyboard(self)
grabMouse(self)

grabMouse(self, Union[QCursor, Qt.CursorShape])

grabShortcut(self, Union[QKeySequence, QKeySequence.StandardKey, str, int], context: Qt.ShortcutContext = Qt.WindowShortcut) → int
graphicsEffect(self) → QGraphicsEffect
graphicsProxyWidget(self) → QGraphicsProxyWidget
hasFocus(self) → bool
hasHeightForWidth(self) → bool
hasMouseTracking(self) → bool
hasTabletTracking(self) → bool
height(self) → int
heightForWidth(self, int) → int
heightMM(self) → int
hide(self)
hideEvent(self, QHideEvent)
inherits(self, str) → bool
initPainter(self, QPainter)
inputMethodEvent(self, QInputMethodEvent)
inputMethodHints(self) → Qt.InputMethodHints
inputMethodQuery(self, Qt.InputMethodQuery) → Any
InputTab.insertAction(self, QAction, QAction)
insertActions(self, QAction, Iterable[QAction])
installEventFilter(self, QObject)
isActiveWindow(self) → bool
isAncestorOf(self, QWidget) → bool
isEnabled(self) → bool
isEnabledTo(self, QWidget) → bool
isFullScreen(self) → bool
isHidden(self) → bool
isLeftToRight(self) → bool
isMaximized(self) → bool
isMinimized(self) → bool
isModal(self) → bool
isRightToLeft(self) → bool
isSignalConnected(self, QMetaMethod) → bool
isVisible(self) → bool
isVisibleTo(self, QWidget) → bool
isWidgetType(self) → bool
isWindow(self) → bool
isWindowModified(self) → bool
isWindowType(self) → bool
keyPressEvent(self, QKeyEvent)
keyReleaseEvent(self, QKeyEvent)
keyboardGrabber() → QWidget
killTimer(self, int)
layout(self) → QLayout
layoutDirection(self) → Qt.LayoutDirection
leaveEvent(self, QEvent)
loadPerAtomSettings(jag_input, eid=None, title=None)

Restore per-atom tab settings from mmjag keywords. This function should be defined in subclasses for any tabs that contain per-atom settings.

Parameters
locale(self) → QLocale
logicalDpiX(self) → int
logicalDpiY(self) → int
lower(self)
mapFrom(self, QWidget, QPoint) → QPoint
mapFromGlobal(self, QPoint) → QPoint
mapFromParent(self, QPoint) → QPoint
mapTo(self, QWidget, QPoint) → QPoint
mapToGlobal(self, QPoint) → QPoint
mapToParent(self, QPoint) → QPoint
mask(self) → QRegion
maximumHeight(self) → int
maximumSize(self) → QSize
maximumWidth(self) → int
metaObject(self) → QMetaObject
method_changed
metric(self, QPaintDevice.PaintDeviceMetric) → int
minimumHeight(self) → int
minimumSize(self) → QSize
minimumSizeHint(self) → QSize
minimumWidth(self) → int
mouseDoubleClickEvent(self, QMouseEvent)
mouseGrabber() → QWidget
mouseMoveEvent(self, QMouseEvent)
mousePressEvent(self, QMouseEvent)
mouseReleaseEvent(self, QMouseEvent)
move(self, QPoint)

move(self, int, int)

moveEvent(self, QMoveEvent)
moveToThread(self, QThread)
nativeEvent(self, Union[QByteArray, bytes, bytearray], sip.voidptr) → Tuple[bool, int]
nativeParentWidget(self) → QWidget
nextInFocusChain(self) → QWidget
normalGeometry(self) → QRect
objectName(self) → str
objectNameChanged

objectNameChanged(self, str) [signal]

overrideWindowFlags(self, Union[Qt.WindowFlags, Qt.WindowType])
overrideWindowState(self, Union[Qt.WindowStates, Qt.WindowState])
paintEngine(self) → QPaintEngine
paintEvent(self, QPaintEvent)
paintingActive(self) → bool
palette(self) → QPalette
parent(self) → QObject
parentWidget(self) → QWidget
physicalDpiX(self) → int
physicalDpiY(self) → int
pos(self) → QPoint
previousInFocusChain(self) → QWidget
projectUpdated()

When the project is updated, update the selected entries table

property(self, str) → Any
pyqtConfigure(...)

Each keyword argument is either the name of a Qt property or a Qt signal. For properties the property is set to the given value which should be of an appropriate type. For signals the signal is connected to the given value which should be a callable.

raise_(self)
receivers(self, PYQT_SIGNAL) → int
rect(self) → QRect
releaseKeyboard(self)
releaseMouse(self)
releaseShortcut(self, int)
removeAction(self, QAction)
removeEventFilter(self, QObject)
render(self, QPaintDevice, targetOffset: QPoint = QPoint(), sourceRegion: QRegion = QRegion(), flags: Union[QWidget.RenderFlags, QWidget.RenderFlag] = QWidget.RenderFlags(QWidget.DrawWindowBackground | QWidget.DrawChildren))

render(self, QPainter, targetOffset: QPoint = QPoint(), sourceRegion: QRegion = QRegion(), flags: Union[QWidget.RenderFlags, QWidget.RenderFlag] = QWidget.RenderFlags(QWidget.DrawWindowBackground|QWidget.DrawChildren))

repaint(self)

repaint(self, int, int, int, int) repaint(self, QRect) repaint(self, QRegion)

reset()

Reset any structure specific settings in the table. (The non-struture specific settings will be reset via loadSettings())

resize(self, QSize)

resize(self, int, int)

resizeEvent(self, QResizeEvent)
restoreGeometry(self, Union[QByteArray, bytes, bytearray]) → bool
saveGeometry(self) → QByteArray
saveSettings(jag_input, eid)

Save tab settings in jaguar handle. It is only used for settings which are not defined using keywords (typically per-atom settings). This function should be defined in subclasses for any tabs that contain per- atom settings.

Parameters
InputTab.scroll(self, int, int)

scroll(self, int, int, QRect)

sender(self) → QObject
senderSignalIndex(self) → int
setAcceptDrops(self, bool)
setAccessibleDescription(self, str)
setAccessibleName(self, str)
setAttribute(self, Qt.WidgetAttribute, on: bool = True)
setAutoFillBackground(self, bool)
setBackgroundRole(self, QPalette.ColorRole)
InputTab.setBaseSize(self, int, int)

setBaseSize(self, QSize)

InputTab.setContentsMargins(self, int, int, int, int)

setContentsMargins(self, QMargins)

setContextMenuPolicy(self, Qt.ContextMenuPolicy)
setCursor(self, Union[QCursor, Qt.CursorShape])
setDisabled(self, bool)
setEnabled(self, bool)
setFixedHeight(self, int)
setFixedSize(self, QSize)

setFixedSize(self, int, int)

setFixedWidth(self, int)
setFocus(self)

setFocus(self, Qt.FocusReason)

setFocusPolicy(self, Qt.FocusPolicy)
setFocusProxy(self, QWidget)
setFont(self, QFont)
setForegroundRole(self, QPalette.ColorRole)
setGeometry(self, QRect)

setGeometry(self, int, int, int, int)

setGraphicsEffect(self, QGraphicsEffect)
setHidden(self, bool)
setInputMethodHints(self, Union[Qt.InputMethodHints, Qt.InputMethodHint])
setLayout(self, QLayout)
setLayoutDirection(self, Qt.LayoutDirection)
setLocale(self, QLocale)
setMask(self, QBitmap)

setMask(self, QRegion)

setMaximumHeight(self, int)
InputTab.setMaximumSize(self, int, int)

setMaximumSize(self, QSize)

setMaximumWidth(self, int)
setMinimumHeight(self, int)
InputTab.setMinimumSize(self, int, int)

setMinimumSize(self, QSize)

setMinimumWidth(self, int)
setMouseTracking(self, bool)
setObjectName(self, str)
setPalette(self, QPalette)
setParent(self, QWidget)

setParent(self, QWidget, Union[Qt.WindowFlags, Qt.WindowType])

setProperty(self, str, Any) → bool
setShortcutAutoRepeat(self, int, enabled: bool = True)
setShortcutEnabled(self, int, enabled: bool = True)
InputTab.setSizeIncrement(self, int, int)

setSizeIncrement(self, QSize)

setSizePolicy(self, QSizePolicy)

setSizePolicy(self, QSizePolicy.Policy, QSizePolicy.Policy)

setStatusTip(self, str)
setStyle(self, QStyle)
setStyleSheet(self, str)
InputTab.setTabOrder(QWidget, QWidget)
setTabletTracking(self, bool)
setToolTip(self, str)
setToolTipDuration(self, int)
setUpdatesEnabled(self, bool)
setVisible(self, bool)
setWhatsThis(self, str)
setWindowFilePath(self, str)
setWindowFlag(self, Qt.WindowType, on: bool = True)
setWindowFlags(self, Union[Qt.WindowFlags, Qt.WindowType])
setWindowIcon(self, QIcon)
setWindowIconText(self, str)
setWindowModality(self, Qt.WindowModality)
setWindowModified(self, bool)
setWindowOpacity(self, float)
setWindowRole(self, str)
setWindowState(self, Union[Qt.WindowStates, Qt.WindowState])
setWindowTitle(self, str)
sharedPainter(self) → QPainter
show(self)
showEvent(self, QShowEvent)
showFullScreen(self)
showMaximized(self)
showMinimized(self)
showNormal(self)
signalsBlocked(self) → bool
size(self) → QSize
sizeHint(self) → QSize
sizeIncrement(self) → QSize
sizePolicy(self) → QSizePolicy
stackUnder(self, QWidget)
startTimer(self, int, timerType: Qt.TimerType = Qt.CoarseTimer) → int
staticMetaObject = <PyQt5.QtCore.QMetaObject object>
statusTip(self) → str
strucSourceChanged
structureChanged
style(self) → QStyle
styleSheet(self) → str
tabletEvent(self, QTabletEvent)
testAttribute(self, Qt.WidgetAttribute) → bool
thread(self) → QThread
timerEvent(self, QTimerEvent)
toolTip(self) → str
toolTipDuration(self) → int
tr(self, str, disambiguation: str = None, n: int = - 1) → str
underMouse(self) → bool
ungrabGesture(self, Qt.GestureType)
unsetCursor(self)
unsetLayoutDirection(self)
unsetLocale(self)
update(self)

update(self, QRect) update(self, QRegion) update(self, int, int, int, int)

updateGeometry(self)
updateMicroFocus(self)
updatesEnabled(self) → bool
useFromComboChanged()

Respond to the user changing the structure source (from included to selected or vice versa).

usingSelected()

Return True if the tab is set to use selected entries. False if the tab is set to use included entries.

visibleRegion(self) → QRegion
warning(msg)

Display a warning dialog with the specified message

Parameters

msg (str) – The message to include in the warning dialog

whatsThis(self) → str
wheelEvent(self, QWheelEvent)
width(self) → int
widthMM(self) → int
winId(self) → sip.voidptr
window(self) → QWidget
windowFilePath(self) → str
windowFlags(self) → Qt.WindowFlags
windowHandle(self) → QWindow
windowIcon(self) → QIcon
windowIconChanged

windowIconChanged(self, QIcon) [signal]

windowIconText(self) → str
windowIconTextChanged

windowIconTextChanged(self, str) [signal]

windowModality(self) → Qt.WindowModality
windowOpacity(self) → float
windowRole(self) → str
windowState(self) → Qt.WindowStates
windowTitle(self) → str
windowTitleChanged

windowTitleChanged(self, str) [signal]

windowType(self) → Qt.WindowType
workspaceChanged(what_changed)

Update the table whenever the workspace changes in case the user changed the charge of a molecule.

Parameters

what_changed (str) – A flag indicating what changed in the workspace

x(self) → int
y(self) → int
class schrodinger.application.jaguar.gui.tabs.input_tab.InputTabPka(parent, input_selector=None)[source]

Bases: schrodinger.application.jaguar.gui.tabs.input_tab.InputTabBase

An input tab that allows the user to specify pKa atoms.

Variables
  • set_pka_marker (PyQt5.QtCore.pyqtSignal) –

    A signal emitted when a new pKa atom should be marked in the workspace. Emitted with two arguments:

  • remove_all_pka_markers (PyQt5.QtCore.pyqtSignal) – A signal emitted when the panel is reset and should thus remove all markers from the workspace.

HELP_TOPIC = 'JAGUAR_INPUT_TAB'
UI_MODULES = (<module 'schrodinger.application.jaguar.gui.ui.input_pka_top_ui' from '/scr/buildbot/savedbuilds/2021-2/NB/build-118/internal/lib/python3.8/site-packages/schrodinger/application/jaguar/gui/ui/input_pka_top_ui.py'>, <module 'schrodinger.application.jaguar.gui.ui.input_pka_bottom_ui' from '/scr/buildbot/savedbuilds/2021-2/NB/build-118/internal/lib/python3.8/site-packages/schrodinger/application/jaguar/gui/ui/input_pka_bottom_ui.py'>)
MODEL_CLASS

alias of schrodinger.application.jaguar.gui.input_tab_widgets_pka.InputEntriesModelPka

VIEW_CLASS

alias of schrodinger.application.jaguar.gui.input_tab_widgets_pka.InputEntriesViewPka

set_pka_marker
remove_all_pka_markers
SMARTS = 'SMARTS'
SMARTS_TOOLTIP = ''
AUTO = 'Automatic search'
AUTO_TOOLTIP = 'Application will attempt to locate all pKa atoms in all structures.\nStructures must be in the appropriate protonation form.\nNote that this search is not perfect and may miss some atoms or include others erroneously.'
setup()[source]

Perform tab specific initialization. This function should be defined in subclasses if initialization is needed.

onFindCheckToggled(state)[source]

If checked, disable editing of pka atom and enable combobox for choosing of pick mode. Update model to reflect new pick mode. Show smarts selector if new picking mode is SMARTS.

Parameters

state (bool) – If checkbox is checked or not

onPickModeComboChanged()[source]

Update model to reflect new pick mode. Show smarts selector if new picking mode is SMARTS.

onPickModeChanged()[source]

Update the model to reflect the new pick mode. If its SMARTS show and hide the define label and connect signals.

showDefineButton()[source]

Show the define label

hideDefineButton()[source]

Hide the define label

getPickingMode()[source]

Determine the current picking mode the tab is in

Returns

picking mode

Return type

input_tab_widgets_pka.PickingModes

runSmartsSearch()[source]

Run SMARTS searches on the entries in the entry table if the pick mode is SMARTS

getMmJagKeywords()[source]

Return all keywords that should be put into the mmjag handle. This function should be defined in subclasses.

Returns

All keywords that should be put into the mmjag handle

Return type

dict

Raises

schrodinger.application.jaguar.gui.utils.JaguarSettingError – If any settings are invalid.

isZwitterionChecked()[source]
isConformationalSearchesChecked()[source]
validate()[source]

Make sure that the tab settings will allow a job to be run successfully. Note that this validation should not be redundant with that performed in getMmJagKeywords. Any tab setting that prevents valid mmjag keywords from being generated should cause getMmJagKeywords to raise a JaguarSettingError. Any tab setting that allows mmjag keywords to be successfully generated but will result in a job failure should cause a validate fail. This function should be defined in subclasses if validation is needed.

Returns

If the validation passes, None is returned. If the validation fails, a string that describes the error is returned.

Return type

str or NoneType

loadSettings(jag_input)[source]

Restore tab settings from mmjag keywords. This function should be defined in subclasses.

Parameters

jag_input (schrodinger.application.jaguar.input.JaguarInput) – The Jaguar settings to base the tab settings on

setPickMethodToManual()[source]
setPickMethodToAuto()[source]
reset()[source]

Reset any structure specific settings in the table. (The non-struture specific settings will be reset via loadSettings())

DrawChildren = 2
DrawWindowBackground = 1
IgnoreMask = 4
MULTIPLE_STRUC_JOB_TITLE = 'batch'
NAME = 'Input'
PROXY_CLASS

alias of schrodinger.application.jaguar.gui.input_tab_widgets.InputEntriesProxyModel

class PaintDeviceMetric

Bases: int

PdmDepth = 6
PdmDevicePixelRatio = 11
PdmDevicePixelRatioScaled = 12
PdmDpiX = 7
PdmDpiY = 8
PdmHeight = 2
PdmHeightMM = 4
PdmNumColors = 5
PdmPhysicalDpiX = 9
PdmPhysicalDpiY = 10
PdmWidth = 1
PdmWidthMM = 3
class RenderFlag

Bases: int

class RenderFlags

Bases: sip.simplewrapper

QWidget.RenderFlags(Union[QWidget.RenderFlags, QWidget.RenderFlag]) QWidget.RenderFlags(QWidget.RenderFlags)

__init__(*args, **kwargs)

Initialize self. See help(type(self)) for accurate signature.

__init__(parent, input_selector=None)

Perform common tab initialization. All tab specific initialization should go in setup().

Parameters
acceptDrops(self) → bool
accessibleDescription(self) → str
accessibleName(self) → str
actionEvent(self, QActionEvent)
actions(self) → List[QAction]
activate()

This function will be called whenever the user selects this tab. Subclasses can override it if necessary to, e.g., activate picking.

activateWindow(self)
addAction(self, QAction)
addActions(self, Iterable[QAction])
adjustSize(self)
autoFillBackground(self) → bool
backgroundRole(self) → QPalette.ColorRole
baseSize(self) → QSize
blockSignals(self, bool) → bool
changeEvent(self, QEvent)
childAt(self, QPoint) → QWidget

childAt(self, int, int) -> QWidget

childEvent(self, QChildEvent)
children(self) → List[QObject]
childrenRect(self) → QRect
childrenRegion(self) → QRegion
clearFocus(self)
clearMask(self)
close(self) → bool
closeEvent(self, QCloseEvent)
colorCount(self) → int
connectNotify(self, QMetaMethod)
contentsMargins(self) → QMargins
contentsRect(self) → QRect
contextMenuEvent(self, QContextMenuEvent)
contextMenuPolicy(self) → Qt.ContextMenuPolicy
create(self, window: sip.voidptr = 0, initializeWindow: bool = True, destroyOldWindow: bool = True)
createWindowContainer(QWindow, parent: QWidget = None, flags: Union[Qt.WindowFlags, Qt.WindowType] = 0) → QWidget
cursor(self) → QCursor
customContextMenuRequested

customContextMenuRequested(self, QPoint) [signal]

customEvent(self, QEvent)
deactivate()

This function will be called whenever the user selects a different tab. Subclasses can override it if necessary to, e.g., deactivate picking.

deleteLater(self)
depth(self) → int
destroy(self, destroyWindow: bool = True, destroySubWindows: bool = True)
destroyed

destroyed(self, object: QObject = None) [signal]

devType(self) → int
devicePixelRatio(self) → int
devicePixelRatioF(self) → float
devicePixelRatioFScale() → float
disconnect(self)
disconnectNotify(self, QMetaMethod)
dragEnterEvent(self, QDragEnterEvent)
dragLeaveEvent(self, QDragLeaveEvent)
dragMoveEvent(self, QDragMoveEvent)
dropEvent(self, QDropEvent)
dumpObjectInfo(self)
dumpObjectTree(self)
dynamicPropertyNames(self) → List[QByteArray]
effectiveWinId(self) → sip.voidptr
ensurePolished(self)
enterEvent(self, QEvent)
error(msg)

Display an error dialog with the specified message

Parameters

msg (str) – The message to include in the error dialog

event(self, QEvent) → bool
eventFilter(self, QObject, QEvent) → bool
find(sip.voidptr) → QWidget
findChild(self, type, name: str = '', options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) → QObject

findChild(self, Tuple, name: str = ‘’, options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) -> QObject

findChildren(self, type, name: str = '', options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, Tuple, name: str = ‘’, options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) -> List[QObject] findChildren(self, type, QRegExp, options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) -> List[QObject] findChildren(self, Tuple, QRegExp, options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) -> List[QObject] findChildren(self, type, QRegularExpression, options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) -> List[QObject] findChildren(self, Tuple, QRegularExpression, options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) -> List[QObject]

focusInEvent(self, QFocusEvent)
focusNextChild(self) → bool
focusNextPrevChild(self, bool) → bool
focusOutEvent(self, QFocusEvent)
focusPolicy(self) → Qt.FocusPolicy
focusPreviousChild(self) → bool
focusProxy(self) → QWidget
focusWidget(self) → QWidget
font(self) → QFont
fontInfo(self) → QFontInfo
fontMetrics(self) → QFontMetrics
foregroundRole(self) → QPalette.ColorRole
frameGeometry(self) → QRect
frameSize(self) → QSize
geometry(self) → QRect
getContentsMargins(self) → Tuple[int, int, int, int]
getDefaultKeywords()

Get the default keywords for this tab. Note that defaults that exist in mmjag should not be explicitly set here.

getNumStructures()
getStructureTitleForJobname()

Get the structure title to be used in the job name. If the tab includes multiple structures, then MULTIPLE_STRUC_JOB_TITLE should be returned. If no structures have been specified yet, then None should be returned.

Returns

The structure title

Return type

str or NoneType

getStructures()

Get all structures loaded into the tab and their associated Jaguar settings

Returns

A list of tuples. Each tuple represents a single structure and contains:

Return type

list

grab(self, rectangle: QRect = QRect(QPoint(0, 0), QSize(- 1, - 1))) → QPixmap
grabGesture(self, Qt.GestureType, flags: Union[Qt.GestureFlags, Qt.GestureFlag] = Qt.GestureFlags())
grabKeyboard(self)
grabMouse(self)

grabMouse(self, Union[QCursor, Qt.CursorShape])

grabShortcut(self, Union[QKeySequence, QKeySequence.StandardKey, str, int], context: Qt.ShortcutContext = Qt.WindowShortcut) → int
graphicsEffect(self) → QGraphicsEffect
graphicsProxyWidget(self) → QGraphicsProxyWidget
hasFocus(self) → bool
hasHeightForWidth(self) → bool
hasMouseTracking(self) → bool
hasTabletTracking(self) → bool
height(self) → int
heightForWidth(self, int) → int
heightMM(self) → int
hide(self)
hideEvent(self, QHideEvent)
inherits(self, str) → bool
initPainter(self, QPainter)
inputMethodEvent(self, QInputMethodEvent)
inputMethodHints(self) → Qt.InputMethodHints
inputMethodQuery(self, Qt.InputMethodQuery) → Any
InputTabPka.insertAction(self, QAction, QAction)
insertActions(self, QAction, Iterable[QAction])
installEventFilter(self, QObject)
isActiveWindow(self) → bool
isAncestorOf(self, QWidget) → bool
isEnabled(self) → bool
isEnabledTo(self, QWidget) → bool
isFullScreen(self) → bool
isHidden(self) → bool
isLeftToRight(self) → bool
isMaximized(self) → bool
isMinimized(self) → bool
isModal(self) → bool
isRightToLeft(self) → bool
isSignalConnected(self, QMetaMethod) → bool
isVisible(self) → bool
isVisibleTo(self, QWidget) → bool
isWidgetType(self) → bool
isWindow(self) → bool
isWindowModified(self) → bool
isWindowType(self) → bool
keyPressEvent(self, QKeyEvent)
keyReleaseEvent(self, QKeyEvent)
keyboardGrabber() → QWidget
killTimer(self, int)
layout(self) → QLayout
layoutDirection(self) → Qt.LayoutDirection
leaveEvent(self, QEvent)
loadPerAtomSettings(jag_input, eid=None, title=None)

Restore per-atom tab settings from mmjag keywords. This function should be defined in subclasses for any tabs that contain per-atom settings.

Parameters
locale(self) → QLocale
logicalDpiX(self) → int
logicalDpiY(self) → int
lower(self)
mapFrom(self, QWidget, QPoint) → QPoint
mapFromGlobal(self, QPoint) → QPoint
mapFromParent(self, QPoint) → QPoint
mapTo(self, QWidget, QPoint) → QPoint
mapToGlobal(self, QPoint) → QPoint
mapToParent(self, QPoint) → QPoint
mask(self) → QRegion
maximumHeight(self) → int
maximumSize(self) → QSize
maximumWidth(self) → int
metaObject(self) → QMetaObject
metric(self, QPaintDevice.PaintDeviceMetric) → int
minimumHeight(self) → int
minimumSize(self) → QSize
minimumSizeHint(self) → QSize
minimumWidth(self) → int
mouseDoubleClickEvent(self, QMouseEvent)
mouseGrabber() → QWidget
mouseMoveEvent(self, QMouseEvent)
mousePressEvent(self, QMouseEvent)
mouseReleaseEvent(self, QMouseEvent)
move(self, QPoint)

move(self, int, int)

moveEvent(self, QMoveEvent)
moveToThread(self, QThread)
nativeEvent(self, Union[QByteArray, bytes, bytearray], sip.voidptr) → Tuple[bool, int]
nativeParentWidget(self) → QWidget
nextInFocusChain(self) → QWidget
normalGeometry(self) → QRect
objectName(self) → str
objectNameChanged

objectNameChanged(self, str) [signal]

overrideWindowFlags(self, Union[Qt.WindowFlags, Qt.WindowType])
overrideWindowState(self, Union[Qt.WindowStates, Qt.WindowState])
paintEngine(self) → QPaintEngine
paintEvent(self, QPaintEvent)
paintingActive(self) → bool
palette(self) → QPalette
parent(self) → QObject
parentWidget(self) → QWidget
physicalDpiX(self) → int
physicalDpiY(self) → int
pos(self) → QPoint
previousInFocusChain(self) → QWidget
projectUpdated()

When the project is updated, update the selected entries table

property(self, str) → Any
pyqtConfigure(...)

Each keyword argument is either the name of a Qt property or a Qt signal. For properties the property is set to the given value which should be of an appropriate type. For signals the signal is connected to the given value which should be a callable.

raise_(self)
receivers(self, PYQT_SIGNAL) → int
rect(self) → QRect
releaseKeyboard(self)
releaseMouse(self)
releaseShortcut(self, int)
removeAction(self, QAction)
removeEventFilter(self, QObject)
render(self, QPaintDevice, targetOffset: QPoint = QPoint(), sourceRegion: QRegion = QRegion(), flags: Union[QWidget.RenderFlags, QWidget.RenderFlag] = QWidget.RenderFlags(QWidget.DrawWindowBackground | QWidget.DrawChildren))

render(self, QPainter, targetOffset: QPoint = QPoint(), sourceRegion: QRegion = QRegion(), flags: Union[QWidget.RenderFlags, QWidget.RenderFlag] = QWidget.RenderFlags(QWidget.DrawWindowBackground|QWidget.DrawChildren))

repaint(self)

repaint(self, int, int, int, int) repaint(self, QRect) repaint(self, QRegion)

resize(self, QSize)

resize(self, int, int)

resizeEvent(self, QResizeEvent)
restoreGeometry(self, Union[QByteArray, bytes, bytearray]) → bool
saveGeometry(self) → QByteArray
saveSettings(jag_input, eid)

Save tab settings in jaguar handle. It is only used for settings which are not defined using keywords (typically per-atom settings). This function should be defined in subclasses for any tabs that contain per- atom settings.

Parameters
InputTabPka.scroll(self, int, int)

scroll(self, int, int, QRect)

sender(self) → QObject
senderSignalIndex(self) → int
setAcceptDrops(self, bool)
setAccessibleDescription(self, str)
setAccessibleName(self, str)
setAttribute(self, Qt.WidgetAttribute, on: bool = True)
setAutoFillBackground(self, bool)
setBackgroundRole(self, QPalette.ColorRole)
InputTabPka.setBaseSize(self, int, int)

setBaseSize(self, QSize)

InputTabPka.setContentsMargins(self, int, int, int, int)

setContentsMargins(self, QMargins)

setContextMenuPolicy(self, Qt.ContextMenuPolicy)
setCursor(self, Union[QCursor, Qt.CursorShape])
setDisabled(self, bool)
setEnabled(self, bool)
setFixedHeight(self, int)
setFixedSize(self, QSize)

setFixedSize(self, int, int)

setFixedWidth(self, int)
setFocus(self)

setFocus(self, Qt.FocusReason)

setFocusPolicy(self, Qt.FocusPolicy)
setFocusProxy(self, QWidget)
setFont(self, QFont)
setForegroundRole(self, QPalette.ColorRole)
setGeometry(self, QRect)

setGeometry(self, int, int, int, int)

setGraphicsEffect(self, QGraphicsEffect)
setHidden(self, bool)
setInputMethodHints(self, Union[Qt.InputMethodHints, Qt.InputMethodHint])
setLayout(self, QLayout)
setLayoutDirection(self, Qt.LayoutDirection)
setLocale(self, QLocale)
setMask(self, QBitmap)

setMask(self, QRegion)

setMaximumHeight(self, int)
InputTabPka.setMaximumSize(self, int, int)

setMaximumSize(self, QSize)

setMaximumWidth(self, int)
setMinimumHeight(self, int)
InputTabPka.setMinimumSize(self, int, int)

setMinimumSize(self, QSize)

setMinimumWidth(self, int)
setMouseTracking(self, bool)
setObjectName(self, str)
setPalette(self, QPalette)
setParent(self, QWidget)

setParent(self, QWidget, Union[Qt.WindowFlags, Qt.WindowType])

setProperty(self, str, Any) → bool
setShortcutAutoRepeat(self, int, enabled: bool = True)
setShortcutEnabled(self, int, enabled: bool = True)
InputTabPka.setSizeIncrement(self, int, int)

setSizeIncrement(self, QSize)

setSizePolicy(self, QSizePolicy)

setSizePolicy(self, QSizePolicy.Policy, QSizePolicy.Policy)

setStatusTip(self, str)
setStyle(self, QStyle)
setStyleSheet(self, str)
InputTabPka.setTabOrder(QWidget, QWidget)
setTabletTracking(self, bool)
setToolTip(self, str)
setToolTipDuration(self, int)
setUpdatesEnabled(self, bool)
setVisible(self, bool)
setWhatsThis(self, str)
setWindowFilePath(self, str)
setWindowFlag(self, Qt.WindowType, on: bool = True)
setWindowFlags(self, Union[Qt.WindowFlags, Qt.WindowType])
setWindowIcon(self, QIcon)
setWindowIconText(self, str)
setWindowModality(self, Qt.WindowModality)
setWindowModified(self, bool)
setWindowOpacity(self, float)
setWindowRole(self, str)
setWindowState(self, Union[Qt.WindowStates, Qt.WindowState])
setWindowTitle(self, str)
sharedPainter(self) → QPainter
show(self)
showEvent(self, QShowEvent)
showFullScreen(self)
showMaximized(self)
showMinimized(self)
showNormal(self)
signalsBlocked(self) → bool
size(self) → QSize
sizeHint(self) → QSize
sizeIncrement(self) → QSize
sizePolicy(self) → QSizePolicy
stackUnder(self, QWidget)
startTimer(self, int, timerType: Qt.TimerType = Qt.CoarseTimer) → int
staticMetaObject = <PyQt5.QtCore.QMetaObject object>
statusTip(self) → str
strucSourceChanged
structureChanged
style(self) → QStyle
styleSheet(self) → str
tabletEvent(self, QTabletEvent)
testAttribute(self, Qt.WidgetAttribute) → bool
thread(self) → QThread
timerEvent(self, QTimerEvent)
toolTip(self) → str
toolTipDuration(self) → int
tr(self, str, disambiguation: str = None, n: int = - 1) → str
underMouse(self) → bool
ungrabGesture(self, Qt.GestureType)
unsetCursor(self)
unsetLayoutDirection(self)
unsetLocale(self)
update(self)

update(self, QRect) update(self, QRegion) update(self, int, int, int, int)

updateGeometry(self)
updateMicroFocus(self)
updatesEnabled(self) → bool
useFromComboChanged()

Respond to the user changing the structure source (from included to selected or vice versa).

usingSelected()

Return True if the tab is set to use selected entries. False if the tab is set to use included entries.

visibleRegion(self) → QRegion
warning(msg)

Display a warning dialog with the specified message

Parameters

msg (str) – The message to include in the warning dialog

whatsThis(self) → str
wheelEvent(self, QWheelEvent)
width(self) → int
widthMM(self) → int
winId(self) → sip.voidptr
window(self) → QWidget
windowFilePath(self) → str
windowFlags(self) → Qt.WindowFlags
windowHandle(self) → QWindow
windowIcon(self) → QIcon
windowIconChanged

windowIconChanged(self, QIcon) [signal]

windowIconText(self) → str
windowIconTextChanged

windowIconTextChanged(self, str) [signal]

windowModality(self) → Qt.WindowModality
windowOpacity(self) → float
windowRole(self) → str
windowState(self) → Qt.WindowStates
windowTitle(self) → str
windowTitleChanged

windowTitleChanged(self, str) [signal]

windowType(self) → Qt.WindowType
workspaceChanged(what_changed)

Update the table whenever the workspace changes in case the user changed the charge of a molecule.

Parameters

what_changed (str) – A flag indicating what changed in the workspace

x(self) → int
y(self) → int
class schrodinger.application.jaguar.gui.tabs.input_tab.InputTabHB(parent, input_selector=None)[source]

Bases: schrodinger.application.jaguar.gui.tabs.input_tab.InputTabBase

An input tab that is used with Hydrogen Bond task.

HELP_TOPIC = 'JAGUAR_HYDROGEN_BOND'
UI_MODULES = (<module 'schrodinger.application.jaguar.gui.ui.input_hb_top_ui' from '/scr/buildbot/savedbuilds/2021-2/NB/build-118/internal/lib/python3.8/site-packages/schrodinger/application/jaguar/gui/ui/input_hb_top_ui.py'>, <module 'schrodinger.application.jaguar.gui.ui.input_hb_bottom_ui' from '/scr/buildbot/savedbuilds/2021-2/NB/build-118/internal/lib/python3.8/site-packages/schrodinger/application/jaguar/gui/ui/input_hb_bottom_ui.py'>)
MODEL_CLASS

alias of schrodinger.application.jaguar.gui.input_tab_widgets_hb.InputEntriesModelHB

VIEW_CLASS

alias of schrodinger.application.jaguar.gui.input_tab_widgets.InputEntriesView

getMmJagKeywords()[source]

There are no jaguar handle keywords that this tab sets, but we need this function to override the one in the base class.

loadSettings(jag_input)[source]

Restore tab settings from mmjag keywords. This function should be defined in subclasses.

Parameters

jag_input (schrodinger.application.jaguar.input.JaguarInput) – The Jaguar settings to base the tab settings on

isFastMode()[source]

This function return True if ‘Fast Mode’ check box is checked.

Returns

True if ‘Fast Mode’ check box is toggled.

Return type

bool

getOptimizationCmd()[source]

This function returns command argument corresponding to the checked optimization option. If ‘Optimize all structure’ option is selected this function returns None.

Returns

optimization command argument

Return type

string or None

reset()[source]

This function resets optimization and ‘fast mode’ settings to default state. This function needs to be called every time when input file is loaded.

DrawChildren = 2
DrawWindowBackground = 1
IgnoreMask = 4
MULTIPLE_STRUC_JOB_TITLE = 'batch'
NAME = 'Input'
PROXY_CLASS

alias of schrodinger.application.jaguar.gui.input_tab_widgets.InputEntriesProxyModel

class PaintDeviceMetric

Bases: int

PdmDepth = 6
PdmDevicePixelRatio = 11
PdmDevicePixelRatioScaled = 12
PdmDpiX = 7
PdmDpiY = 8
PdmHeight = 2
PdmHeightMM = 4
PdmNumColors = 5
PdmPhysicalDpiX = 9
PdmPhysicalDpiY = 10
PdmWidth = 1
PdmWidthMM = 3
class RenderFlag

Bases: int

class RenderFlags

Bases: sip.simplewrapper

QWidget.RenderFlags(Union[QWidget.RenderFlags, QWidget.RenderFlag]) QWidget.RenderFlags(QWidget.RenderFlags)

__init__(*args, **kwargs)

Initialize self. See help(type(self)) for accurate signature.

__init__(parent, input_selector=None)

Perform common tab initialization. All tab specific initialization should go in setup().

Parameters
acceptDrops(self) → bool
accessibleDescription(self) → str
accessibleName(self) → str
actionEvent(self, QActionEvent)
actions(self) → List[QAction]
activate()

This function will be called whenever the user selects this tab. Subclasses can override it if necessary to, e.g., activate picking.

activateWindow(self)
addAction(self, QAction)
addActions(self, Iterable[QAction])
adjustSize(self)
autoFillBackground(self) → bool
backgroundRole(self) → QPalette.ColorRole
baseSize(self) → QSize
blockSignals(self, bool) → bool
changeEvent(self, QEvent)
childAt(self, QPoint) → QWidget

childAt(self, int, int) -> QWidget

childEvent(self, QChildEvent)
children(self) → List[QObject]
childrenRect(self) → QRect
childrenRegion(self) → QRegion
clearFocus(self)
clearMask(self)
close(self) → bool
closeEvent(self, QCloseEvent)
colorCount(self) → int
connectNotify(self, QMetaMethod)
contentsMargins(self) → QMargins
contentsRect(self) → QRect
contextMenuEvent(self, QContextMenuEvent)
contextMenuPolicy(self) → Qt.ContextMenuPolicy
create(self, window: sip.voidptr = 0, initializeWindow: bool = True, destroyOldWindow: bool = True)
createWindowContainer(QWindow, parent: QWidget = None, flags: Union[Qt.WindowFlags, Qt.WindowType] = 0) → QWidget
cursor(self) → QCursor
customContextMenuRequested

customContextMenuRequested(self, QPoint) [signal]

customEvent(self, QEvent)
deactivate()

This function will be called whenever the user selects a different tab. Subclasses can override it if necessary to, e.g., deactivate picking.

deleteLater(self)
depth(self) → int
destroy(self, destroyWindow: bool = True, destroySubWindows: bool = True)
destroyed

destroyed(self, object: QObject = None) [signal]

devType(self) → int
devicePixelRatio(self) → int
devicePixelRatioF(self) → float
devicePixelRatioFScale() → float
disconnect(self)
disconnectNotify(self, QMetaMethod)
dragEnterEvent(self, QDragEnterEvent)
dragLeaveEvent(self, QDragLeaveEvent)
dragMoveEvent(self, QDragMoveEvent)
dropEvent(self, QDropEvent)
dumpObjectInfo(self)
dumpObjectTree(self)
dynamicPropertyNames(self) → List[QByteArray]
effectiveWinId(self) → sip.voidptr
ensurePolished(self)
enterEvent(self, QEvent)
error(msg)

Display an error dialog with the specified message

Parameters

msg (str) – The message to include in the error dialog

event(self, QEvent) → bool
eventFilter(self, QObject, QEvent) → bool
find(sip.voidptr) → QWidget
findChild(self, type, name: str = '', options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) → QObject

findChild(self, Tuple, name: str = ‘’, options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) -> QObject

findChildren(self, type, name: str = '', options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, Tuple, name: str = ‘’, options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) -> List[QObject] findChildren(self, type, QRegExp, options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) -> List[QObject] findChildren(self, Tuple, QRegExp, options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) -> List[QObject] findChildren(self, type, QRegularExpression, options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) -> List[QObject] findChildren(self, Tuple, QRegularExpression, options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) -> List[QObject]

focusInEvent(self, QFocusEvent)
focusNextChild(self) → bool
focusNextPrevChild(self, bool) → bool
focusOutEvent(self, QFocusEvent)
focusPolicy(self) → Qt.FocusPolicy
focusPreviousChild(self) → bool
focusProxy(self) → QWidget
focusWidget(self) → QWidget
font(self) → QFont
fontInfo(self) → QFontInfo
fontMetrics(self) → QFontMetrics
foregroundRole(self) → QPalette.ColorRole
frameGeometry(self) → QRect
frameSize(self) → QSize
geometry(self) → QRect
getContentsMargins(self) → Tuple[int, int, int, int]
getDefaultKeywords()

Get the default keywords for this tab. Note that defaults that exist in mmjag should not be explicitly set here.

getNumStructures()
getStructureTitleForJobname()

Get the structure title to be used in the job name. If the tab includes multiple structures, then MULTIPLE_STRUC_JOB_TITLE should be returned. If no structures have been specified yet, then None should be returned.

Returns

The structure title

Return type

str or NoneType

getStructures()

Get all structures loaded into the tab and their associated Jaguar settings

Returns

A list of tuples. Each tuple represents a single structure and contains:

Return type

list

grab(self, rectangle: QRect = QRect(QPoint(0, 0), QSize(- 1, - 1))) → QPixmap
grabGesture(self, Qt.GestureType, flags: Union[Qt.GestureFlags, Qt.GestureFlag] = Qt.GestureFlags())
grabKeyboard(self)
grabMouse(self)

grabMouse(self, Union[QCursor, Qt.CursorShape])

grabShortcut(self, Union[QKeySequence, QKeySequence.StandardKey, str, int], context: Qt.ShortcutContext = Qt.WindowShortcut) → int
graphicsEffect(self) → QGraphicsEffect
graphicsProxyWidget(self) → QGraphicsProxyWidget
hasFocus(self) → bool
hasHeightForWidth(self) → bool
hasMouseTracking(self) → bool
hasTabletTracking(self) → bool
height(self) → int
heightForWidth(self, int) → int
heightMM(self) → int
hide(self)
hideEvent(self, QHideEvent)
inherits(self, str) → bool
initPainter(self, QPainter)
inputMethodEvent(self, QInputMethodEvent)
inputMethodHints(self) → Qt.InputMethodHints
inputMethodQuery(self, Qt.InputMethodQuery) → Any
InputTabHB.insertAction(self, QAction, QAction)
insertActions(self, QAction, Iterable[QAction])
installEventFilter(self, QObject)
isActiveWindow(self) → bool
isAncestorOf(self, QWidget) → bool
isEnabled(self) → bool
isEnabledTo(self, QWidget) → bool
isFullScreen(self) → bool
isHidden(self) → bool
isLeftToRight(self) → bool
isMaximized(self) → bool
isMinimized(self) → bool
isModal(self) → bool
isRightToLeft(self) → bool
isSignalConnected(self, QMetaMethod) → bool
isVisible(self) → bool
isVisibleTo(self, QWidget) → bool
isWidgetType(self) → bool
isWindow(self) → bool
isWindowModified(self) → bool
isWindowType(self) → bool
keyPressEvent(self, QKeyEvent)
keyReleaseEvent(self, QKeyEvent)
keyboardGrabber() → QWidget
killTimer(self, int)
layout(self) → QLayout
layoutDirection(self) → Qt.LayoutDirection
leaveEvent(self, QEvent)
loadPerAtomSettings(jag_input, eid=None, title=None)

Restore per-atom tab settings from mmjag keywords. This function should be defined in subclasses for any tabs that contain per-atom settings.

Parameters
locale(self) → QLocale
logicalDpiX(self) → int
logicalDpiY(self) → int
lower(self)
mapFrom(self, QWidget, QPoint) → QPoint
mapFromGlobal(self, QPoint) → QPoint
mapFromParent(self, QPoint) → QPoint
mapTo(self, QWidget, QPoint) → QPoint
mapToGlobal(self, QPoint) → QPoint
mapToParent(self, QPoint) → QPoint
mask(self) → QRegion
maximumHeight(self) → int
maximumSize(self) → QSize
maximumWidth(self) → int
metaObject(self) → QMetaObject
metric(self, QPaintDevice.PaintDeviceMetric) → int
minimumHeight(self) → int
minimumSize(self) → QSize
minimumSizeHint(self) → QSize
minimumWidth(self) → int
mouseDoubleClickEvent(self, QMouseEvent)
mouseGrabber() → QWidget
mouseMoveEvent(self, QMouseEvent)
mousePressEvent(self, QMouseEvent)
mouseReleaseEvent(self, QMouseEvent)
move(self, QPoint)

move(self, int, int)

moveEvent(self, QMoveEvent)
moveToThread(self, QThread)
nativeEvent(self, Union[QByteArray, bytes, bytearray], sip.voidptr) → Tuple[bool, int]
nativeParentWidget(self) → QWidget
nextInFocusChain(self) → QWidget
normalGeometry(self) → QRect
objectName(self) → str
objectNameChanged

objectNameChanged(self, str) [signal]

overrideWindowFlags(self, Union[Qt.WindowFlags, Qt.WindowType])
overrideWindowState(self, Union[Qt.WindowStates, Qt.WindowState])
paintEngine(self) → QPaintEngine
paintEvent(self, QPaintEvent)
paintingActive(self) → bool
palette(self) → QPalette
parent(self) → QObject
parentWidget(self) → QWidget
physicalDpiX(self) → int
physicalDpiY(self) → int
pos(self) → QPoint
previousInFocusChain(self) → QWidget
projectUpdated()

When the project is updated, update the selected entries table

property(self, str) → Any
pyqtConfigure(...)

Each keyword argument is either the name of a Qt property or a Qt signal. For properties the property is set to the given value which should be of an appropriate type. For signals the signal is connected to the given value which should be a callable.

raise_(self)
receivers(self, PYQT_SIGNAL) → int
rect(self) → QRect
releaseKeyboard(self)
releaseMouse(self)
releaseShortcut(self, int)
removeAction(self, QAction)
removeEventFilter(self, QObject)
render(self, QPaintDevice, targetOffset: QPoint = QPoint(), sourceRegion: QRegion = QRegion(), flags: Union[QWidget.RenderFlags, QWidget.RenderFlag] = QWidget.RenderFlags(QWidget.DrawWindowBackground | QWidget.DrawChildren))

render(self, QPainter, targetOffset: QPoint = QPoint(), sourceRegion: QRegion = QRegion(), flags: Union[QWidget.RenderFlags, QWidget.RenderFlag] = QWidget.RenderFlags(QWidget.DrawWindowBackground|QWidget.DrawChildren))

repaint(self)

repaint(self, int, int, int, int) repaint(self, QRect) repaint(self, QRegion)

resize(self, QSize)

resize(self, int, int)

resizeEvent(self, QResizeEvent)
restoreGeometry(self, Union[QByteArray, bytes, bytearray]) → bool
saveGeometry(self) → QByteArray
saveSettings(jag_input, eid)

Save tab settings in jaguar handle. It is only used for settings which are not defined using keywords (typically per-atom settings). This function should be defined in subclasses for any tabs that contain per- atom settings.

Parameters
InputTabHB.scroll(self, int, int)

scroll(self, int, int, QRect)

sender(self) → QObject
senderSignalIndex(self) → int
setAcceptDrops(self, bool)
setAccessibleDescription(self, str)
setAccessibleName(self, str)
setAttribute(self, Qt.WidgetAttribute, on: bool = True)
setAutoFillBackground(self, bool)
setBackgroundRole(self, QPalette.ColorRole)
InputTabHB.setBaseSize(self, int, int)

setBaseSize(self, QSize)

InputTabHB.setContentsMargins(self, int, int, int, int)

setContentsMargins(self, QMargins)

setContextMenuPolicy(self, Qt.ContextMenuPolicy)
setCursor(self, Union[QCursor, Qt.CursorShape])
setDisabled(self, bool)
setEnabled(self, bool)
setFixedHeight(self, int)
setFixedSize(self, QSize)

setFixedSize(self, int, int)

setFixedWidth(self, int)
setFocus(self)

setFocus(self, Qt.FocusReason)

setFocusPolicy(self, Qt.FocusPolicy)
setFocusProxy(self, QWidget)
setFont(self, QFont)
setForegroundRole(self, QPalette.ColorRole)
setGeometry(self, QRect)

setGeometry(self, int, int, int, int)

setGraphicsEffect(self, QGraphicsEffect)
setHidden(self, bool)
setInputMethodHints(self, Union[Qt.InputMethodHints, Qt.InputMethodHint])
setLayout(self, QLayout)
setLayoutDirection(self, Qt.LayoutDirection)
setLocale(self, QLocale)
setMask(self, QBitmap)

setMask(self, QRegion)

setMaximumHeight(self, int)
InputTabHB.setMaximumSize(self, int, int)

setMaximumSize(self, QSize)

setMaximumWidth(self, int)
setMinimumHeight(self, int)
InputTabHB.setMinimumSize(self, int, int)

setMinimumSize(self, QSize)

setMinimumWidth(self, int)
setMouseTracking(self, bool)
setObjectName(self, str)
setPalette(self, QPalette)
setParent(self, QWidget)

setParent(self, QWidget, Union[Qt.WindowFlags, Qt.WindowType])

setProperty(self, str, Any) → bool
setShortcutAutoRepeat(self, int, enabled: bool = True)
setShortcutEnabled(self, int, enabled: bool = True)
InputTabHB.setSizeIncrement(self, int, int)

setSizeIncrement(self, QSize)

setSizePolicy(self, QSizePolicy)

setSizePolicy(self, QSizePolicy.Policy, QSizePolicy.Policy)

setStatusTip(self, str)
setStyle(self, QStyle)
setStyleSheet(self, str)
InputTabHB.setTabOrder(QWidget, QWidget)
setTabletTracking(self, bool)
setToolTip(self, str)
setToolTipDuration(self, int)
setUpdatesEnabled(self, bool)
setVisible(self, bool)
setWhatsThis(self, str)
setWindowFilePath(self, str)
setWindowFlag(self, Qt.WindowType, on: bool = True)
setWindowFlags(self, Union[Qt.WindowFlags, Qt.WindowType])
setWindowIcon(self, QIcon)
setWindowIconText(self, str)
setWindowModality(self, Qt.WindowModality)
setWindowModified(self, bool)
setWindowOpacity(self, float)
setWindowRole(self, str)
setWindowState(self, Union[Qt.WindowStates, Qt.WindowState])
setWindowTitle(self, str)
setup()

Perform tab specific initialization. This function should be defined in subclasses if initialization is needed.

sharedPainter(self) → QPainter
show(self)
showEvent(self, QShowEvent)
showFullScreen(self)
showMaximized(self)
showMinimized(self)
showNormal(self)
signalsBlocked(self) → bool
size(self) → QSize
sizeHint(self) → QSize
sizeIncrement(self) → QSize
sizePolicy(self) → QSizePolicy
stackUnder(self, QWidget)
startTimer(self, int, timerType: Qt.TimerType = Qt.CoarseTimer) → int
staticMetaObject = <PyQt5.QtCore.QMetaObject object>
statusTip(self) → str
strucSourceChanged
structureChanged
style(self) → QStyle
styleSheet(self) → str
tabletEvent(self, QTabletEvent)
testAttribute(self, Qt.WidgetAttribute) → bool
thread(self) → QThread
timerEvent(self, QTimerEvent)
toolTip(self) → str
toolTipDuration(self) → int
tr(self, str, disambiguation: str = None, n: int = - 1) → str
underMouse(self) → bool
ungrabGesture(self, Qt.GestureType)
unsetCursor(self)
unsetLayoutDirection(self)
unsetLocale(self)
update(self)

update(self, QRect) update(self, QRegion) update(self, int, int, int, int)

updateGeometry(self)
updateMicroFocus(self)
updatesEnabled(self) → bool
useFromComboChanged()

Respond to the user changing the structure source (from included to selected or vice versa).

usingSelected()

Return True if the tab is set to use selected entries. False if the tab is set to use included entries.

validate()

Make sure that the tab settings will allow a job to be run successfully. Note that this validation should not be redundant with that performed in getMmJagKeywords. Any tab setting that prevents valid mmjag keywords from being generated should cause getMmJagKeywords to raise a JaguarSettingError. Any tab setting that allows mmjag keywords to be successfully generated but will result in a job failure should cause a validate fail. This function should be defined in subclasses if validation is needed.

Returns

If the validation passes, None is returned. If the validation fails, a string that describes the error is returned.

Return type

str or NoneType

visibleRegion(self) → QRegion
warning(msg)

Display a warning dialog with the specified message

Parameters

msg (str) – The message to include in the warning dialog

whatsThis(self) → str
wheelEvent(self, QWheelEvent)
width(self) → int
widthMM(self) → int
winId(self) → sip.voidptr
window(self) → QWidget
windowFilePath(self) → str
windowFlags(self) → Qt.WindowFlags
windowHandle(self) → QWindow
windowIcon(self) → QIcon
windowIconChanged

windowIconChanged(self, QIcon) [signal]

windowIconText(self) → str
windowIconTextChanged

windowIconTextChanged(self, str) [signal]

windowModality(self) → Qt.WindowModality
windowOpacity(self) → float
windowRole(self) → str
windowState(self) → Qt.WindowStates
windowTitle(self) → str
windowTitleChanged

windowTitleChanged(self, str) [signal]

windowType(self) → Qt.WindowType
workspaceChanged(what_changed)

Update the table whenever the workspace changes in case the user changed the charge of a molecule.

Parameters

what_changed (str) – A flag indicating what changed in the workspace

x(self) → int
y(self) → int
class schrodinger.application.jaguar.gui.tabs.input_tab.InputTabWithSubTabs(parent, input_selector=None)[source]

Bases: schrodinger.application.jaguar.gui.tabs.input_tab.InputTab

An Input tab with sub-tabs on the bottom. Sub-tabs can be set using addSubTabs, which is normally accessed by setting the INPUT_SUB_TABS panel class variable.

Variables
  • DEFAULT_SUB_TAB_VISIBILITY (bool) – Whether the sub-tabs should be visible by default. Sub-tab visibility can be toggled at any time using setSubTabsVisible, which is connected to the “Atom-Level Settings” button.

  • subTabChanged (PyQt5.QtCore.pyqtSignal) – A signal emitted when the active sub-tab has been changed, or when the sub-tab visibility has been toggled.

  • addJaguarMarker (PyQt5.QtCore.pyqtSignal) –

    A signal emitted when a workspace marker should be added. Emitted with:

    • The list of atoms to add the marker for (list)

    • The marker settings (dict)

    • The name of the sub-tab that the marker is for (str)

  • removeJaguarMarker (PyQt5.QtCore.pyqtSignal) –

    A signal emitted when a workspace marker should be removed. Emitted with:

    • The list of atoms to remove the marker for (list)

    • The name of the sub-tab that the marker is for (str)

  • setMarkerHighlighting (PyQt5.QtCore.pyqtSignal) –

    A signal emitted when the highlighting of a workspace marker should be changed. Emitted with:

    • The list of atoms to change the highlighting for (list)

    • Whether the marker should be highlighted (True) or unhighlighted (False) (bool)

    • The name of the sub-tab that the marker is for (str)

UI_MODULES = (<module 'schrodinger.application.jaguar.gui.ui.input_top_ui' from '/scr/buildbot/savedbuilds/2021-2/NB/build-118/internal/lib/python3.8/site-packages/schrodinger/application/jaguar/gui/ui/input_top_ui.py'>, <module 'schrodinger.application.jaguar.gui.ui.input_std_bottom_ui' from '/scr/buildbot/savedbuilds/2021-2/NB/build-118/internal/lib/python3.8/site-packages/schrodinger/application/jaguar/gui/ui/input_std_bottom_ui.py'>)
DEFAULT_SUB_TAB_VISIBILITY = False
SUB_TAB_NAME = '%s (%i)'
subTabChanged
addJaguarMarker
removeJaguarMarker
setMarkerHighlighting
addSubTabs(sub_tab_classes)[source]

Add a sub tab for each of the specified classes. Note that this function should be called only once per instance.

Parameters

sub_tab_classes (iterable) – An iterable of schrodinger.application.jaguar. gui.tabs.input_sub_tabs.base_sub_tab.BaseSubTab sub-classes to be instantiated.

getChargeConstraintSubTab()[source]

Get the subtab that holds the charge constraint settings

Return type

schrodinger.application.jaguar.gui.input_sub_tabs. ChargeConstraintsSubTab

Returns

The charge constraint subtab, or None if no such tab exists

getBasisSetSubTab()[source]

Get the subtab that holds the by-atom basis set settings

Return type

schrodinger.application.jaguar.gui.input_sub_tabs. BasisSetSubTab

Returns

The by-atom basis set subtab, or None if no such tab exists

getSubTab(sub_tab_class)[source]

Get the sub-tab of the specified class

Parameters

sub_tab_class (type) – The class of the sub-tab to retrieve

setup()[source]

Perform tab specific initialization. This function should be defined in subclasses if initialization is needed.

projectUpdated()[source]

Whenever the project is updated, update the structure titles and the structures shown in the sub tabs.

reset()[source]

Reset any structure specific settings in the table. (The non-struture specific settings will be reset via loadSettings())

setSubTabsVisible(visible=None)[source]

Set whether the sub-tabs are visible in response to the user clicking on the “Atom-Level Settings” button.

Parameters

visible (bool or NoneType) – Should the sub-tabs be made visible. If not specified, the visibility will be toggled.

subTabsVisible()[source]

Are the sub-tabs currently visible?

Returns

True if the sub-tabs are visible. False otherwise.

Return type

bool

validate()[source]

Make sure that the tab settings will allow a job to be run successfully. Note that this validation should not be redundant with that performed in getMmJagKeywords. Any tab setting that prevents valid mmjag keywords from being generated should cause getMmJagKeywords to raise a JaguarSettingError. Any tab setting that allows mmjag keywords to be successfully generated but will result in a job failure should cause a validate fail. This function should be defined in subclasses if validation is needed.

Returns

If the validation passes, None is returned. If the validation fails, a string that describes the error is returned.

Return type

str or NoneType

saveSettings(jag_input, eid)[source]

Save tab settings in jaguar handle. It is only used for settings which are not defined using keywords (typically per-atom settings). This function should be defined in subclasses for any tabs that contain per- atom settings.

Parameters
loadPerAtomSettings(jag_input, eid, title)[source]

Restore per-atom tab settings from mmjag keywords. This function should be defined in subclasses for any tabs that contain per-atom settings.

Parameters
activeSubTab()[source]

Get the active sub tab

Returns

The active sub-tab or None if the sub-tabs are not visible

Return type

schrodinger.application.jaguar.gui.input_sub_tabs. base_sub_tab.BaseSubTab or NoneType

activeSubTabName()[source]

Get the name of the active sub-tab

Returns

The name of the active sub-tab or None if the sub-tabs are not visible

Return type

str or NoneType

activate()[source]

Activate the appropriate sub-tab (if any) when this tab is activated

deactivate()[source]

Deactivate the active sub-tab (if any)

displayedEntryIds()[source]

Return the entry IDs for all structures that are currently displayed in the input table

Returns

A set of entry ids

Return type

set

perAtomBasisSetsPresent()[source]

Have any per-atom basis sets been set?

Returns

True if there are per-atom basis sets for any currently selected structures. False otherwise.

Return type

bool

getCommonBasis()[source]

If all structures use the same basis set and there are no per-atom basis sets, return the basis set name. Otherwise, return None.

Returns

The basis set name or None

Return type

str or NoneType

theoryChanged(theory_level)[source]

If there is a Charge Constraints sub-tab, disable or enable it when the level of theory changes.

Parameters

theory_level (str) – The current level of theory. Should be one of “DFT”, “HF”, “LMP2” or “Mixed”.

useFromComboChanged()[source]

Update the sub-tabs when the user changes the structure source (from included to selected or vice versa).

DrawChildren = 2
DrawWindowBackground = 1
HELP_TOPIC = 'JAGUAR_INPUT_TAB'
IgnoreMask = 4
MODEL_CLASS

alias of schrodinger.application.jaguar.gui.input_tab_widgets.InputEntriesModel

MULTIPLE_STRUC_JOB_TITLE = 'batch'
NAME = 'Input'
PROXY_CLASS

alias of schrodinger.application.jaguar.gui.input_tab_widgets.InputEntriesProxyModel

class PaintDeviceMetric

Bases: int

PdmDepth = 6
PdmDevicePixelRatio = 11
PdmDevicePixelRatioScaled = 12
PdmDpiX = 7
PdmDpiY = 8
PdmHeight = 2
PdmHeightMM = 4
PdmNumColors = 5
PdmPhysicalDpiX = 9
PdmPhysicalDpiY = 10
PdmWidth = 1
PdmWidthMM = 3
class RenderFlag

Bases: int

class RenderFlags

Bases: sip.simplewrapper

QWidget.RenderFlags(Union[QWidget.RenderFlags, QWidget.RenderFlag]) QWidget.RenderFlags(QWidget.RenderFlags)

__init__(*args, **kwargs)

Initialize self. See help(type(self)) for accurate signature.

VIEW_CLASS

alias of schrodinger.application.jaguar.gui.input_tab_widgets.InputEntriesView

__init__(parent, input_selector=None)

Perform common tab initialization. All tab specific initialization should go in setup().

Parameters
acceptDrops(self) → bool
accessibleDescription(self) → str
accessibleName(self) → str
actionEvent(self, QActionEvent)
actions(self) → List[QAction]
activateWindow(self)
addAction(self, QAction)
addActions(self, Iterable[QAction])
adjustSize(self)
autoFillBackground(self) → bool
backgroundRole(self) → QPalette.ColorRole
baseSize(self) → QSize
basis_changed
blockSignals(self, bool) → bool
changeEvent(self, QEvent)
chargedStrucsPresent()

Determine if the user has specified any molecular charges

Returns

True if the user has specified a molecular charge for any molecule. False otherwise.

Return type

bool

childAt(self, QPoint) → QWidget

childAt(self, int, int) -> QWidget

childEvent(self, QChildEvent)
children(self) → List[QObject]
childrenRect(self) → QRect
childrenRegion(self) → QRegion
clearFocus(self)
clearMask(self)
close(self) → bool
closeEvent(self, QCloseEvent)
colorCount(self) → int
connectNotify(self, QMetaMethod)
contentsMargins(self) → QMargins
contentsRect(self) → QRect
contextMenuEvent(self, QContextMenuEvent)
contextMenuPolicy(self) → Qt.ContextMenuPolicy
create(self, window: sip.voidptr = 0, initializeWindow: bool = True, destroyOldWindow: bool = True)
createWindowContainer(QWindow, parent: QWidget = None, flags: Union[Qt.WindowFlags, Qt.WindowType] = 0) → QWidget
cursor(self) → QCursor
customContextMenuRequested

customContextMenuRequested(self, QPoint) [signal]

customEvent(self, QEvent)
deleteLater(self)
depth(self) → int
destroy(self, destroyWindow: bool = True, destroySubWindows: bool = True)
destroyed

destroyed(self, object: QObject = None) [signal]

devType(self) → int
devicePixelRatio(self) → int
devicePixelRatioF(self) → float
devicePixelRatioFScale() → float
disconnect(self)
disconnectNotify(self, QMetaMethod)
dragEnterEvent(self, QDragEnterEvent)
dragLeaveEvent(self, QDragLeaveEvent)
dragMoveEvent(self, QDragMoveEvent)
dropEvent(self, QDropEvent)
dumpObjectInfo(self)
dumpObjectTree(self)
dynamicPropertyNames(self) → List[QByteArray]
effectiveWinId(self) → sip.voidptr
ensurePolished(self)
enterEvent(self, QEvent)
error(msg)

Display an error dialog with the specified message

Parameters

msg (str) – The message to include in the error dialog

event(self, QEvent) → bool
eventFilter(self, QObject, QEvent) → bool
find(sip.voidptr) → QWidget
findChild(self, type, name: str = '', options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) → QObject

findChild(self, Tuple, name: str = ‘’, options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) -> QObject

findChildren(self, type, name: str = '', options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, Tuple, name: str = ‘’, options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) -> List[QObject] findChildren(self, type, QRegExp, options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) -> List[QObject] findChildren(self, Tuple, QRegExp, options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) -> List[QObject] findChildren(self, type, QRegularExpression, options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) -> List[QObject] findChildren(self, Tuple, QRegularExpression, options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) -> List[QObject]

focusInEvent(self, QFocusEvent)
focusNextChild(self) → bool
focusNextPrevChild(self, bool) → bool
focusOutEvent(self, QFocusEvent)
focusPolicy(self) → Qt.FocusPolicy
focusPreviousChild(self) → bool
focusProxy(self) → QWidget
focusWidget(self) → QWidget
font(self) → QFont
fontInfo(self) → QFontInfo
fontMetrics(self) → QFontMetrics
foregroundRole(self) → QPalette.ColorRole
frameGeometry(self) → QRect
frameSize(self) → QSize
geometry(self) → QRect
getAllUsedTheoryLevels()
Returns

A tuple of all theory levels used

Return type

tuple

getBasis(mixed_name='Mixed')

Get the currently selected basis. If more than one basis set is specified, mixed_name will be returned. If the tab does not allow for specifying multiple basis sets, then this argument may be ignored.

Parameters

mixed_name (str) – The name to return if more than one basis set is specified

Returns

The currently selected basis

Return type

str

getBasisForEid(eid, per_atom_name)

Get the basis set for the specified entry id. If there are per-atom basis sets specified for the structure, the per_atom_name will be returned.

Parameters
  • eid (str) – The entry id

  • per_atom_name (str) – The name to return if per-atom basis sets are specified

Returns

The basis set name, or per_atom_name if per-atom basis sets are specified

Return type

Basis or str

getCommonFunctional()
Returns

If all entries use DFT and have the same functional set, return the functional. Otherwise return None.

Return type

str or None

getCommonMethod()

If all structures use the same method, return the method name. Otherwise, return None.

Returns

The method name or None

Return type

str or NoneType

getCommonTheoryLevel()
Returns

If all current methods are of the same theory level, return the theory level. Otherwise return None.

Return type

str or None

getContentsMargins(self) → Tuple[int, int, int, int]
getDefaultKeywords()

The mmjag default basis set is “”, which would cause a warning, so we set the default basis. Additionally, the mmjag default DFT functional name is “”, which would cause a HF level of theory. Instead, set a default functional of B3LYP-D3.

Returns

A keyword dictionary with the default basis set and functional.

Return type

dict

getFunctional(cur_struc=None)

Get the current DFT functional.

Parameters

cur_struc (input_tab_widgets.ProjEntryTuple) – Current structure to get functional for. If not specified, functional will be returned based on default theory setting.

Returns

The current DFT functional

Return type

str or None

getMethod()

Get the current method.

Returns

The current method

Return type

str

getMethodForEid(eid)

Get the method for the specified entry ID.

Parameters

eid – Entry ID to get method of.

type eid: int

Returns

Method for this entry ID.

Return type

str

getMmJagKeywords()

Return all keywords that should be put into the mmjag handle. This function should be defined in subclasses.

Returns

All keywords that should be put into the mmjag handle

Return type

dict

Raises

schrodinger.application.jaguar.gui.utils.JaguarSettingError – If any settings are invalid.

getNumStructures()
getStructureTitleForJobname()

Get the structure title to be used in the job name. If the tab includes multiple structures, then MULTIPLE_STRUC_JOB_TITLE should be returned. If no structures have been specified yet, then None should be returned.

Returns

The structure title

Return type

str or NoneType

getStructures()

Get all structures loaded into the tab and their associated Jaguar settings

Returns

A list of tuples. Each tuple represents a single structure and contains:

Return type

list

getTheoryLevel()

Get the current theory level

Returns

The current theory level.

Return type

str

getTheoryLevelForEid(eid)

Get the theory level for the specified entry ID.

Parameters

eid – Entry ID to get theory level of.

type eid: int

Returns

Theory level for this entry ID.

Return type

str

grab(self, rectangle: QRect = QRect(QPoint(0, 0), QSize(- 1, - 1))) → QPixmap
grabGesture(self, Qt.GestureType, flags: Union[Qt.GestureFlags, Qt.GestureFlag] = Qt.GestureFlags())
grabKeyboard(self)
grabMouse(self)

grabMouse(self, Union[QCursor, Qt.CursorShape])

grabShortcut(self, Union[QKeySequence, QKeySequence.StandardKey, str, int], context: Qt.ShortcutContext = Qt.WindowShortcut) → int
graphicsEffect(self) → QGraphicsEffect
graphicsProxyWidget(self) → QGraphicsProxyWidget
hasFocus(self) → bool
hasHeightForWidth(self) → bool
hasMouseTracking(self) → bool
hasTabletTracking(self) → bool
height(self) → int
heightForWidth(self, int) → int
heightMM(self) → int
hide(self)
hideEvent(self, QHideEvent)
inherits(self, str) → bool
initPainter(self, QPainter)
inputMethodEvent(self, QInputMethodEvent)
inputMethodHints(self) → Qt.InputMethodHints
inputMethodQuery(self, Qt.InputMethodQuery) → Any
InputTabWithSubTabs.insertAction(self, QAction, QAction)
insertActions(self, QAction, Iterable[QAction])
installEventFilter(self, QObject)
isActiveWindow(self) → bool
isAncestorOf(self, QWidget) → bool
isEnabled(self) → bool
isEnabledTo(self, QWidget) → bool
isFullScreen(self) → bool
isHidden(self) → bool
isLeftToRight(self) → bool
isMaximized(self) → bool
isMinimized(self) → bool
isModal(self) → bool
isRightToLeft(self) → bool
isSignalConnected(self, QMetaMethod) → bool
isVisible(self) → bool
isVisibleTo(self, QWidget) → bool
isWidgetType(self) → bool
isWindow(self) → bool
isWindowModified(self) → bool
isWindowType(self) → bool
keyPressEvent(self, QKeyEvent)
keyReleaseEvent(self, QKeyEvent)
keyboardGrabber() → QWidget
killTimer(self, int)
layout(self) → QLayout
layoutDirection(self) → Qt.LayoutDirection
leaveEvent(self, QEvent)
loadSettings(jag_input)

Restore tab settings from mmjag keywords. This function should be defined in subclasses.

Parameters

jag_input (schrodinger.application.jaguar.input.JaguarInput) – The Jaguar settings to base the tab settings on

locale(self) → QLocale
logicalDpiX(self) → int
logicalDpiY(self) → int
lower(self)
mapFrom(self, QWidget, QPoint) → QPoint
mapFromGlobal(self, QPoint) → QPoint
mapFromParent(self, QPoint) → QPoint
mapTo(self, QWidget, QPoint) → QPoint
mapToGlobal(self, QPoint) → QPoint
mapToParent(self, QPoint) → QPoint
mask(self) → QRegion
maximumHeight(self) → int
maximumSize(self) → QSize
maximumWidth(self) → int
metaObject(self) → QMetaObject
method_changed
metric(self, QPaintDevice.PaintDeviceMetric) → int
minimumHeight(self) → int
minimumSize(self) → QSize
minimumSizeHint(self) → QSize
minimumWidth(self) → int
mouseDoubleClickEvent(self, QMouseEvent)
mouseGrabber() → QWidget
mouseMoveEvent(self, QMouseEvent)
mousePressEvent(self, QMouseEvent)
mouseReleaseEvent(self, QMouseEvent)
move(self, QPoint)

move(self, int, int)

moveEvent(self, QMoveEvent)
moveToThread(self, QThread)
nativeEvent(self, Union[QByteArray, bytes, bytearray], sip.voidptr) → Tuple[bool, int]
nativeParentWidget(self) → QWidget
nextInFocusChain(self) → QWidget
normalGeometry(self) → QRect
objectName(self) → str
objectNameChanged

objectNameChanged(self, str) [signal]

overrideWindowFlags(self, Union[Qt.WindowFlags, Qt.WindowType])
overrideWindowState(self, Union[Qt.WindowStates, Qt.WindowState])
paintEngine(self) → QPaintEngine
paintEvent(self, QPaintEvent)
paintingActive(self) → bool
palette(self) → QPalette
parent(self) → QObject
parentWidget(self) → QWidget
physicalDpiX(self) → int
physicalDpiY(self) → int
pos(self) → QPoint
previousInFocusChain(self) → QWidget
property(self, str) → Any
pyqtConfigure(...)

Each keyword argument is either the name of a Qt property or a Qt signal. For properties the property is set to the given value which should be of an appropriate type. For signals the signal is connected to the given value which should be a callable.

raise_(self)
receivers(self, PYQT_SIGNAL) → int
rect(self) → QRect
releaseKeyboard(self)
releaseMouse(self)
releaseShortcut(self, int)
removeAction(self, QAction)
removeEventFilter(self, QObject)
render(self, QPaintDevice, targetOffset: QPoint = QPoint(), sourceRegion: QRegion = QRegion(), flags: Union[QWidget.RenderFlags, QWidget.RenderFlag] = QWidget.RenderFlags(QWidget.DrawWindowBackground | QWidget.DrawChildren))

render(self, QPainter, targetOffset: QPoint = QPoint(), sourceRegion: QRegion = QRegion(), flags: Union[QWidget.RenderFlags, QWidget.RenderFlag] = QWidget.RenderFlags(QWidget.DrawWindowBackground|QWidget.DrawChildren))

repaint(self)

repaint(self, int, int, int, int) repaint(self, QRect) repaint(self, QRegion)

resize(self, QSize)

resize(self, int, int)

resizeEvent(self, QResizeEvent)
restoreGeometry(self, Union[QByteArray, bytes, bytearray]) → bool
saveGeometry(self) → QByteArray
InputTabWithSubTabs.scroll(self, int, int)

scroll(self, int, int, QRect)

sender(self) → QObject
senderSignalIndex(self) → int
setAcceptDrops(self, bool)
setAccessibleDescription(self, str)
setAccessibleName(self, str)
setAttribute(self, Qt.WidgetAttribute, on: bool = True)
setAutoFillBackground(self, bool)
setBackgroundRole(self, QPalette.ColorRole)
InputTabWithSubTabs.setBaseSize(self, int, int)

setBaseSize(self, QSize)

InputTabWithSubTabs.setContentsMargins(self, int, int, int, int)

setContentsMargins(self, QMargins)

setContextMenuPolicy(self, Qt.ContextMenuPolicy)
setCursor(self, Union[QCursor, Qt.CursorShape])
setDisabled(self, bool)
setEnabled(self, bool)
setFixedHeight(self, int)
setFixedSize(self, QSize)

setFixedSize(self, int, int)

setFixedWidth(self, int)
setFocus(self)

setFocus(self, Qt.FocusReason)

setFocusPolicy(self, Qt.FocusPolicy)
setFocusProxy(self, QWidget)
setFont(self, QFont)
setForegroundRole(self, QPalette.ColorRole)
setGeometry(self, QRect)

setGeometry(self, int, int, int, int)

setGraphicsEffect(self, QGraphicsEffect)
setHidden(self, bool)
setInputMethodHints(self, Union[Qt.InputMethodHints, Qt.InputMethodHint])
setLayout(self, QLayout)
setLayoutDirection(self, Qt.LayoutDirection)
setLocale(self, QLocale)
setMask(self, QBitmap)

setMask(self, QRegion)

setMaximumHeight(self, int)
InputTabWithSubTabs.setMaximumSize(self, int, int)

setMaximumSize(self, QSize)

setMaximumWidth(self, int)
setMinimumHeight(self, int)
InputTabWithSubTabs.setMinimumSize(self, int, int)

setMinimumSize(self, QSize)

setMinimumWidth(self, int)
setMouseTracking(self, bool)
setObjectName(self, str)
setPalette(self, QPalette)
setParent(self, QWidget)

setParent(self, QWidget, Union[Qt.WindowFlags, Qt.WindowType])

setProperty(self, str, Any) → bool
setShortcutAutoRepeat(self, int, enabled: bool = True)
setShortcutEnabled(self, int, enabled: bool = True)
InputTabWithSubTabs.setSizeIncrement(self, int, int)

setSizeIncrement(self, QSize)

setSizePolicy(self, QSizePolicy)

setSizePolicy(self, QSizePolicy.Policy, QSizePolicy.Policy)

setStatusTip(self, str)
setStyle(self, QStyle)
setStyleSheet(self, str)
InputTabWithSubTabs.setTabOrder(QWidget, QWidget)
setTabletTracking(self, bool)
setToolTip(self, str)
setToolTipDuration(self, int)
setUpdatesEnabled(self, bool)
setVisible(self, bool)
setWhatsThis(self, str)
setWindowFilePath(self, str)
setWindowFlag(self, Qt.WindowType, on: bool = True)
setWindowFlags(self, Union[Qt.WindowFlags, Qt.WindowType])
setWindowIcon(self, QIcon)
setWindowIconText(self, str)
setWindowModality(self, Qt.WindowModality)
setWindowModified(self, bool)
setWindowOpacity(self, float)
setWindowRole(self, str)
setWindowState(self, Union[Qt.WindowStates, Qt.WindowState])
setWindowTitle(self, str)
sharedPainter(self) → QPainter
show(self)
showEvent(self, QShowEvent)
showFullScreen(self)
showMaximized(self)
showMinimized(self)
showNormal(self)
signalsBlocked(self) → bool
size(self) → QSize
sizeHint(self) → QSize
sizeIncrement(self) → QSize
sizePolicy(self) → QSizePolicy
stackUnder(self, QWidget)
startTimer(self, int, timerType: Qt.TimerType = Qt.CoarseTimer) → int
staticMetaObject = <PyQt5.QtCore.QMetaObject object>
statusTip(self) → str
strucSourceChanged
structureChanged
style(self) → QStyle
styleSheet(self) → str
tabletEvent(self, QTabletEvent)
testAttribute(self, Qt.WidgetAttribute) → bool
thread(self) → QThread
timerEvent(self, QTimerEvent)
toolTip(self) → str
toolTipDuration(self) → int
tr(self, str, disambiguation: str = None, n: int = - 1) → str
underMouse(self) → bool
ungrabGesture(self, Qt.GestureType)
unsetCursor(self)
unsetLayoutDirection(self)
unsetLocale(self)
update(self)

update(self, QRect) update(self, QRegion) update(self, int, int, int, int)

updateGeometry(self)
updateMicroFocus(self)
updatesEnabled(self) → bool
usingSelected()

Return True if the tab is set to use selected entries. False if the tab is set to use included entries.

visibleRegion(self) → QRegion
warning(msg)

Display a warning dialog with the specified message

Parameters

msg (str) – The message to include in the warning dialog

whatsThis(self) → str
wheelEvent(self, QWheelEvent)
width(self) → int
widthMM(self) → int
winId(self) → sip.voidptr
window(self) → QWidget
windowFilePath(self) → str
windowFlags(self) → Qt.WindowFlags
windowHandle(self) → QWindow
windowIcon(self) → QIcon
windowIconChanged

windowIconChanged(self, QIcon) [signal]

windowIconText(self) → str
windowIconTextChanged

windowIconTextChanged(self, str) [signal]

windowModality(self) → Qt.WindowModality
windowOpacity(self) → float
windowRole(self) → str
windowState(self) → Qt.WindowStates
windowTitle(self) → str
windowTitleChanged

windowTitleChanged(self, str) [signal]

windowType(self) → Qt.WindowType
workspaceChanged(what_changed)

Update the table whenever the workspace changes in case the user changed the charge of a molecule.

Parameters

what_changed (str) – A flag indicating what changed in the workspace

x(self) → int
y(self) → int
class schrodinger.application.jaguar.gui.tabs.input_tab.InputTabCoordinateScan(parent, input_selector=None)[source]

Bases: schrodinger.application.jaguar.gui.tabs.input_tab.InputTab

Input tab used in Rigid and Relaxed Coordinate scan GUIs. It modifies ‘Input structures from’ combo box to include only the ‘Workspace (included)’ item.

setup()[source]

Perform tab specific initialization. This function should be defined in subclasses if initialization is needed.

DrawChildren = 2
DrawWindowBackground = 1
HELP_TOPIC = 'JAGUAR_INPUT_TAB'
IgnoreMask = 4
MODEL_CLASS

alias of schrodinger.application.jaguar.gui.input_tab_widgets.InputEntriesModel

MULTIPLE_STRUC_JOB_TITLE = 'batch'
NAME = 'Input'
PROXY_CLASS

alias of schrodinger.application.jaguar.gui.input_tab_widgets.InputEntriesProxyModel

class PaintDeviceMetric

Bases: int

PdmDepth = 6
PdmDevicePixelRatio = 11
PdmDevicePixelRatioScaled = 12
PdmDpiX = 7
PdmDpiY = 8
PdmHeight = 2
PdmHeightMM = 4
PdmNumColors = 5
PdmPhysicalDpiX = 9
PdmPhysicalDpiY = 10
PdmWidth = 1
PdmWidthMM = 3
class RenderFlag

Bases: int

class RenderFlags

Bases: sip.simplewrapper

QWidget.RenderFlags(Union[QWidget.RenderFlags, QWidget.RenderFlag]) QWidget.RenderFlags(QWidget.RenderFlags)

__init__(*args, **kwargs)

Initialize self. See help(type(self)) for accurate signature.

UI_MODULES = (<module 'schrodinger.application.jaguar.gui.ui.input_top_ui' from '/scr/buildbot/savedbuilds/2021-2/NB/build-118/internal/lib/python3.8/site-packages/schrodinger/application/jaguar/gui/ui/input_top_ui.py'>, <module 'schrodinger.application.jaguar.gui.ui.input_std_bottom_ui' from '/scr/buildbot/savedbuilds/2021-2/NB/build-118/internal/lib/python3.8/site-packages/schrodinger/application/jaguar/gui/ui/input_std_bottom_ui.py'>)
VIEW_CLASS

alias of schrodinger.application.jaguar.gui.input_tab_widgets.InputEntriesView

__init__(parent, input_selector=None)

Perform common tab initialization. All tab specific initialization should go in setup().

Parameters
acceptDrops(self) → bool
accessibleDescription(self) → str
accessibleName(self) → str
actionEvent(self, QActionEvent)
actions(self) → List[QAction]
activate()

This function will be called whenever the user selects this tab. Subclasses can override it if necessary to, e.g., activate picking.

activateWindow(self)
addAction(self, QAction)
addActions(self, Iterable[QAction])
adjustSize(self)
autoFillBackground(self) → bool
backgroundRole(self) → QPalette.ColorRole
baseSize(self) → QSize
basis_changed
blockSignals(self, bool) → bool
changeEvent(self, QEvent)
chargedStrucsPresent()

Determine if the user has specified any molecular charges

Returns

True if the user has specified a molecular charge for any molecule. False otherwise.

Return type

bool

childAt(self, QPoint) → QWidget

childAt(self, int, int) -> QWidget

childEvent(self, QChildEvent)
children(self) → List[QObject]
childrenRect(self) → QRect
childrenRegion(self) → QRegion
clearFocus(self)
clearMask(self)
close(self) → bool
closeEvent(self, QCloseEvent)
colorCount(self) → int
connectNotify(self, QMetaMethod)
contentsMargins(self) → QMargins
contentsRect(self) → QRect
contextMenuEvent(self, QContextMenuEvent)
contextMenuPolicy(self) → Qt.ContextMenuPolicy
create(self, window: sip.voidptr = 0, initializeWindow: bool = True, destroyOldWindow: bool = True)
createWindowContainer(QWindow, parent: QWidget = None, flags: Union[Qt.WindowFlags, Qt.WindowType] = 0) → QWidget
cursor(self) → QCursor
customContextMenuRequested

customContextMenuRequested(self, QPoint) [signal]

customEvent(self, QEvent)
deactivate()

This function will be called whenever the user selects a different tab. Subclasses can override it if necessary to, e.g., deactivate picking.

deleteLater(self)
depth(self) → int
destroy(self, destroyWindow: bool = True, destroySubWindows: bool = True)
destroyed

destroyed(self, object: QObject = None) [signal]

devType(self) → int
devicePixelRatio(self) → int
devicePixelRatioF(self) → float
devicePixelRatioFScale() → float
disconnect(self)
disconnectNotify(self, QMetaMethod)
dragEnterEvent(self, QDragEnterEvent)
dragLeaveEvent(self, QDragLeaveEvent)
dragMoveEvent(self, QDragMoveEvent)
dropEvent(self, QDropEvent)
dumpObjectInfo(self)
dumpObjectTree(self)
dynamicPropertyNames(self) → List[QByteArray]
effectiveWinId(self) → sip.voidptr
ensurePolished(self)
enterEvent(self, QEvent)
error(msg)

Display an error dialog with the specified message

Parameters

msg (str) – The message to include in the error dialog

event(self, QEvent) → bool
eventFilter(self, QObject, QEvent) → bool
find(sip.voidptr) → QWidget
findChild(self, type, name: str = '', options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) → QObject

findChild(self, Tuple, name: str = ‘’, options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) -> QObject

findChildren(self, type, name: str = '', options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, Tuple, name: str = ‘’, options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) -> List[QObject] findChildren(self, type, QRegExp, options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) -> List[QObject] findChildren(self, Tuple, QRegExp, options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) -> List[QObject] findChildren(self, type, QRegularExpression, options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) -> List[QObject] findChildren(self, Tuple, QRegularExpression, options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) -> List[QObject]

focusInEvent(self, QFocusEvent)
focusNextChild(self) → bool
focusNextPrevChild(self, bool) → bool
focusOutEvent(self, QFocusEvent)
focusPolicy(self) → Qt.FocusPolicy
focusPreviousChild(self) → bool
focusProxy(self) → QWidget
focusWidget(self) → QWidget
font(self) → QFont
fontInfo(self) → QFontInfo
fontMetrics(self) → QFontMetrics
foregroundRole(self) → QPalette.ColorRole
frameGeometry(self) → QRect
frameSize(self) → QSize
geometry(self) → QRect
getAllUsedTheoryLevels()
Returns

A tuple of all theory levels used

Return type

tuple

getBasis(mixed_name='Mixed')

Get the currently selected basis. If more than one basis set is specified, mixed_name will be returned. If the tab does not allow for specifying multiple basis sets, then this argument may be ignored.

Parameters

mixed_name (str) – The name to return if more than one basis set is specified

Returns

The currently selected basis

Return type

str

getBasisForEid(eid, per_atom_name)

Get the basis set for the specified entry id. If there are per-atom basis sets specified for the structure, the per_atom_name will be returned.

Parameters
  • eid (str) – The entry id

  • per_atom_name (str) – The name to return if per-atom basis sets are specified

Returns

The basis set name, or per_atom_name if per-atom basis sets are specified

Return type

Basis or str

getCommonBasis()

If all structures use the same basis set, return the basis set name. Otherwise, return None.

Returns

The basis set name or None

Return type

str or NoneType

getCommonFunctional()
Returns

If all entries use DFT and have the same functional set, return the functional. Otherwise return None.

Return type

str or None

getCommonMethod()

If all structures use the same method, return the method name. Otherwise, return None.

Returns

The method name or None

Return type

str or NoneType

getCommonTheoryLevel()
Returns

If all current methods are of the same theory level, return the theory level. Otherwise return None.

Return type

str or None

getContentsMargins(self) → Tuple[int, int, int, int]
getDefaultKeywords()

The mmjag default basis set is “”, which would cause a warning, so we set the default basis. Additionally, the mmjag default DFT functional name is “”, which would cause a HF level of theory. Instead, set a default functional of B3LYP-D3.

Returns

A keyword dictionary with the default basis set and functional.

Return type

dict

getFunctional(cur_struc=None)

Get the current DFT functional.

Parameters

cur_struc (input_tab_widgets.ProjEntryTuple) – Current structure to get functional for. If not specified, functional will be returned based on default theory setting.

Returns

The current DFT functional

Return type

str or None

getMethod()

Get the current method.

Returns

The current method

Return type

str

getMethodForEid(eid)

Get the method for the specified entry ID.

Parameters

eid – Entry ID to get method of.

type eid: int

Returns

Method for this entry ID.

Return type

str

getMmJagKeywords()

Return all keywords that should be put into the mmjag handle. This function should be defined in subclasses.

Returns

All keywords that should be put into the mmjag handle

Return type

dict

Raises

schrodinger.application.jaguar.gui.utils.JaguarSettingError – If any settings are invalid.

getNumStructures()
getStructureTitleForJobname()

Get the structure title to be used in the job name. If the tab includes multiple structures, then MULTIPLE_STRUC_JOB_TITLE should be returned. If no structures have been specified yet, then None should be returned.

Returns

The structure title

Return type

str or NoneType

getStructures()

Get all structures loaded into the tab and their associated Jaguar settings

Returns

A list of tuples. Each tuple represents a single structure and contains:

Return type

list

getTheoryLevel()

Get the current theory level

Returns

The current theory level.

Return type

str

getTheoryLevelForEid(eid)

Get the theory level for the specified entry ID.

Parameters

eid – Entry ID to get theory level of.

type eid: int

Returns

Theory level for this entry ID.

Return type

str

grab(self, rectangle: QRect = QRect(QPoint(0, 0), QSize(- 1, - 1))) → QPixmap
grabGesture(self, Qt.GestureType, flags: Union[Qt.GestureFlags, Qt.GestureFlag] = Qt.GestureFlags())
grabKeyboard(self)
grabMouse(self)

grabMouse(self, Union[QCursor, Qt.CursorShape])

grabShortcut(self, Union[QKeySequence, QKeySequence.StandardKey, str, int], context: Qt.ShortcutContext = Qt.WindowShortcut) → int
graphicsEffect(self) → QGraphicsEffect
graphicsProxyWidget(self) → QGraphicsProxyWidget
hasFocus(self) → bool
hasHeightForWidth(self) → bool
hasMouseTracking(self) → bool
hasTabletTracking(self) → bool
height(self) → int
heightForWidth(self, int) → int
heightMM(self) → int
hide(self)
hideEvent(self, QHideEvent)
inherits(self, str) → bool
initPainter(self, QPainter)
inputMethodEvent(self, QInputMethodEvent)
inputMethodHints(self) → Qt.InputMethodHints
inputMethodQuery(self, Qt.InputMethodQuery) → Any
InputTabCoordinateScan.insertAction(self, QAction, QAction)
insertActions(self, QAction, Iterable[QAction])
installEventFilter(self, QObject)
isActiveWindow(self) → bool
isAncestorOf(self, QWidget) → bool
isEnabled(self) → bool
isEnabledTo(self, QWidget) → bool
isFullScreen(self) → bool
isHidden(self) → bool
isLeftToRight(self) → bool
isMaximized(self) → bool
isMinimized(self) → bool
isModal(self) → bool
isRightToLeft(self) → bool
isSignalConnected(self, QMetaMethod) → bool
isVisible(self) → bool
isVisibleTo(self, QWidget) → bool
isWidgetType(self) → bool
isWindow(self) → bool
isWindowModified(self) → bool
isWindowType(self) → bool
keyPressEvent(self, QKeyEvent)
keyReleaseEvent(self, QKeyEvent)
keyboardGrabber() → QWidget
killTimer(self, int)
layout(self) → QLayout
layoutDirection(self) → Qt.LayoutDirection
leaveEvent(self, QEvent)
loadPerAtomSettings(jag_input, eid=None, title=None)

Restore per-atom tab settings from mmjag keywords. This function should be defined in subclasses for any tabs that contain per-atom settings.

Parameters
loadSettings(jag_input)

Restore tab settings from mmjag keywords. This function should be defined in subclasses.

Parameters

jag_input (schrodinger.application.jaguar.input.JaguarInput) – The Jaguar settings to base the tab settings on

locale(self) → QLocale
logicalDpiX(self) → int
logicalDpiY(self) → int
lower(self)
mapFrom(self, QWidget, QPoint) → QPoint
mapFromGlobal(self, QPoint) → QPoint
mapFromParent(self, QPoint) → QPoint
mapTo(self, QWidget, QPoint) → QPoint
mapToGlobal(self, QPoint) → QPoint
mapToParent(self, QPoint) → QPoint
mask(self) → QRegion
maximumHeight(self) → int
maximumSize(self) → QSize
maximumWidth(self) → int
metaObject(self) → QMetaObject
method_changed
metric(self, QPaintDevice.PaintDeviceMetric) → int
minimumHeight(self) → int
minimumSize(self) → QSize
minimumSizeHint(self) → QSize
minimumWidth(self) → int
mouseDoubleClickEvent(self, QMouseEvent)
mouseGrabber() → QWidget
mouseMoveEvent(self, QMouseEvent)
mousePressEvent(self, QMouseEvent)
mouseReleaseEvent(self, QMouseEvent)
move(self, QPoint)

move(self, int, int)

moveEvent(self, QMoveEvent)
moveToThread(self, QThread)
nativeEvent(self, Union[QByteArray, bytes, bytearray], sip.voidptr) → Tuple[bool, int]
nativeParentWidget(self) → QWidget
nextInFocusChain(self) → QWidget
normalGeometry(self) → QRect
objectName(self) → str
objectNameChanged

objectNameChanged(self, str) [signal]

overrideWindowFlags(self, Union[Qt.WindowFlags, Qt.WindowType])
overrideWindowState(self, Union[Qt.WindowStates, Qt.WindowState])
paintEngine(self) → QPaintEngine
paintEvent(self, QPaintEvent)
paintingActive(self) → bool
palette(self) → QPalette
parent(self) → QObject
parentWidget(self) → QWidget
physicalDpiX(self) → int
physicalDpiY(self) → int
pos(self) → QPoint
previousInFocusChain(self) → QWidget
projectUpdated()

When the project is updated, update the selected entries table

property(self, str) → Any
pyqtConfigure(...)

Each keyword argument is either the name of a Qt property or a Qt signal. For properties the property is set to the given value which should be of an appropriate type. For signals the signal is connected to the given value which should be a callable.

raise_(self)
receivers(self, PYQT_SIGNAL) → int
rect(self) → QRect
releaseKeyboard(self)
releaseMouse(self)
releaseShortcut(self, int)
removeAction(self, QAction)
removeEventFilter(self, QObject)
render(self, QPaintDevice, targetOffset: QPoint = QPoint(), sourceRegion: QRegion = QRegion(), flags: Union[QWidget.RenderFlags, QWidget.RenderFlag] = QWidget.RenderFlags(QWidget.DrawWindowBackground | QWidget.DrawChildren))

render(self, QPainter, targetOffset: QPoint = QPoint(), sourceRegion: QRegion = QRegion(), flags: Union[QWidget.RenderFlags, QWidget.RenderFlag] = QWidget.RenderFlags(QWidget.DrawWindowBackground|QWidget.DrawChildren))

repaint(self)

repaint(self, int, int, int, int) repaint(self, QRect) repaint(self, QRegion)

reset()

Reset any structure specific settings in the table. (The non-struture specific settings will be reset via loadSettings())

resize(self, QSize)

resize(self, int, int)

resizeEvent(self, QResizeEvent)
restoreGeometry(self, Union[QByteArray, bytes, bytearray]) → bool
saveGeometry(self) → QByteArray
saveSettings(jag_input, eid)

Save tab settings in jaguar handle. It is only used for settings which are not defined using keywords (typically per-atom settings). This function should be defined in subclasses for any tabs that contain per- atom settings.

Parameters
InputTabCoordinateScan.scroll(self, int, int)

scroll(self, int, int, QRect)

sender(self) → QObject
senderSignalIndex(self) → int
setAcceptDrops(self, bool)
setAccessibleDescription(self, str)
setAccessibleName(self, str)
setAttribute(self, Qt.WidgetAttribute, on: bool = True)
setAutoFillBackground(self, bool)
setBackgroundRole(self, QPalette.ColorRole)
InputTabCoordinateScan.setBaseSize(self, int, int)

setBaseSize(self, QSize)

InputTabCoordinateScan.setContentsMargins(self, int, int, int, int)

setContentsMargins(self, QMargins)

setContextMenuPolicy(self, Qt.ContextMenuPolicy)
setCursor(self, Union[QCursor, Qt.CursorShape])
setDisabled(self, bool)
setEnabled(self, bool)
setFixedHeight(self, int)
setFixedSize(self, QSize)

setFixedSize(self, int, int)

setFixedWidth(self, int)
setFocus(self)

setFocus(self, Qt.FocusReason)

setFocusPolicy(self, Qt.FocusPolicy)
setFocusProxy(self, QWidget)
setFont(self, QFont)
setForegroundRole(self, QPalette.ColorRole)
setGeometry(self, QRect)

setGeometry(self, int, int, int, int)

setGraphicsEffect(self, QGraphicsEffect)
setHidden(self, bool)
setInputMethodHints(self, Union[Qt.InputMethodHints, Qt.InputMethodHint])
setLayout(self, QLayout)
setLayoutDirection(self, Qt.LayoutDirection)
setLocale(self, QLocale)
setMask(self, QBitmap)

setMask(self, QRegion)

setMaximumHeight(self, int)
InputTabCoordinateScan.setMaximumSize(self, int, int)

setMaximumSize(self, QSize)

setMaximumWidth(self, int)
setMinimumHeight(self, int)
InputTabCoordinateScan.setMinimumSize(self, int, int)

setMinimumSize(self, QSize)

setMinimumWidth(self, int)
setMouseTracking(self, bool)
setObjectName(self, str)
setPalette(self, QPalette)
setParent(self, QWidget)

setParent(self, QWidget, Union[Qt.WindowFlags, Qt.WindowType])

setProperty(self, str, Any) → bool
setShortcutAutoRepeat(self, int, enabled: bool = True)
setShortcutEnabled(self, int, enabled: bool = True)
InputTabCoordinateScan.setSizeIncrement(self, int, int)

setSizeIncrement(self, QSize)

setSizePolicy(self, QSizePolicy)

setSizePolicy(self, QSizePolicy.Policy, QSizePolicy.Policy)

setStatusTip(self, str)
setStyle(self, QStyle)
setStyleSheet(self, str)
InputTabCoordinateScan.setTabOrder(QWidget, QWidget)
setTabletTracking(self, bool)
setToolTip(self, str)
setToolTipDuration(self, int)
setUpdatesEnabled(self, bool)
setVisible(self, bool)
setWhatsThis(self, str)
setWindowFilePath(self, str)
setWindowFlag(self, Qt.WindowType, on: bool = True)
setWindowFlags(self, Union[Qt.WindowFlags, Qt.WindowType])
setWindowIcon(self, QIcon)
setWindowIconText(self, str)
setWindowModality(self, Qt.WindowModality)
setWindowModified(self, bool)
setWindowOpacity(self, float)
setWindowRole(self, str)
setWindowState(self, Union[Qt.WindowStates, Qt.WindowState])
setWindowTitle(self, str)
sharedPainter(self) → QPainter
show(self)
showEvent(self, QShowEvent)
showFullScreen(self)
showMaximized(self)
showMinimized(self)
showNormal(self)
signalsBlocked(self) → bool
size(self) → QSize
sizeHint(self) → QSize
sizeIncrement(self) → QSize
sizePolicy(self) → QSizePolicy
stackUnder(self, QWidget)
startTimer(self, int, timerType: Qt.TimerType = Qt.CoarseTimer) → int
staticMetaObject = <PyQt5.QtCore.QMetaObject object>
statusTip(self) → str
strucSourceChanged
structureChanged
style(self) → QStyle
styleSheet(self) → str
tabletEvent(self, QTabletEvent)
testAttribute(self, Qt.WidgetAttribute) → bool
thread(self) → QThread
timerEvent(self, QTimerEvent)
toolTip(self) → str
toolTipDuration(self) → int
tr(self, str, disambiguation: str = None, n: int = - 1) → str
underMouse(self) → bool
ungrabGesture(self, Qt.GestureType)
unsetCursor(self)
unsetLayoutDirection(self)
unsetLocale(self)
update(self)

update(self, QRect) update(self, QRegion) update(self, int, int, int, int)

updateGeometry(self)
updateMicroFocus(self)
updatesEnabled(self) → bool
useFromComboChanged()

Respond to the user changing the structure source (from included to selected or vice versa).

usingSelected()

Return True if the tab is set to use selected entries. False if the tab is set to use included entries.

validate()

Make sure that the tab settings will allow a job to be run successfully. Note that this validation should not be redundant with that performed in getMmJagKeywords. Any tab setting that prevents valid mmjag keywords from being generated should cause getMmJagKeywords to raise a JaguarSettingError. Any tab setting that allows mmjag keywords to be successfully generated but will result in a job failure should cause a validate fail. This function should be defined in subclasses if validation is needed.

Returns

If the validation passes, None is returned. If the validation fails, a string that describes the error is returned.

Return type

str or NoneType

visibleRegion(self) → QRegion
warning(msg)

Display a warning dialog with the specified message

Parameters

msg (str) – The message to include in the warning dialog

whatsThis(self) → str
wheelEvent(self, QWheelEvent)
width(self) → int
widthMM(self) → int
winId(self) → sip.voidptr
window(self) → QWidget
windowFilePath(self) → str
windowFlags(self) → Qt.WindowFlags
windowHandle(self) → QWindow
windowIcon(self) → QIcon
windowIconChanged

windowIconChanged(self, QIcon) [signal]

windowIconText(self) → str
windowIconTextChanged

windowIconTextChanged(self, str) [signal]

windowModality(self) → Qt.WindowModality
windowOpacity(self) → float
windowRole(self) → str
windowState(self) → Qt.WindowStates
windowTitle(self) → str
windowTitleChanged

windowTitleChanged(self, str) [signal]

windowType(self) → Qt.WindowType
workspaceChanged(what_changed)

Update the table whenever the workspace changes in case the user changed the charge of a molecule.

Parameters

what_changed (str) – A flag indicating what changed in the workspace

x(self) → int
y(self) → int